american pride

The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued in this steel variant
* Sharpness: Factory-sharpened
* Marks on blade: None
* Marks on handle: Minor cosmetic signs of wear on the clip and screws
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The Microtech Socom Elite is one of the most iconic folding knives produced by Microtech, prized for its combination of durability, ergonomics, and reliability. Designed for professional and tactical use, over the years it has also established itself as a benchmark among collectors and enthusiasts of high-end cutlery.

The model presented here, manufactured in 2019, features a blade made of Carpenter CTS-204P steel, one of the best high-performance stainless steel alloys in its class, known for its excellent edge retention, high corrosion resistance, and outstanding wear resistance. The black/dual-tone finish contributes to its particularly aggressive and professional appearance.

The aluminum handle with non-slip inserts ensures a firm and comfortable grip even under the most demanding conditions, while the manual thumb stud opening system and the proven liner lock mechanism guarantee quick deployment and safety during use.

Thanks to Microtech’s signature build quality and a design that has become an industry classic, the Socom Elite is an excellent choice for both everyday use and for collectors seeking one of the most iconic models in the American brand’s modern lineup.

Intended Use: Tactical, EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: Carpenter CTS-204P stainless steel
Blade Finish: “Normal” (Black PVD + Satin)
Handle: Aluminum with non-slip inserts
Blade Length: 101mm
Blade thickness: 4 mm
Closed length: 127 mm
Overall length: 228 mm
Closed thickness: 15 mm
Weight: 157 g
Lock type: Liner Lock
Clip: Stainless steel, removable
Packaging: Microtech box with manuals
Notes: Previously purchased knife, from a private collection

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, durability, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse middle-finger movements and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Standard (Dual Tone, Satin, and Black PVD)
Handle: Frag Pattern aluminum with Cerakote finish
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, sturdiness, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse movements of the middle finger and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Apocalyptic
Handle: Anodized aluminum
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird."  Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.  

Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.

Intended use: sports/hunting

Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warranties

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: 2012 model withdrawn from a private collection, previously purchased and used, probably carried a lot in a pocket or backpack
* Condition: Mechanically perfect, blade without marks - little use - titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Available on the market: Out of production
* Sharpness: Factory sharp, good, could be improved
* Marks on blade: None
* Marks on handle: Titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates - knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In good condition, shows signs of wear on the titanium and a small mark on the blade that does not compromise its use
* Available on the market: Available to order from the manufacturer in different technical configurations
* Sharpness: Factory sharp
* Marks on blade: a small mark on the blade, possibly due to an impact or a fall
* Marks on handle: several signs of wear on the titanium
* Box: -
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collectible/Sporting

Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium and Bocote
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 156mm.
Weight: 40g.
Closure: Frame Lock
Clip: Titanium
Notes: Mnandi means “very beautiful” in Zulu - knife previously purchased and used

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

Premium materials, fine finishes, and a safety locking system, all in an incredibly light and precise tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm “click” and heirloom quality produced with aerospace tolerances.  The Sebenza 31 adds more refined details to an already very capable knife, taking another steady and reliable step forward.

Intended use: Collectible/Sporting

Type of production: MidTech
Country of production: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Micro-peened 6AL4V titanium with macassar ebony wood inserts
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Total length: 177.3 mm.
Weight: 85 g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, threadlocker, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, some cosmetic marks on the titanium handle and clip, rear paracord lanyard missing
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Some cosmetic marks on the titanium handle and clip, rear paracord lanyard missing
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The idea behind the Sebenza has always been clear: to create the best pocket knife in the world.

Made with the highest quality materials, fine finishes, and a secure locking system, the Sebenza combines lightness and precision in a unique tool. This philosophy continues today with the new Sebenza 31.

Like its predecessor, it offers the characteristic and reassuring “click” when closing and a quality that is destined to last over time, the result of aerospace-level manufacturing tolerances. With the Sebenza 31, tradition is renewed thanks to even more refined details, marking a further step forward in consistency and reliability.

Intended use: Collection/Sport

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel at 60/62HRC
Blade finish: Stonewashed
Handle: Microblasted 6AL4V titanium
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Total length: 177.3 mm.
Weight: 85 g.
Lock: Frame lock
Clip: Micro-beaded 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, thread lock, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, some cosmetic marks on the titanium handle and clip
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Some cosmetic marks on the titanium handle and clip
* Box: Present and complete
* Sheath: -
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports/collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Lock: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture August 2023

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

Premium materials, fine finishes, and a safety locking system, all in an incredibly light and precise tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm “click” and heirloom quality produced with aerospace tolerances.  The Sebenza 31 adds more refined details to an already very capable knife, taking another steady and reliable step forward.

Intended use: Collectible/Sporting

Type of production: MidTech
Country of production: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Micro-peened 6AL4V titanium with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Overall length: 177.3 mm.
Weight: 85 g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, threadlocker, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: Manufactured in June 2025

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in good condition: mechanically excellent, aesthetically shows signs of use
* Available on the market: Out of production (currently available with different steel variants)
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Minimal signs of use, small abrasions visible against the light
* Marks on handle: Several signs of use on the micarta handle and clip, rear paracord lanyard missing
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The idea behind the Sebenza has always been clear: to create the best pocket knife in the world.

Made with the highest quality materials, fine finishes, and a secure locking system, the Sebenza combines lightness and precision in a unique tool. This philosophy continues today with the new Sebenza 31.

Like its predecessor, it offers the characteristic and reassuring “click” when closing and a quality that is destined to last over time, the result of aerospace-level manufacturing tolerances. With the Sebenza 31, tradition is renewed thanks to even more refined details, marking a further step forward in consistency and reliability.

Intended use: Collection/Sports

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade finish: Stonewashed
Handle: Microblasted 6AL4V titanium
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Total length: 177.3 mm.
Weight: 85 g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, thread lock, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the titanium handle and clip
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: a few imperceptible marks on the titanium handle and clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S45VN stainless steel at 60/62HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture January 2023

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Nylon pouch with zip
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Inspired by the legendary M-48 Patton tank and its four-man crew, the M48 combines military toughness with modern design. A hybrid flipper on bearings, with an aluminum handle, titanium spring, and the new OTL system with reversible clip. Almost 22 cm in total length, this is a truly versatile knife, perfect for everyday use thanks to its hybrid structure.

Equipped with the innovative Magnus Edged tip, hand-sharpened for a unique profile and with fun “Easter Eggs” engraved on the blade and clip for an extra touch of character.

Intended use: EDC / Sports 

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade finish: Tumbled
Handle: PVD aluminum and tumbled titanium
Blade length: 99 mm.
Blade thickness: 3.1 mm.
Closed length: 117 mm.
Total length: 21.8 mm.
Closed thickness: 10.1 mm.
Weight: 105 g.
Closing system: Frame Lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zip pouch, stickers, and morale patch
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: A few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S45VN stainless steel at 60/62HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture August 25, 2022

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, has a couple of small scratches on the titanium clip and some imperceptible abrasions on the titanium
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: A couple of small scratches on the titanium clip and some imperceptible abrasions on the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Mariner 2 – Heritage Series - The perfect EDC, born from legend.

Born in the 1980s from the pioneering vision of Bob Terzuola, the Mariner was conceived as a true EDC to carry every day, without compromise. Today, this revamped version pays homage to the original, combining aesthetics faithful to the spirit of the first model with a modern, compact and legally compliant design under 3".

The new Mariner 2 features a MagnaCut steel blade with a sheepsfoot profile, sharp, durable, and hardened to 64 HRC, set in a grade 5 titanium handle that guarantees strength without bulking up your pocket. Every detail has been carefully crafted: encapsulated ceramic bearings, steel liner lock with insert, 3D milled clip with the legendary dragon head logo, and a machined titanium thumb disc with dovetail joint.

This reissue is not only a tribute to the history of custom design, but also a celebration of mechanical innovation and high-end materials, all precision-crafted in Dallas, Texas. A piece that combines past and future, for those who demand the best from a pocket knife.

Intended use: EDC

Type of production: Industrial
Country of production: Texas, USA
Blade: CPM-MagnaCut 63/64HRC steel
Blade finish: stone washed
Handle: grade 5 titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Closed length: 106m.
Total length: 182mm.
Closed thickness: 11 mm
Weight: 101 g
Closure: Liner lock
Clip: Grade 5 titanium, machined from solid
Packaging: Cardboard box with Tactile Knife Company logos and warranty certificate
Notes: Design by Bob Terzuola - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2020 knife in mint condition
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The ultimate folding companion to the Marine Utility: Fighter Flipper
We believe we have created the best folding knife inspired by the classic Marine Utility ever made. The Fighter Flipper™ is the perfect complement to our famous fixed blade “Fighter.” A unique combination of titanium components and a blade heat-treated to 58 HRC for high performance in any situation.

Solid, decisive, surprisingly versatile: this knife is just as comfortable at work as it is in your pocket during a walk around town. Every detail is designed to impress: from the retro finish of the scales to the drop-point blade, the integrated knob handle, and the pocket clip with integrated ball bearing—a detail never seen before.

In the world of knives, there is nothing comparable to the Fighter Flipper™. A true force of nature that invites you to strike, pierce, and crush. Use it with caution: it unleashes pure power.

Intended use: Tactical/Heavy Duty

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade treatment: Tumbled
Handle: Tumbled Titanium 
Blade length: 85mm.
Blade thickness: 5mm.
Closed length: 115mm.
Total length: 190mm.
Closed thickness: 12.5mm.
Weight: 276g.
Lock: Framelock
Clip: titanium, tumbled finish - removable
Packaging: rigid box with Medford logos, warranty certificates
Notes: Designed and built by Greg Medford - previously purchased product from a private collection

The Chris Reeve Inkosi Large Tanto is the evolution of the iconic Sebenza, designed for those looking for a sturdy and precise folder with a decisive tactical soul. This version features a CPM-MagnaCut steel tanto blade, one of the most modern and high-performance alloys: excellent edge retention, very high corrosion resistance, and superior toughness for truly heavy-duty use.

With its titanium frame lock with hardened steel reinforcement, precision phosphor bronze bearings, and oversized integral spacer, the Inkosi is built to last a lifetime and beyond. The tanto geometry offers exceptional penetration and a reinforced tip, making it ideal for precise cuts and EDC or tactical applications where strength is essential.

Perfect for collectors and enthusiasts who want the best of American engineering in a high-end folding knife.

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC with blue anodized titanium thumbstud
Blade finish: Stonewashed
Handle: Sandblasted 6AI4V titanium with blue anodized titanium lanyard bead
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 142g.
Closure: RIL (Reeve Integral Lock / Frame Lock)
Clip: removable, titanium
Packaging: cardboard box with Chris Reeve logos, warranty certificates, routine maintenance tools
Notes: New item, with certificate dated May 2025

Umnumzaan means “The Chief” in Zulu, and this folding knife lives up to its name in every way. Designed for maximum strength and reliability in your pocket, it combines the strength of a fixed blade with the convenience of a folding knife.

Featuring advanced modifications to the renowned Reeve Integral Lock, it offers increased blade strength, optimized pivot and closure tolerances, and improved overall ergonomics. The hollow-ground blade, heat-treated to maintain elasticity and edge retention, also incorporates a glass breaker when closed, for added functionality in emergency situations.

The Umnumzaan is a bold and innovative folding knife, respected for its ingenious design and ability to tackle any task: proof that the strength of a fixed blade can truly fit in your pocket.

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Sandblasted 6AI4V titanium with blue anodized titanium lanyard pin
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Total length: 212mm.
Closed thickness: 17mm.
Weight: 142g.
Closure: RIL (Reeve Integral Lock / Frame Lock)
Clip: removable, titanium
Packaging: cardboard box with Chris Reeve logos, warranty certificates, routine maintenance tools
Notes: New item, with certificate dated June 12, 2025

Umnumzaan means “The Chief” in Zulu, and this folding knife lives up to its name in every way. Designed to ensure maximum strength and reliability in your pocket, it combines the strength of a fixed blade with the practicality of a folding knife.

Featuring advanced modifications to the renowned Reeve Integral Lock, it offers increased blade strength, optimized pivot and closure tolerances, and improved overall ergonomics. The hollow-ground blade, heat-treated to maintain elasticity and edge retention, also incorporates a glass breaker when closed, for added functionality in emergency situations.

The Umnumzaan is a bold and innovative folding knife, respected for its ingenious design and ability to tackle any task: proof that the strength of a fixed blade can truly fit in your pocket.

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Sandblasted 6AI4V titanium
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Total length: 212mm.
Closed thickness: 17mm.
Weight: 142g.
Closure: RIL (Reeve Integral Lock / Frame Lock)
Clip: removable, titanium
Packaging: cardboard box with Chris Reeve logos, warranty certificates, routine maintenance tools
Notes: New item, with certificate dated June 10, 2025

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection
* Condition: Like new, never used, never taken out of the box and never placed in the sheath.
* Commercially available: Hard to find with this particular briar handle
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present, new, never removed from plastic packaging still sealed.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The Bark River Bushcrafter II is designed to be the ultimate bushcraft knife. The name itself is no accident: careful research has led to an exceptional result that is appreciated by enthusiasts in the field. The blade has an ideal shape for bushcraft activities, while the handle offers excellent ergonomics. Compared to the standard model, the Bushcrafter II is slightly larger, with a blade over an inch longer.

Made of CPM 3V steel, the blade is extremely durable and retains its sharpness for a long time. However, it is not completely stainless, so it should be cleaned after use and occasionally oiled to prevent corrosion. The edge has a convex bevel, which is easy to maintain by sanding.

The handle is made of fine desert ironwood burl, a hardwood from the U.S. and Mexico, featuring an elegant grain that gives the knife a luxurious look. The leather sheath allows for both vertical (belts up to 2 inches) and diagonal carry.

Each Bark River knife is handcrafted and one-of-a-kind.

Intended Use: Hiking / Utility / Bushcraft

Country of manufacture: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burlwood
Blade length: 113mm.
Blade thickness: 4.1mm.
Total length: 233mm.
Weight: 205g.
Sheath: leather, belt
Notes: knife from a private collection, like new, never taken out of its box and never placed in the sheath

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: 2001 knife, discontinued, featuring asymmetrical/chisel sharpening
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small marks from time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Military

Type of production: industrial
Blade: 154CM stainless steel with asymmetric/chisel sharpening
Blade finish: Stone Washed
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 72mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Weight: 92g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: knife from 2001 discontinued, previously purchased, from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Like new, never taken out of its box
* Market Availability: Hard to find
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Original, with logos and accessories
* Sheath: Included
* Manuals, Certificates & Warranty: Complete set included
* Inspected and Certified by our internal laboratory

The Halfbreed Blades HBBLBK01OD is a high-end tactical knife designed to withstand the most extreme conditions. Built with a solid full-tang blade made of Böhler K110 steel, it provides excellent wear resistance and outstanding cutting performance. The 146 mm blade is coated with OD Green Teflon (PTFE), reducing friction and protecting the steel from corrosion.

The handle, made of black G10, ensures a secure grip in any situation, while the crusher pommel with an integrated fire starter adds extra functionality for survival scenarios. The design also features a lanyard hole and a bow drill system on both sides of the handle, making it ideal for survival use.

Supplied with a Kydex MOLLE-compatible sheath, the Halfbreed Blades HBBLBK01OD is perfect for tactical operators, military personnel, and outdoor enthusiasts looking for an indestructible and high-performance knife. Made in Australia, this tool embodies reliability and uncompromising toughness.

Technical Specifications
Intended Use: Tactical, Survival, Military
Production Type: Industrial
Country of Manufacture: Australia
Blade: Böhler K110 Steel
Blade Finish: PTFE (OD Green Teflon)
Handle: Black G10
Blade Length: 146 mm
Blade Thickness: 6.5 mm
Total Length: 286 mm
Weight: 541 g
Locking Mechanism: Full-Tang (Fixed Blade)
Clip: -
Packaging: Halfbreed Blades Box + Kydex MOLLE-compatible Sheath
Notes: Lanyard hole, Crusher pommel with fire starter, Bow drill on both sides of the handle

The USMC Fighter model is our modern and improved version of the classic multi-purpose knife made famous by the United States Marines.

This fixed blade is 6.5mm thick and made of CPM-S35VN sintered stainless steel with Black DLC treatment, measures nearly 30cm. in total length, has G-10 grips with a three-dimensional machined surface, a two-piece Titanium guard with DLC treatment, and a billet Titanium pommel with DLC treatment.

This unique full tang design has all the advantages of a classic slide-over construction without compromising strength, as would be expected from a Medford! With handcrafted brown leather sheath, it is a true 21st century combat knife.

Intended Use: Tactical/Collection

Type of manufacture: MidTech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN steel
Blade Finish: Black DLC
Handle: Titanium Guard and Pommel, and G10 three-dimensionally machined grips
Blade Length: 170mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: set back 1cm from the guard branch
Weight: 508g.
Sheath: leather, belt, for vertical carry, handcrafted
Packaging: nylon pouch, with zipper closure and Medford logos, certificates of warranty and authenticity, cardboard box
Notes: designed and built by Greg Medford

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife withdrawn from a private collection
* Condition: Excellent, with very minor marks on the blade
* Availability: Available
* Edge: Factory edge
* Blade Marks: Minor marks on the blade
* Handle Marks: None
* Box: Original
* Sheath: Perfect, never used
* Manuals, Certificates, and Warranties: Original warranty document
Inspected and Certified by our internal lab

The Moros is an excellent choice for field use or tactical applications. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without discomfort but sturdy enough to tackle various daily tasks. The tip profile is flat with a tapered upper edge, ensuring excellent cutting performance with good penetration strength. The full tang and handle of the Moros provide a neutral balance, making it light in hand. The ergonomic and textured Micarta canvas handle offers a comfortable and secure grip, both dry and wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing knives for friends in the special forces, and Mark, who worked with military and tactical equipment in the "Green Berets," decided to combine their skills and passion to create innovative and functional knives using the highest quality materials, entirely made in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Manufacture: USA
Blade: CPM-S45VN stainless steel 59/61 HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade Length: 134 mm
Blade Thickness: 4.8 mm
Overall Length: 254 mm
Balance: On guard
Weight: 203 g
Sheath: Kydex thermoformed
Packaging: Cardboard box with Spartan Blades logo
Note: Design by Curtis Iovito

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new, never used, never removed from its packaging, and never inserted in the sheath
* Availability: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present
* Sheath: Present, with an additional new leather sheath
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our internal laboratory

The Bark River Aurora II is designed as the ultimate bushcraft knife, a result of extensive testing conducted by experts in North America and Europe. This outdoor knife, perfected through feedback received, is notable for its balance and versatility. The blade, made of CPM 3V steel, is renowned for its exceptional strength and its ability to retain an excellent edge over time. However, it is important to watch for moisture and acids, as CPM 3V is not completely stainless. Cleaning the knife after use and occasionally applying oil is recommended to ensure its longevity.

The Aurora II, significantly larger than the standard model, features a pointed tip ideal for detailed tasks and a spine suited for use with a fire starter. These characteristics make it an indispensable tool for outdoor activities.

The handle is made of desert ironwood, a hardwood appreciated for its color and unique pattern, giving the knife a luxurious look and improving grip. Each piece is handmade by Bark River, meaning that every knife is unique and may have slight variations compared to the images.

Intended Use: Hiking / Utility / Bushcraft

Country of Manufacture: USA
Blade: Full tang in CPM-3V carbon steel at 61 HRC
Handle: Desert ironwood
Blade Length: 140mm.
Blade Thickness: 3.85mm.
Total Length: 264mm.
Weight: 195g.
Sheath: Leather, with an additional leather sheath
Notes: Knife from a private collection, like new, never removed from its packaging and never inserted in the sheath, provided with an additional sheath, out of production and no longer available on the market

30th Anniversary Limited Edition with logo engraved on blade

From 30 years of relentless dedication comes the MSI® 30th Anniversary edition. This knife showcases the best of homegrown excellence. Every detail, from materials to finish, has been carefully crafted to reflect our deep-rooted passion for precision and quality. Crafted with care and expertise, this blade is a testament to our heritage, where American craftsmanship meets unparalleled innovation

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: Injection molded polymer
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 128g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Limited edition commemorating Microtech's 30 years in business with 30th Anniversary logo engraved on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Present, leather.
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 25 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, leather cover, microfiber cloth, warranty certificates 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: -
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 21 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, microfiber cloth, warranty certificates

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, with some signs of wear and tear. 
* Commercially available: Still in catalog, with current delivery time of about 5 yearsfrom order
* Sharpening: Factory.
* Marks on blade: None, but small signs of anodization discoloration on opening pin
* Marks on handle: Small abrasion marks on clip.
* Box: Present and complete
* Scabbard: Originally not included, original, purchased separately, but with visible signs of wear.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of manufacture: Midtech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade treatment: stonewashed
Handle: titanium 6Al4V microbead blasted
Blade length: 92mm.
Blade thickness: 3.56mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 19mm.
Weight: 140g.
Closure: Frame Lock
Clip: titanium, removable
Package: cardboard box with Chris Reeve logos, Warranty certificates, Microfiber cloth, Maintenance kit, leather pouch, additional set of brass washers, keys for maintenance and disassembly.
Notes: -

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

Microtech Socom knives are named after the U.S. Special Operations Command, abbreviated as Socom; an operational command under the U.S. Department of Defense Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does! Thanks to high-quality materials that can withstand all the rigors of the battlefield. Knives built to last.

The Microtech Signature Series line is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of premium materials and finishes: such as carbon fiber, copper, Damascus, and DLC.

Intended Use: Tactical/Sporting

Type of production: Midtech
Country of Production: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black DLC
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: made of Kydex Carbon Fiber, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the United States Special Operations Command, abbreviated to Socom; an operational command under the United States Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre with DLC treated screws
Blade length: 137mm.
Blade thickness: 4mm.
Total length: 265mm.
Weight: 212g. (273g. including scabbard)
Sheath: Carbon fibre Kydex, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: G10 Urban Camo
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: Kydex Carbon Fibre, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances.  The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

First-rate materials, fine finishes and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances.  The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted
Blade length: 91.7mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 213.5mm.
Weight: 133g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -

In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird."  Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.  

Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.

Intended use: sports/hunting

Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warranties

Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.

WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collection

Type of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 2015 NOS new old stock - New from stock
* Condition: Like new, never taken out of original packaging.
* Commercially available: Hard to find
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory




Intended Use: Sporting / Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade finish: stonewashed
Handle: Titanium 6AI4V
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 17mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Packaging: white cardboard box with Chris Reeve logos, Warranty certificates
Notes: NOS knife, new from stock - Includes box and certificates

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Tumbled & Satin
Handle: Anodized titanium with flamed hardware
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 11mm.
Weight: 106g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade finish: Tumbled & Satin
Handle: handcrafted flamed titanium
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 201mm.
Thickness when closed: 11mm.
Weight: 115g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Theseus, named after the hero who defeated the Minotaur in ancient Greek mythology, is constructed in true Medford style. It features a tumbled D2 steel blade with stepped thumb groove and extended tang to facilitate quick one-handed use. A massive titanium handle with stainless steel spacer with lanyard hole and a unique pocket clip machined from billet complete the job.

Intended Use: Sporty

Type of production: Mid-Tech
Country of manufacture: USA
Blade: D2 steel
Blade finish: Tumbled & Satin
Handle: anodized titanium with flamed hardware
Blade length: 95mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 237g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting/Tactical

Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available -
* Sharpening: Factory
* Marks on blade: Slight, due to normal friction with the scabbard
* Marks on handle: No
* Box: Not present
* Scabbard: Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended Use: Tactical/Collection

Production Type: Semi Custom
Country of production: USA
Blade: D2 steel
Blade Treatment: Custom Flamed
Handle: G10 OD Green
Blade length: 128mm. (cutting edge 111mm.)
Blade thickness: 7mm.
Total length: 236mm.
Balance: slightly set back 2cm from the guard branch
Weight: 334g. (446g. with scabbard)
Sheath: kydex
Packaging: UNPACKED
Notes: -

The STA Sniper blade was designed for a USMC scout/sniper and STA training group instructor in Phoenix, Arizona. Medford wanted to offer something completely unique to the Sniper's craft and his particular needs.

A clever design that utilises the integration of innovative tools with classic knife elements for a perfect blend of form and function. The 1/2" spanner in the handle fits almost any scope mounting system ring, the hilt screwdriver adjusts to turret adjustments, the measuring marks on the back are extremely convenient for both scouting and sniping, and the LTRE (Look Through Range Estimator) can significantly improve sight distance estimation up to 400 metres. The blade is extremely robust for field work and the compact size allows easy placement in any kit/equipment.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory



The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.

Intended Use: Sporting/Collection

Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to 2015
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Guardian Tactical logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

100% USA Guardian Tactical, an American company specializing in the design and manufacture of tactical knives. Guardian Tactical combines obsessive and partly artisan attention with the use of modern and technologically advanced machinery in order to obtain almost perfect products with extremely high quality performance.

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama: USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark StoneWash
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory


Intended Use: Sporting / Collection 

Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collection

Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.

Intended Use: Tactical

Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like new