The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

The Fratelli Rizzi company was founded at the end of the 19th century in Premana, a small Italian mountain town located between Valtellina and Valsassina. Flexible and competitive company which, combining the typical characteristics of craftsmanship with the continuous search for new technologies, is synonymous with quality in the production of professional cutlery for cutting.

In 2012, after about 50 years of experience in the cutlery sector, the Fratelli Rizzi company decided to offer its own lines of professional cutlery under the name of MaglioNero, combining it with numerous collaborations with the best Italian and European operators in the field of professional cutlery.

Recommended use: cured meats, cheeses, small vegetables

Country of production: Premana, Italy
Cutting steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: mirror polished
Blade length: 140mm.
Construction: full tang with riveted handle
Handle: olive wood
Maintenance: manual washing only recommended

United Cutlery presents the Ranger Sword of Strider (in Italian Granpasso), a collectible reproduction of the sword featured in the Lord of the Rings films.

Strider (whom we will learn to know in the course of the events as Aragorn) is the son of Arathorn and heir to the Kingdom of Gondor. His ancestor, Isildur, was the king who cut the Ring of Power from Sauron's hand with the sword Narsil. 

Includes a parchment certificate of authenticity.

Total length: 120 cm
Blade length: 91.44 cm
Blade thickness: 0.64 cm
Blade material: 420 J2 stainless steel 
Handle: cast metal guard and pommel with antiqued finish and genuine leather-covered handle.
Display plate: wall-mounted, for vertical display, made of screen-printed wood

This sword is an official item manufactured by United Cutlery under official delal license from New Line Cinema!

Éomer was a captain of the king's cavalry, Marshal of the Brand and one of the most powerful warriors of Rohan. He skillfully wielded his royal sword, Gúthwinë especially against Orcs and Uruks of Isengard who dared to trespass on Rohan. He fought bravely alongside King Theoden against the forces of Mordor in the Battle of Helm's Deep and the Fields of Pelennor. In the final battle against the dark lord Sauron, Éomer fought alongside Aragorn with the armies of Rohan and Gondor at the Gates of Mordor.

This authentic and detailed replica is a reproduction of the real prop built by Weta Workshop and used in The Lord of the Rings films presented by New Line Cinema. This 34-inch long sword was made using only the finest materials and craftsmanship available. It features cast metal hilt parts with a brass finish, a genuine leather-covered handle, and a 27-inch stainless steel blade with engraved grooves.

Includes a parchment certificate of authenticity.

Total length: 86.36 cm
Blade length: 68.58 cm
Blade thickness: 0.64 cm
Blade material: 420 J2 stainless steel 
Handle: cast metal guard and pommel with antique brass finish with genuine leather covered handle.
Display plate: wall-mounted, for vertical display, made of screen-printed wood

This sword is an official item manufactured by United Cutlery under official delal license from New Line Cinema!

From the fragments of Narsil, kept in Rivendale, "Anduril" is reforged, the sword that will be delivered to Aragorn once he becomes King. The certificate of authenticity is included in the package. On the blade there are engravings in Elvish which translated mean "I am Anduril, who was Narsil, the sword of Elendil, let the slaves of Mordor flee from me!"

Includes a parchment certificate of authenticity.

Total length: 134.3 cm
Blade length: 103.19 cm
Blade thickness: 0.64 cm
Blade material: tempered. 420 J2 stainless steel engraved with runes.
Handle: Solid metal cross and knob with antique silver plated finish and 24 carat gold plated finishes. The pommel is engraved with runes and the handle is wrapped in genuine leather. Rat tail construction.
Plate: wood. screen printed with the symbols of the Kingdom of Gondor.

This sword is an official item manufactured by United Cutlery under license from New Line Cinema!

THE CAC® GIGN - Limited Edition 250 ex.

The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® scelto ufficialmente dell'Esercito Francese

Questo coltello è un vero concentrato di tutte le tecnologie avanzate che ci si aspetterebbe da un coltello operativo. La lama è in Nitrox®,  con manicatura in PA6

La versione del C.A.C attualmente in dotazione all'esercito, con logo ufficiale sulla lama e impugnatura in coyote non è disponibile per la vendita al civile.

Il CAC ® è il terzo coltello prdotto dalla Tarrerias - Bonjean progettato per l'esercito francese. Il suo design senza compromessi, leggerezza e robustezza fanno del CAC® un coltello eccezionale. Molto più tecnico e ambizioso dei suoi predecessori, il CAC® è la risposta di TB alla richiesta espressa dall'esercito francese, ovvero quella di progettare un coltello robusto e ambidestro con apertura e chiusura con una sola mano. Per creare questo eccezionale coltello, Tarrerias - Bonjean ha collaborato con Philippe Perotti, ex appartenente alle forze speciali francesi e autore di decine di libri sul tiro. La sua comprovata esperienza nel combattimento corpo a corpo ha massimizzato l'efficienza dell'uso del coltello per rendere il CAC® il compagno ideale per le truppe francesi in tutti i teatri operativi. Il meccanismo di bloccaggio del CAC® è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

TB ha anche integrato il meccanismo di bloccaggio sicuro della lama spostando l'asse sul CAC®. Questo meccanismo è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

Il CAC® è stato ufficialmente selezionato nel 2017 dall'esercito francese, rispetto all'offerta dei competitor, per le sue prestazioni, e rapporto qualità prezzo. La sua distribuzione nei vari corpi d'armata è iniziata all'inizio del 2018 e equipaggerà in gran parte i nostri francesi almeno fino al 2022.

Perfettamente resistente alla corrosione, la lama è realizzata in Nitrox®. Il CAC® ha anche un rompivetro, un taglia cinture e una clip da cintura reversibile.

Il manico è composto da due piastre in polimero caricato con fibre di vetro. Queste piastre sono avvitate al meccanismo tramite viti in acciaio inossidabile, una delle quali ospita abilmente una lama taglia reggetta. Questa lama curva e intercambiabile è progettata per tagliare cinghie, corde e cinture di sicurezza per facilitare l'estrazione in caso di incidente.

Destinazione d'uso: collezione

Lama: in acciaio inox Nitrox® 58/59 hrc
Manicatura: in G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 238mm.
Peso: 161g.
Fodero: -
Note: design Philippe Perotti 

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

Multi-purpose vegetable and fruit knife. Thanks to the wooden case (shirasaya), similar to the one used for the katana or the tanto, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: 420J2 steel
Japan blade production
Handle: cherry wood
Blade length: 105mm.
Blade thickness: 1mm.
Total length: 210mm.
Balancing: -
Weight: 36g.
Sheath: cherry wood sheath
Note:

special prototype made by Wander Tactical in October 2020

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: -
Handle: Green paracord
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 260mm.
Balancing: on the branch of gurdia
Weight: 201g.
Sheath: in kydex
Packaging: -
Notes: unique piece

Intended use: sportsman / gentleman

Type of production: industrial
Lama production: Italy
Blade: Nitro-B stainless steel
Blade treatment: -
Handle: in tulip, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio Silvestrelli

Intended use: Sports / Tactical

Type of production: Industrial
Blade: CTS-BD1 stainless steel
Blade treatment: micro-shot blasting
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 260mm.
Thick when closed: 18mm
Balancing: set back by 1cm from the guard branch
Weight: 270g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Pohl Force logos - numbered guarantee certificate - sticker with Pohl Force logos - PVC patch with velcro
Notes: Peg for opening with a single hand, which can be disassembled / assembled according to your preferences

La Valyrian Steel Collection è una serie di riproduzioni con licenze ufficiali, di armi presenti nell'universo fantasy creato dai libri best-seller di George R.R. Martin. Ogni singolo prodotto è realizzato con i migliori materiali disponibili e con particolare attenzione alle finiture ed ai dettagli.

Needle - La spada di Arya Stark

Lama: non affilata, in acciaio inox 420J2, lunga 57cm.
Guardia e Pomolo: Metallo color ottone antichizzato
Impugnatura: Pelle
Supporto Espositivo: da muro, in legno
Lunghezza Totale: 77.5cm.

Arya Stark
Arya Stark nacque nel duecentottantanovesimo anno dopo la conquista del Continente Occidentale da parte di Aegon Targaryen; è la seconda figlia femmina di Eddard Stark e Catelyn Tully.

È descritta come una bambina magra ed atletica. Ha ereditato la fisicità degli Stark, avendo un viso allungato, gli occhi grigi e i capelli castani. La sua personalità ricorda inoltre quella della defunta zia paterna, Lyanna.

Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.

Features:

coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel

History of the coin:

The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914

Fantasy series Swords of the Ancients Collection.

- 420J2 steel blade, black coated finish

- Total length cm 91

- Blade length 65 cm

- metal and plastic handle

Lo scudo High Elven Warrior UC1428 di United Cutlery  è un riflesso dell'artigianato artistico delle armi e delle armature elfiche nella Terra di Mezzo, come mostrato nelle scene di battaglia di apertura de La Compagnia dell'Anello.

Questo scudo minuziosamente dettagliato è realizzato in resina microfusa rinforzata con fibra di vetro, simile al puntello del film, e presenta un disegno di vite elfica sulla faccia anticata dello scudo. La maniglia è in alluminio e legno, con impugnatura rivestita in vera pelle.

Lo scudo include una staffa espositivo in metallo fuso, con cinturino in pelle intrecciata, che si attacca alla maniglia in modo che lo scudo possa essere esposto verticalmente su di una parete. Rigorosamente limitato a 5000 pezzi in tutto il mondo, è serializzato individualmente su una solida lastra di ottone montata sul retro.

Include un certificato di autenticità realizzato in carta pergamena ed un secondo certificato autografato personalmente dallo scenografo John Howe.

Altezza totale: 138.5cm - Larghezza totale: 53cm

Edizione limitata 5000 pezzi

- Elmo a grandezza naturale realizzato il metallo e cuoio con ottime finiture e dettagli.

- Supporto in legno d'appoggio e certificato d'autenticità inclusi

Under the command of Gandalf the WhiteTM the men of Gondor defended Minas Tirith, the Kingdom of Gondor, from within the city walls against the siege of Sauron. Greatly outnumbered by Sauron´s armies, the Gondorian infantry did not stand a chance in open war. Miraculously, with the use of their trebuchets and archers, the Gondorian army held their own until the nine Nazgûl, upon their fell beasts, swooped in destroying the trebuchets and forcing men to flee their posts. This distraction allowed the trolls to push their siege towers in, unleashing scores of orcs onto the walls of the city, and allowing the release of Mordor´s greatest weapon - Grond, a 150 foot iron battering ram shaped like a wolf. The gates of the city would not hold, driving the Gondorians back into the third level of the city. 

With much of the lower levels of Gondor in flames, it seemed as if it was on the verge of a catastrophic defeat, until suddenly the Riders of the Rohirrim appeared on the horizon, closing in and driving the armies of Mordor away from the city, thus ending the siege upon Gondor and entering into the Battle of the Pelennor fields. Although the Gondorians were technologically advanced compared to most races of Middle-earth, the design of the helm carries details reminiscent of Numenor. The barbut style helm - one piece, shoulder-length, and open-faced - finished off the suit of steel plate armor that a Gondorian infantryman wore. The smooth finish and flared bottom of the helm offered better neck protection, allowing blows to be deflected away from the body. Adorned on the sides of the helm are seabird wings, a familiar Gondorian motif. 

This authentically detailed helmet is a reproduction of the helmet prominently featured in The Lord of the Rings,TM The Return of the King presented by New Line Cinema. United® Cutlery Brands, industry leader in fine movie reproductions, has meticulously recreated the actual prop helmet using the finest grade materials and craftsmanship of the highest quality available. This intricately detailed actor´s scale helmet is wearable, and is completely handcrafted in solid iron with embossed decoration and a hand-antiqued finish. It features a genuine leather-lined interior with an individually serialized solid brass plate mounted on the inside back of the helmet to ensure authenticity. This adult collectible is strictly limited to 2000 pieces worldwide and each helmet is presented with a wood display stand adorned with "The One Ring" inscription and a brass medallion. 

LIMITED EDITION GONDOR INFANTRY HELM


HELM MATERIAL: Solid iron with embossed decoration and an antiqued finish, genuine leather-lined interior.
DISPLAY: 24.13 cm x 24.77 cm x 17.46 cm wood, burned-edge finish, gold silk screen, brass medallion. Hardware instructions included.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel Caston

Viper's Sakura Knives, designed by Jens Anso and Jesper Voxnaes, are a modern interpretation of the classic kitchen knife.

Featuring a hardening with a subsequent cryogenic finish to provide the best cutting and sealing properties, they have gorgeous Bocote Hot Wood Handles that adds character and sophistication to design.

Recommended uses: Vegetables, raw meat, fish
Country of Origin: Italy - Maniago (PN)
Blade material: Nitro-B 58 / 59HRC stainless steel
Handle material: Bocote stabilized wood
Blade Length: 18cm
Blade thickness: 3mm
Design by Jens Anso & Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

Intended use: Tactical / Martial

Type of production: Industrial
Production Country: Taiwan
Blade: Full tang, stainless steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Overall length: 197mm.
Weight: 102g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Packaging: cardboard box with Spyderco logos
Notes: Design by Craig Douglas, aka "Southnarc"

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended Use: Hunting / Utility

Type of production: Industrial
Production Country: Italy
Blade: Full Tang, stainless steel 1.4916 Buderus Nitro-B
Handle material: wood Bocote
Blade length: 105mm.
Blade thickness: 5mm.
Overall length: 225mm.
Balancing: back to 1cm
Weight: 176g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: -

United to the happiness of many fans, has re-proposed reproductions of the beautiful elven daggers of Legolas. Sold in pairs with the wooden display stand, the dagger blades measure 40 cm and have a maximum thickness of 5 mm;

total length 57 cm.

Weight each 438 g.

United - Hobbit Sword of Thranduil UC3042 - The Hobbit

Father to Legolas Greenleaf, Thranduil is a powerful Elf-Lord and a legendary fighter. King of the Woodland Realm, he rules over the northern lands of the great forest known as Mirkwood.

The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel.

This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.

The Design of the Sword of Thranduil:

This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil. Includes a certificate of authenticity.

UC3042 Sword of Thranduil
Includes a parchment certificate of authenticity.
Overall Length: 41-7/8"
Blade Length: 30-3/4"
Highly Detailed Stainless Steel Blade
Authentically Detailed Metal Hilt and Parts
Presented with Wood Wall Mount Display

Tauriel is a Silvan Elf and daughter of Mirkwood. Her parents were killed by orcs when she was younger and it is hinted that Thranduil looked after her since then. She is a very young elf, around the age of 600, and is insightful into the changing nature of Middle Earth, recognizing the growing evils of the world and the need to eradicate them rather than withdraw into the safety of the elven fortress.

A favorite of King Thranduil and Captain of his Woodland Elven Guard, Tauriel is highly effective and lethal in combat, and primarily employs a reflex bow and two daggers in battle. She is also shown to possess medical knowledge, being able to treat wounds from poisoned weapons. As a native of the woodland realm, she is also a capable tree-climber and an adept leader.

This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.

The Design of the Fighting Knives of Tauriel:

As Captain of the Woodland Guard, Tauriel carries signature twin daggers with blades forged of a bronzed alloy and a Silvan steel edge of superior strength. The hilts are crafted from greenwood with bronzed steel fittings. This replica is crafted of stainless steel with cast metal and polycarbonate handles, precisely detailed and colored to exactly match the movie prop. It is presented with a wood wall mount featuring graphic motif of Tauriel. Includes a certificate of authenticity.

UC3044 Fighting Knives of Tauriel
Includes a parchment certificate of authenticity.
Overall Length: 20-1/2"
Blade Length: 13-7/16"
Stainless Steel Blades with Cast Metal & Polycarbonate Handles
Wall Mount Display with Graphic Motif of Tauriel

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: Teflon coating
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: Inside the package is a pin / thumbstood to mount on the back of the blade to make the knife can be opened with one hand.

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson Flipper