Year 2022

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Tomahawk withdrawn from private collection, no longer in production by Boker - In excellent condition, no signs of wear, still has the original factory sharpening - Checked and certified by our in-house laboratory.

Intended Use: Tactical/Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: G-10
Blade length: 55mm.
Blade thickness: 6.2mm.
Total length: 230mm.
Weight: 576g.
Sheath: Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Dj Urbanowsky

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available: Discontinued - the company has permanently ceased operations.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, new and perfect
* Scabbard: Present, like new.
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory


Intended Use: hiking / utility

Production type: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment
Notes: knife like new, withdrawn from private collection

The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.

Intended Use: Utility

Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty