Agosto 2016

Novità di agosto 2016 - coltelli, torce, tosatrici, spade, articoli cucina, Coltelleria Collini

Kukri Crafts - Service 1 Nepal knife - knife

Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

2 Review(s)

€110.66
Article code: 3611
- Add to Wishlist
- | Add to Compare
Simplehuman - Wall mount sensor mirror ST3002

The simplehuman wall mount sensor mirror lights up automatically as your face approaches. Its tru-lux light system simulates natural sunlight, allowing you to see full color variation, so you'll know when your makeup is color-correct and flawless. The mirror's sturdy stainless-steel telescopic swing arm smoothly extends with effortless adjustability. The distortion-free 5x magnification mirror provides exceptional detail while still allowing you to see your entire face at once. It recharges with standard USB, so no messy cords to keep plugged in and hang down your wall (cable and adapter included). Installs easily since no hard-wiring is needed - screws into the wall like a standard towel bar. Tru-lux light system closely simulates natural sunlight and contains full color spectrum to show every detail Exceptionally bright light Sturdy stainless steel arm provides smooth, effortless adjustability Evenly dispersed light with no light loss or hot spots Touchless sensor activation Uses LED's that will perform like new for many years, so no need to change bulbs 5x magnification is ideal for providing exceptional detail while still allowing you to see your entire face at once No messy cords to take up space on your bathroom countertop or vanity Precise curvature for distortion-free optics, even around the edges Ultra-clear, high-quality glass backed by high-purity aluminum coating provides superior reflectivity and clarity Recharges using a standard USB port (cable and adapter included) Lasts up to 5 weeks between charges with typical use Easy to install (all parts included) 5 year warranty

€172.14
Article code: 5044
- Add to Wishlist
- | Add to Compare
Helle Norway - Skala Foldekniv knife - No.212

Intended use: hunting

Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -

1 Review(s)

€104.92
Notify when available

Article code: HE-212
- Add to Wishlist
- | Add to Compare
iFAVINE - iSommelier pro bk - Smart Decanter

A Closer Look iSommelier is the solution to eliminate all limitations during conventional decanting. It is the first smart decanter using a revolutionary technology that reinvents the decanting experience to enhance the flavors and aromas of the wine in just a few minutes. iSommelier also softens the tannins and transports the wine to a stage of maturity that would otherwise require years of cellaring. An Unique Technology Purified & Highly Concentrated Oxygen iSommelier filters the ambient air to remove any impurities (moisture, dust, odors) and isolates oxygen from nitrogen and carbon dioxide. It aerates wine with a constant flow of purified and highly concentrated oxygen thanks to its advanced oxygen extraction system which uses no chemicals. Constant Flow of Purified and Concentrated Oxygen Decanting wine with a purified oxygen significantly increases the efficiency of this process in terms of time and quality: iSommelier eliminates most of the air pollutants and moisture The constant flow of oxygen mitigates the issue of decanting wine at a location with different air pressure This advanced system guarantees that any wine will be served with a constant quality wherever in the world it is decanted Patented Glass Decanter Purified and highly concentrated oxygen flows upwards into the specially designed tube inside our patented decanter. It then reverses direction, and flows downwards and back out into every milliliter of the wine. Softer Tannins and Enhanced Aromas The specially designed glass decanter evenly diffuses oxygen throughout the entire volume of wine, rather than just the surface: It truly completes oxygenation It rounds out tannins providing a smooth mouthfeel It sublimes all aromas revealing the full potential of the wine Time Efficiency iSommelier reduces the decanting time from hours to only minutes, keeping the full flavors and aromas of the wine that winemaker wants to deliver to your palate. It also allows to have better control of the serving temperature of the wine being less exposed to ambient temperature.Preserved Flavors and Aromas Unlike traditional decanting that inhibits some flavors and aromas and limits the full potential of the wine over time, iSommelier: Shortens the decanting time to prevent wine from a long exposure to damaging elements and ambient temperature Preserves all the complex flavors and aromas released simultaneously during oxygenation

1 Review(s)

€655.70
Notify when available

Article code: P1005
- Add to Wishlist
- | Add to Compare

iFAVINE - Decanter for iSommelier 200ml

iFAVINE - Decanter for isommelier 200ml Distributes oxygen in the decanter and strengthen and enhance the wine Color: Glass Dimensions: 15.1 x 9.5 cm (HxW) Weight: 0,189 kg IFAVINE glass decanter distributes oxygen in the carafe. Perfect oxygenation Softens tannins Amplifier flavor and enhance the wine

€57.54
Article code: P1005-D
- Add to Wishlist
- | Add to Compare
Benchmade - 810 Contego by Osbourne - Axis Lock Knife - Knife
The Contego folders are beautiful and well made all purpose tools. The M4 steel is much sought after and the Osborne style is just superb in the world of production knives. The 810 Contego is packed with features to help get any job done. Latin for "protect" or "shield," the Contego tactical folder is built with toughness and durability for any occasion. Reverse Tanto for toughness, large-bellied blade for all the utility cutting you can throw at it, heavily milled and textured G10 scales to help you get a firm grip on any situation, and a carbide glass breaker for use in a real bind. All these features in one elegant, tactical package.
- Blade Length: 3.98" (10.11 cm)
- Blade Thickness: 0.156" (3.96 mm)
- Blade Material: CPM-M4 Super Steel
- Blade Hardness: 62-64HRC
- Blade Style: Reverse Tanto
- Weight: 5.92 oz. (167.7 g)
- Lock Mechanism: Axis Lock
- Overall Length: 9.28" (23.57 cm)
- Closed Length: 5.30" (13.46 cm)
- Made in the USA
€176.23
Notify when available

Article code: BM-810BK
- Add to Wishlist
- | Add to Compare
Nitecore - HC60 Cree XM-L2 U2 - 1000 Lumens - Rechargeable LED Headlamp

Questa torcia è dotata di un pratico sistema di ricarica integrato tramite plug MicroUSB che permette di ricaricare batterie di tipo 18650 (1x 18650 da 3400mAh inclusa nella confezione)

Potenze e durate certificate da standard ANSI/NEMA FL1 testate con 1x 18650 3.6V da 3400mAh

LED: 1x Cree XM-L2 U2 con ciclo vitale di 50,000 ore
Output 5 output luminosi costanti, regolati digitalmente e selezionabili premendo l'apposito pulsante switch mode e 3 segnalazioni (police warning, S.O.S., location beacon)
Potenze e durate: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Portata: fino a 117mt.
Picco di potenza: 3400 candele
Batterie utilizzabili: 1x 18650 da 3.7V (inclusa nella confezione) o 2x CR123A da 3.0/3.7V usa e getta o ricaricabili
Dimensioni torcia: 86x35 mm.
Peso: 130g (senza batteria)
Lente: in vetro indurito con trattamento anti riflesso
Corpo: in alluminio aeronautico
Finitura: anodizzata, Type III
Cinghia: elastica, regolabile in diametro ed in altezza
Note: resistente all'acqua come da standard IPX-8, immergibile a 2mt. di profondità per 30min.
Accessori: 1x Batteria 18650 3.7V da 3400mAh - cavo di ricarica USB/MicroUSB - cinghia elastica frontale - o-ring di ricambio
Sistema Integrato di Ricarica: attraverso la porta MicroUSB integrata - protetta da una copertura isolata - e utilizzando il cavo Micro-USB fornito di serie è possibile provvedere alla ricarica della batteria in dotazione, l'operazione è monitorabile grazie ad un apposito led luminoso posto accanto sotto i pulsanti di selezione luminosa. Il cavo di ricarica può essere attaccato a qualsiasi PC dotato di porta USB o a qualsiasi alimentatore da parete o da accendisigari dotato di porta USB.

7 Review(s)

€51.64
Notify when available

Article code: NI-HC60
- Add to Wishlist
- | Add to Compare
Nitecore - EH1 Cree XP-G2 S3 - 260 Lumens - Explosion Proof Rechargeable LED Headlamp

La torcia antideflagrante EH1 è stato progettata per l'utilizzo professionale in ambienti di lavoro in cui la presenza di gas e vapori di varia natura si associa ad un alto rischio di esplosioni, come ad es. le industrie petrolchimiche e farmaceutiche. La EH1 è classificata come apparecchio elettrico a prova di esplosione di Tipo II (non è adatta all'uso in miniere) e torcia non generante esplosioni di Classe D. Può essere utilizzata in aree pericolose (Zona 1, Zona 2, Tipo IIA, IIB, IIC, livelli T1 - T5 ed è classificata GB3836). La EH1 può anche fornire illuminazione in luoghi come fabbriche, stazioni, stadi, gallerie ferroviarie e cantieri.

E' dotata dell'Advanced Temperature Regulation in grado di regolare la luminosità in accordo con la temperatura del corpo torcia, evitando il surriscaldamento e prolungando la durata delle batterie.

Potenze e durate certificate da standard ANSI/NEMA FL1 testate con 2x 18650 3.6V da 3400mAh

LED: 1x Cree XP-G2 S3 con ciclo vitale di 50,000 ore + 4 Led Rossi
Output 3 output luminosi costanti, regolati digitalmente e selezionabili premendo l'apposito pulsante switch mode e 2 segnalazioni (S.O.S., location beacon) + Luce rossa + Flash Rosso
Potenze e durate: 22 lumen (120 h.) -> 65 lumens (40 h.) -> 260 lumens (10 h.) -> S.O.S. -> Beacon
Portata: fino a 205mt.
Picco di potenza: 10500 candele
Batterie utilizzabili: 2x 18650 da 3.7V da 3400mAh (non removibili - incluse nella confezione)
Dimensioni torcia: 83x83 mm.
Peso: 191g (batterie incluse)
Lente: in vetro indurito con trattamento anti riflesso
Corpo: Polimeri
Note: Antideflagrante come da standard internazionale Ex Mark Ex ib IIB T5 Gb - resistente all'acqua come da standard IPX-8, immergibile a 2mt. di profondità per 30min.
Accessori: 2x Batteria 18650 3.7V - cavo di ricarica USB - attacco adesivo - attacco per elmo
Sistema Integrato di Ricarica: attraverso un sistema ad induzione magnetico integrato, utilizzando il cavo USB fornito di serie; l'operazione è monitorabile grazie ai 4 led rossi integrati che indicano la percentuale di carica raggiunta e residua delle due batterie integrate. Il cavo di ricarica può essere attaccato a qualsiasi PC dotato di porta USB o a qualsiasi alimentatore da parete o da accendisigari dotato di porta USB.

€86.07
Article code: NI-EH1
- Add to Wishlist
- | Add to Compare

Chris Reeve - Mk IV 28 Year Commemorative knife

Chris Reeve - Mk IV 28 Year Commemorative knife

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

€696.72
Notify when available

Article code: CR-MkIV
- Add to Wishlist
- | Add to Compare
ESEE Knives - Candiru DT knife + guancette in micarta - coltello

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 1095
Trattamento Lama: Textured powder coat Tan
Lunghezza lama: 55mm.
Spessore lama: 3mm.
Impugnatura: guancette in micarta opzionali, montabili all'occorrenza
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 40g.
Chiusura: -
Clip: -
Fodero: ABS e cordura
Confezione: Busta plastica trasparente

€95.90
Notify when available

Article code: 2849
- Add to Wishlist
- | Add to Compare
ExtremaRatio - HF1 T Tanto Black - folding knife

This folding knife is projected for those who are looking for sturdiness and reliability of a fixed blade but also for compact sizes. Its N690 steel blade is available with Drop or Tanto point. For standard use the well known liner lock is enough safe. In case of hard extreme works it is requested to insert the steel pin in the proper hole to cross the handle and the blade, obtaining in this way a sturdy and reliable knife as much as a fixed blade. The steel clip can be removed or even placed on the opposite site of the handle by replacing it with the second supplied clip

Intended use: Tactical / Heavy Folder

type of production: Industrial
Country of production: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 91mm.
Blade thickness: 5.6mm.
Closed Length: 149mm.
Overall length: 240mm.
Thick when closed: -
Weight: 271g.
Lock: Liner Lock system with additional safety latch and screw
Clip: Stainless Steel
Packaging: cardboard box with Extrema Ratio logos

2 Review(s)

€293.44
delivery in 7/10 days (if available from the manufacturer)
Article code: ER-HF1T
- Add to Wishlist
- | Add to Compare
ExtremaRatio - HF1 D Drop Black - folding knife

This folding knife is projected for those who are looking for sturdiness and reliability of a fixed blade but also for compact sizes. Its N690 steel blade is available with Drop or Tanto point. For standard use the well known liner lock is enough safe. In case of hard extreme works it is requested to insert the steel pin in the proper hole to cross the handle and the blade, obtaining in this way a sturdy and reliable knife as much as a fixed blade. The steel clip can be removed or even placed on the opposite site of the handle by replacing it with the second supplied clip

Intended use: Tactical / Heavy Folder

type of production: Industrial
Country of production: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 91mm.
Blade thickness: 5.6mm.
Closed Length: 149mm.
Overall length: 240mm.
Thick when closed: -
Weight: 271g.
Lock: Liner Lock system with additional safety latch and screw
Clip: Stainless Steel
Packaging: cardboard box with Extrema Ratio logos

€293.44
Article code: ER-HF1D
- Add to Wishlist
- | Add to Compare

ExtremaRatio - Nightmare Karambit - Black - folding knife

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

€218.85
Notify when available

Article code: 12621
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Nightmare Karambit - Stone Washed - folding knife

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

€204.92
delivery in 7/10 days (if available from the manufacturer)
Article code: 12622
- Add to Wishlist
- | Add to Compare
ExtremaRatio - Shrapnel OG Satin in San Mai CoS - knife

For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.

A First Production Run of 30 pieces has been made.

SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.

Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate

Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.

Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"

Clad Effect on Cutleries

Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.

Improved corrosion resistance　　　　
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.

Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.

Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..

Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.

Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.

Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.

5 Review(s)

€245.08
Notify when available

Article code: ERCC-SH
- Add to Wishlist
- | Add to Compare
Nitecore - HC70 - Rechargeable Headlamp - 1000 lumens - LED Flashlight

This torch is equipped with a convenient charging system integrated with MicroUSB plug that allows recharging Li-Ion / IMR type 18650 batteries
Powers and durations certified by ANSI / NEMA FL1 standard tested with 2x 18650 3.7V from 3400mAh

LEDs: 1x Cree XM-L2 U2 with life cycle of 50,000 hours
Output 5 constant luminous outputs, digitally controlled and selectable by pressing the button switch mode and 3 warnings (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (220h) -> 65 lumens (30h) -> 240 lumens (10h) -> 550 lumens (4h) -> 1000 (2.15h.)
Capacity: up to 182m.
Power peak: 8300 candles
Usable batteries: 2x 18650 rechargeable 3.7V (not included - buy separately)
Flashlight size: 86x35 mm.
Weight: 98g (without batteries and battery pack)
Lens: hardened glass with anti-reflex treatment
Body: in aerospace aluminum
Finish: anodised, Type III
Strap: elastic, adjustable in diameter and height
Notes: water resistant as standard IPX-8, diving at 2mt. of depth for 30min.
Accessories: Separate battery pack made entirely of aluminum, waterproof, with integrated charging system and also usable as power bank / battery pack for powering and charging electronic devices such as smartphones or tablets - USB / MicroUSB charging cable - front elastic strap - o- replacement ring
Integrated Charging System: Through the integrated MicroUSB port on the battery pack - protected by an isolated cover - and using the supplied Micro-USB cable, it is possible to recharge the 18650 batteries. The charging cable can be attached to any PC equipped with USB port or any wall or cigarette lighter with USB port.

€86.07
Article code: NI-HC70
- Add to Wishlist
- | Add to Compare

Nitecore - HC65 - Frontale Ricaricabile USB - 1000 lumens e 110 metri - Torcia Led

Questa torcia è dotata di un pratico sistema di ricarica integrato tramite plug MicroUSB che permette di ricaricare batterie di tipo 18650 (1x 18650 da 3400mAh inclusa nella confezione)

Potenze e durate certificate da standard ANSI/NEMA FL1 testate con 1x 18650 3.6V da 3400mAh

LED: 1x Cree XM-L2 U2 con ciclo vitale di 50,000 ore
Luce bianca principale: 5 output luminosi costanti, regolati digitalmente e selezionabili premendo l'apposito pulsante switch mode e 3 segnalazioni (police warning, S.O.S., location beacon)
Potenze e durate: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Luce bianca ausiliaria: 26 lumens (25h.)
Luce rossa ausiliaria: 11 Lumens (20h) -> Caution 11 Lumens (32h)
Portata: fino a 110mt.
Picco di potenza: 3000 candele
Batterie utilizzabili: 1x 18650 3400mAh da 3.7V (inclusa nella confezione) o 2x CR123A da 3.0/3.7V usa e getta o ricaricabili
Dimensioni torcia: 82.7x33.3 mm.
Peso: 62.7g (senza batteria)
Lente: in vetro indurito con trattamento anti riflesso
Corpo: in alluminio aeronautico
Finitura: anodizzata, Type III
Cinghia: elastica, regolabile in diametro ed in altezza
Note: resistente all'acqua come da standard IP68, immergibile a 2mt. di profondità per 30min.
Accessori: 1x Batteria 18650 3.7V da 3400mAh - cavo di ricarica USB/MicroUSB - cinghia elastica frontale - o-ring di ricambio
Sistema Integrato di Ricarica: attraverso la porta MicroUSB integrata - protetta da una copertura isolata - e utilizzando il cavo Micro-USB fornito di serie è possibile provvedere alla ricarica della batteria in dotazione, l'operazione è monitorabile grazie ad un apposito led luminoso posto accanto sotto i pulsanti di selezione luminosa. Il cavo di ricarica può essere attaccato a qualsiasi PC dotato di porta USB o a qualsiasi alimentatore da parete o da accendisigari dotato di porta USB.

Clicca il link per visionare una recensione approfondita del modello Nitecore HC65

€65.57
Article code: NI-HC65
- Add to Wishlist
- | Add to Compare
Nitecore - HC70 - Rechargeable Headlamp - 1000 lumens - LED Flashlight

This torch is equipped with a convenient charging system integrated with MicroUSB plug that allows recharging Li-Ion / IMR type 18650 batteries
Powers and durations certified by ANSI / NEMA FL1 standard tested with 2x 18650 3.7V from 3400mAh

LEDs: 1x Cree XM-L2 U2 with life cycle of 50,000 hours
Output 5 constant luminous outputs, digitally controlled and selectable by pressing the button switch mode and 3 warnings (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (220h) -> 65 lumens (30h) -> 240 lumens (10h) -> 550 lumens (4h) -> 1000 (2.15h.)
Capacity: up to 182m.
Power peak: 8300 candles
Usable batteries: 2x 18650 rechargeable 3.7V (not included - buy separately)
Flashlight size: 86x35 mm.
Weight: 98g (without batteries and battery pack)
Lens: hardened glass with anti-reflex treatment
Body: in aerospace aluminum
Finish: anodised, Type III
Strap: elastic, adjustable in diameter and height
Notes: water resistant as standard IPX-8, diving at 2mt. of depth for 30min.
Accessories: Separate battery pack made entirely of aluminum, waterproof, with integrated charging system and also usable as power bank / battery pack for powering and charging electronic devices such as smartphones or tablets - USB / MicroUSB charging cable - front elastic strap - o- replacement ring
Integrated Charging System: Through the integrated MicroUSB port on the battery pack - protected by an isolated cover - and using the supplied Micro-USB cable, it is possible to recharge the 18650 batteries. The charging cable can be attached to any PC equipped with USB port or any wall or cigarette lighter with USB port.

€51.64
Notify when available

Article code: NI-HA40
- Add to Wishlist
- | Add to Compare