Year 2022
-
Cold Steel - Leatherneck Bowie - D2 Black - FX-LTHRNK - knife
Intended Use: Tactical / Heavy Duty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -CSFX-LTHRNK -
Cold Steel - 4 Max Scout - Flat Dark Earth and Black Blade - 62RQ-DEBK - folding knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Black Coating
Handle: Griv-Ex™
Blade Length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS62RQ-DEBK -
Cold Steel - Leatherneck Bowie - Lynn Thompson Limited Edition - 39LSFCAA - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on boxCS39LSFCAA -
Cold Steel - Engage Knife - 2.5" Clip Point Atlas Lock - FL-25DPLC - knife
Intended Use: Sporting / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS-FL-25DPLC -
Cold Steel - 4 Max Scout knife - OD Green Stone Washed - 62RQ-ODSW - folding knife
Intended Use: Sport/Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Stone Wash
Handle: Griv-Ex™
Blade length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS62RQ-ODSW -
Cold Steel - Luzon Black & OD Green - Medium Flipper - 20NQL-ODBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: Black Tuff-Ex coating
Handle: GFN (Glass Filled Nylon)
Blade length: 102mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 229mm.
Weight: 101g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: removable, made of GFN (Glass Filled Nylon)
Packaging: cardboard box with Cold Steel logos
Notes: Carson Flipper opening systemCS20NQL-ODBK -
Cold Steel - SRK Compact OD Green - Survival Rescue Knife - 49LCKD-ODBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-ODBK -
Cold Steel - SRK Compact Tan - Survival Rescue Knife - 49LCKD-DTBK - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: SK-5 carbon steel
Blade finish: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 241mm.
Balance: backward
Weight: 142g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKD-DTBK -
Cold Steel - Engage 3.5" Clip Point - S35VN Atlas Lock - FL-35DPLC - knife
Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.
Intended Use: Sporting/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CSFL35DPLC -
Cold Steel - Razor Tek 6.5" - Black GFN - FX-65RZR - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -CSFX-65RZR -
Cold Steel - Air Lite Tanto - CS26WT - Black G10 - folding knife
We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.
What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.
Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!
Intended Use: Sporty / EDCProduction type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS26WT -
Cold Steel - SR1 Clip Point knife - S35VN - 62L OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62L -
Cold Steel - SR1 Tanto Point knife - S35VN - 62LA OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62LA -
Cold Steel - SR1 Lite Tanto Point knife - 62K1A - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1A -
Cold Steel - SR1 Lite knife - 62K1 - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1 -
Cold Steel - Mini Tuff Lite knife - Green - 20MTGD - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: Satin finish
Handle: Grivory (Griv-Ex)
Blade length: 35mm.
Blade thickness: 3mm.
Closed length: 76mm.
Total length: 126mm.
Weight: 41g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Cold Steel logos
Note: -CS20MTGD -
Kyocera - Utility Knife 11cm - KyoTop Ceramic Made in Japan - KT-110-HIPD - kitchen knife
Winner of the prestigious and international Good Design Award 2001 for the originality and functionality of its design.
- 11 cm black Ishi-Ba Sandgarden HIP ceramic blade. worked with motifs that recall those of Japanese karesansui and subjected to High Isostatic Pressing (HIP). Suitable for cutting fruit, vegetables, small meats
- Wooden handle
Quality made in Japan since 1984With Kyocera ceramic knives, cooking becomes pure pleasure. Their special features:
- ultra-sharp zirconia ceramic blade, hand ground
- extremely robust and corrosion resistant blade
- high-tech material with excellent resistance to wear
- absolute cutting precision thanks to the smooth and compact surface of the blade
- maximum lightness and extreme practicality thanks to the ergonomic handleThe Ten Secrets of Ishi-Ba:
* does not carry tastes and smells
* is made of inert material
* does not cause chemical reactions with food
* avoids unpleasant flavors of metal
* does not rust
* does not deteriorate
* has no oxidizable parts
* it is easy to wash, just rinse it
* it is very light and easy to handle
* stays perfectly sharp, even for yearsThe origin of the management of the Kyocera Group is the Kyocera philosophy, a life philosophy based on the real life experiences and rules of thumb of Kazuo Inamori, founder and president emeritus of Kyocera Corporation. With the question "What is the right thing to do as a human being?" as a primary criterion, Kyocera's philosophy describes the significance of striving for proper management and acting in accordance with human ethical and moral values and fundamental social norms.
BEFORE USING THE KNIFE, READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM
This knife will work for several years without any problems if:
• Removes it from the knife holder or drawer
• Uses it for straight cuts to be made on a cutting board
• Washes and dries it
• Puts it back into the knife holder or drawer after useUSE
Ideal for cutting boneless fruit, vegetables and meats
The term vegetables and fruit is generic: not all types of fruit or vegetables that are not recommended can be listed, but it is strictly not recommended to use them on dutra fruit and vegetables (pumpkin, coconuts, etc.)
Always use a plastic or wooden cutting board; avoid cutting on marble, stone, plates or tiles To chop, separate and de-bone, as well as to cut hard, frozen foods, bread with crust and cheeses, you always use your traditional steel knives. These types of cuts require bending and twisting and, for this reason, it is better to use a more flexible material than ceramic.
For its protection, the tip and base of the blade are not sharpCLEANING
Hand wash with water and dish soap.
Kyocera ceramic knives with plastic handles are dishwasher safe. They should be placed in the compartment dedicated to ladles and small accessories in the upper basket, avoiding contact with other metal utensils. Kyocera ceramic knives with wooden handles are not dishwasher safe.
If discoloration occurs that does not go away with normal cleaning, wash the blade (not the handle) with a mild bleach solution.TO AVOID
Do not drop on hard surfaces.
Do not use the tip as a pivot point, the sharp end could penetrate the cutting board, get stuck and break Do not expose the blade to direct flame (ceramic is a heat conductor). Do not use the side of the blade to crush garlic or other foods.STORAGE
You place it in a knife holder, sheath or drawer. When placing or removing the knife from the holder, be careful not to damage the tip of the blade.USURY
Over time, all knives lose their sharpness. A soft metal (stainless steel) blade "slips" when it loses its sharpness. Harder metals (such as carbon steel) stay sharp longer, but lose sharpness differently. Harder materials, instead of "slipping", tend to chip slightly.
In the beginning, the ceramic is sharper - and stays sharp for longer. Over time, small incisions may occur on the lo of the blade. This is the normal process whereby all hard material blades lose their sharpness.
Despite their appearance, the existence of small incisions does not necessarily mean that the knife is not sharp. You may find that it works flawlessly over an extended period of time.
When the performance of the knife is no longer the desired one, the Kyocera sharpening process will ensure that your knife returns to having a well-sharpened blade.KT-110-HIPD -
Kyocera - Adjustable Beech Universal Grinder
Kyocera adjustable grinder.
It is not a simple grinder. Its secret? The core is made of ceramic/Zirconium, a pure, durable material, 50% harder than steel, with hardness close to diamond, super performingw is perfect not only for salt and pepper, but also for sesame seeds, flax seeds, and a wide variety of spices.
Constructed with microscopic precision and polished to perfection, the grinder mechanism allows for a perfect grind, offering a long-lasting cut. Great for coarse and wet salt, peppercorns and all kinds of spice seeds and herb flakes.
Features:
Guarantees fresh aroma and flavor at all times and is adjustable.
Avoids unpleasant metal flavors and does not rust.
Maintains sharpness and hardly flattens the blade.
Measurements:
height: 15.50 cm.
daimeter: 6 cm.
Available in light beech wood.
CM35WLB -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Cold Steel - Vintage Original Tanto SAN MAI - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.
* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.AP-TAN-SM -
Cold Steel - Espada XL knife - PRIVATE COLLECTION - 62NX - knife
Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -AP-62NX -
Cold Steel - Vintage Original Brass Tanto - Made in Japan - PRIVATE COLLECTION - 13A - knife
Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13ACP -
Cold Steel - Vintage Gen I Trailmaster - Made in USA - PRIVATE COLLECTION - 16 - knife
Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.16CP -
Cold Steel - Vintage Original Magnum Tanto - Made in Japan - PRIVATE COLLECTION - 13M - knife
Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collection
Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13MCP -
Cold Steel - Recon Tanto Carbon V - Made in USA - PRIVATE COLLECTION - 13RT - knife
Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.
Intended use: collection / tactical / sportingProduction type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new13RTCP