sailing knives
-
Spyderco - Delica 4 - Satin CPM-SPY27 & Cobalt Blue FRN - C11PCBL - knife
One of the first lightweight folding knives with a carry clip, the Spyderco Delica® 4 is one of the brand's most popular and iconic models. In this special edition, the design is further enhanced by the use of exclusive CPM® SPY27® steel, developed in close collaboration with Crucible® Industries.
This is an advanced powder metallurgy steel that enhances the already high-performance formula of cobalt-enriched VG-10 by incorporating niobium, nitrogen, and higher amounts of carbon, molybdenum, and vanadium. The result is a material that offers an exceptional balance of edge retention, corrosion resistance, toughness, and ease of resharpening.
The PlainEdge™ full flat blade with a satin finish makes the most of these properties, while the FRN (glass-reinforced nylon fiber) handle, injection molded in the characteristic cobalt blue of the SPY27 line, ensures lightness and strength. The knife features a back lock mechanism and a four-position clip, configurable for tip-up or tip-down carry on either side.
Intended use: Sports
Type of production: industrial
Blade: CPM-SPY27 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with stainless steel liners
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 108mm.
Total length: 181mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: -C11PCBL -
Spyderco - Delica 4 Flat Plain - K390 Blue FRN - C11FPK390 - knife
Intended use: Sports
Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC11FPK390 -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Delica 4 FRN - C11PBK - knife
Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -
2263P -
Spyderco - Tasman Salt Knife - H1 - C106SBK - PRIVATE COLLECTION - Knife
Origin: Withdrawn from a private owner, previously purchased and used
Condition: Overall in good condition, showing minor marks and scratches on the blade and clip
Availability: Discontinued
Sharpening: Blade resharpened and polished
Blade marks: Small signs of wear, especially on the right side
Handle marks: Wear marks on the clip, with partially removed paint
Box: /
Sheath: /
Manuals, Certificates, and Warranties: /
Checked and certified by our internal laboratory
The Spyderco Tasman Salt C106SBK is a folding knife designed to tackle the toughest challenges in marine environments and water-related activities. This version, identified by product code C106SBK, features a Hawkbill blade made of H-1 steel, completely corrosion-resistant, ideal for pull cuts and tough materials like ropes and nets. The black FRN (Fiberglass Reinforced Nylon) handle ensures a secure grip even when wet, while the back lock mechanism provides stable and safe use. Although officially discontinued, the Tasman Salt C106SBK remains a sought-after piece among collectors and professionals due to its unique combination of performance and durability, making it perfect for daily use in maritime settings.
Intended use: Marine activities, fishing, water sports
Production type: Industrial
Country of origin: Japan
Blade: Corrosion-resistant H-1 steel
Blade finish: Satin
Handle: Black FRN (Fiberglass Reinforced Nylon)
Blade length: 75 mm
Blade thickness: 2.5 mm
Closed length: 107 mm
Total length: 173 mm
Closed thickness: Information not available
Weight: 57 g
Lock: Back lock
Clip: Titanium, reversible for tip-up carry
Packaging: No packaging
Notes: Hawkbill blade for pull cuts; fully rust-resistant H-1 steelAP-C106SBK -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Emerson - Mini A-100 - Black G10 - MINIA100SF - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel 154CM
Blade finish: dual tone (satin and stone washed)
Country of manufacture: USA
Handle: G10 and titanium liners
Blade length: 76mm.
Blade thickness: 3.2mm.
Length closed: 104mm.
Total length: 183mm.
Weight: 114g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: Collected specimen from private collection, absolutely like newAP-EM-MA100 -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG -
Spyderco - Delica 4 Wharncliffe Plain - C11FPWCBK - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory
Intended use: Sports
Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpeningAP-C11FWCBK -
Spyderco - Tasman Salt - C106PYL - knife
Spyderco - Tasman Salt - C106PYL - knife
Intended Use: Dive / Sports
Type of production: industrial
Blade: Stainless nitrogen H1
Treatment Lama: -
Blade Production: Japan
Handle: FNR
Blade length: 75mm.
Blade Thickness: 2mm.
Closed Length: 100mm.
Total length: 172mm.
Balance: -
Weight: 56g.
Closure: Back Lock
Clip: removable and reversible stainless steel
Sheath: -
Note: This knife has a steel blade PH (precipitation hardened) that will not rust as it contains only 0.15% carbon and about 0.10% on the nitrogen making it particularly suitable for use underwater and marine. The product ratings are therefore no data considering this primary use.3651

















