Zero Tolerance
-
Zero Tolerance - MUDD Folding Knife - ZT0500 - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model no longer in production.
The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.
The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.
The handle is made of aluminum with textured G-10 grips, providing a solid grip.
This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.
NOS FULL SET KNIFE, NEW FROM STOCK
Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratoryAP-ZT0500 -
Zero Tolerance - Scavenger Matte knife Black - PRIVATE COLLECTION - ZT0400 knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria ColliniIntended use: Tactical / Military
Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening systemAP-ZT0400CP -
Zero Tolerance - Tan DLC Titanium Flipper - Sprint Run - ZT0095TANBLK - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks lastZT0095TANBLK -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Matte Black - ZT0392BLK - knife
Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.Use: Collection / Sports
Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by FlipperZT0392BLK -
Zero Tolerance - Matte Black Titanium Flipper - ZT0095S90BLK - knife
Intended use: sports / tactical
Type of production: Industrial
Production Country: USA
Blade: In-CPM S90V stainless steel
Blade Treatment: matt black DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3 mm.
Closed Length: 123mm.
Overall length: 213mm.
Thickness when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run in 2017 in a limited edition - Opening KVT on ball bearings - Opening Carson Flipper SystemZT0095S90BLK -
Zero Tolerance - Sinkevich Flipper - G10 Sprint Run - ZT0452G10 - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel 59/61HRC
Blade finish: dual tone - stonewashed and satin
Handles: rose bronze titanium and black G10
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: 2017 Sprint Run Edition - Design by Dmitry Sinkevich - Opening on KVT ball-bearing systemZT0452G10 -
Zero Tolerance - Rick Hinderer Factory Custom - Purple and Black - ZT0392PURBLKWC - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, and custom parts made specifically by Hinderer in his workshop. Specifically, the entire titanium screws, spacers, clips, cover-clips and all the parties in purple coloration are made entirely by hand.
Intended Use: Collection / Sports
Type of production: Industrial handcrafted pieces
Production Lama USA
Blade: stainless steel M390
Blade treatment: matt black DLC
Handle: Titanium with matte black DLC finish - screws and spacers purple anodized titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Weight: 159g.
Lock: Frame Lock
Clip: Removable, Multiposition, anodized titanium
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper - Curiosity: the warranty certificate is erroneously reported the CTS-204P steel; the company then decided instead to produce the knife using a stainless steel M390ZT0392PURBLKWC -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Black Gray - ZT0392WC - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium Anodized gray with black trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392WC -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Black Green - ZT0392BLKGRN knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392BLKGRN -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Bronze Gold - ZT0392BRNGLD - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392BRNGLD