sailing knives
-
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Delica 4 Flat Plain - K390 Blue FRN - C11FPK390 - knife
Intended use: Sports
Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC11FPK390 -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Gray FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 94g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC10FPGY -
Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10SBK -
Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in good condition
Available in the market: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES, Spyderco box but with incorrect product code
Checked and Certified by our internal laboratory
Intended use: SportsType of production: industrial
Blade: in VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Stainless Steel
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balance: -
Weight: 161g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Sheath: -
Notes: -AP-C10S -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG -
Spyderco - Delica 4 Wharncliffe Plain - C11FPWCBK - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory
Intended use: Sports
Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpeningAP-C11FWCBK -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB -
Spyderco - Matriarch 2 - C12SBK2 - knife
Spyderco - Matriarch 2 - C12SBK2 - knife
Intended Use: EDC / Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -C12SBK2 -
Spyderco - Tusk Sailing Knife - C06TI
Intended use: sailboat
Type of production: Industrial
Production Blade: Taiwan
Blade: stainless nitrogen LC200N
Treatment Blade: -
Handle: Titanium
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 119g.
Lock: Frame Lock the blade and Ceramic Ball Lock on scioglinodi
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: With schackle key and marlin spike10873 -
Spyderco - Dragonfly 2 Salt Yellow - C28YL2 - knife
Intended Use: Sport / Sub
Blade: Stainless H1 nitrogen
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: Resistant to rust and oxidation10130 -
Spyderco - Lil Matriarch coltello - C162SBK - coltello
Spyderco - Lil Matriarch knife - C162SBK - knife
Intended use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Thick when closed: -
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -11000 -
Spyderco - Delica 4 FRN - C11PBK - knife
Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -
2263P -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S -
Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: Acciaio Inox
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Bilanciatura: -
Peso: 161g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -3669 -
Spyderco - Pacific Salt Black - C91SBK2 - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699B -
Spyderco - Pacific Salt Yellow - C91SYL - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699 -
Spyderco - Tasman Salt - C106PYL - knife
Spyderco - Tasman Salt - C106PYL - knife
Intended Use: Dive / Sports
Type of production: industrial
Blade: Stainless nitrogen H1
Treatment Lama: -
Blade Production: Japan
Handle: FNR
Blade length: 75mm.
Blade Thickness: 2mm.
Closed Length: 100mm.
Total length: 172mm.
Balance: -
Weight: 56g.
Closure: Back Lock
Clip: removable and reversible stainless steel
Sheath: -
Note: This knife has a steel blade PH (precipitation hardened) that will not rust as it contains only 0.15% carbon and about 0.10% on the nitrogen making it particularly suitable for use underwater and marine. The product ratings are therefore no data considering this primary use.3651