coltelli campeggio sportivi, coltello uso outdoor
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Roselli - Carpenter knife full tang - R110F - artisan knife
Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.
The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -RO-R110F -
Opinel - Set Barbecue - Coltello N°12 B, Spatola e Pinza XL - coltelli da cucina
The Barbecue Set is the timeless companion of convivial and gluttonous moments.
Useful and effective, it consists of three utensils manufactured in France from quality local materials:
- The N°12 B folding knife: a new size of knife with a 16 cm stainless steel blade and a sturdy beech wood handle from French forests. It has a safety ring that allows the blade to be locked in the open or closed position. It also has a bottle opener at the end of the handle that allows you to open bottles but also hang the knife.
- The Spatula +: The stainless steel spatula with stonewashed finish fits on the handle of the No. 12 B knife and locks with the ferrule. Its large surface area (8.5 cm x 20 cm) allows you to scoop food quickly. It has a narrow angle and bevel on both sides for separating or scraping.
The XL Tong: The stainless steel tongs with stonewashed finish is 40 cm long for easy and safe handling. The asymmetrical head allows you to pick up large pieces with the wide serrated angle and smaller ones with the narrow angle. It also has a grate lifter slot on the heel.
Technical data sheet Knife
Steel: stainless, martensitic 55/57HRC
Handle: beech wood
Blade length: 16cm
Security system: Virobloc ringop-setbbq -
Benchmade - Station Kitchen Knife - CPM-154CM & Tan Richlite - 4010-02 - field kitchen tool
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade Finish: Stonewashed
Handle: Tan Richlite and Black G10
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010-02 -
Benchmade - Skirmish 630 Titanium - NOS FULL SET from a PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) conditionBM-630-CP -
Spyderco - Smock - New Pivot 2024 - S30V & Carbon Fiber/G10 - C240CFP - knife
Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.
The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.
Intended Use: Sporting/EDC
Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivotC240CFP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Benchmade - 755 MPR Mini Pocket Rocket by Shane Sibert - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane SibertBM755-CP -
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Fox - Oxylos - Satin Becut & Olive Wood - FX-616OL - hunting and bushcraft knife
Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary pugnacity and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a sought-after satin finish for an elegant finish, the OXYLOS is ready to take on any challenge.
The olive wood handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.
Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.
Intended Use: Hunting / Hiking / Bushcraft / UtilityType of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Satin finish
Handle: Olive wood
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 270g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -FX-616OL -
Benchmade - Meatcrafter 4" - Dark Olive Santoprene Hybrid Hunting Knife - 15505 - knife
From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.
The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.
With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.
Intended Use: Hunting / Meat KnifeType of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modeloBM-15505 -
Benchmade - Sibert Mini Bushcrafter - CPM-S30V & OD Green G10 - 165-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 165-1 Mini Bushcrafter is a compact take on the classic outdoor bushcrafting knife, the most important tool in your kit.
With an 8.5cm. fixed blade made of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 165-1 Mini Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 85mm.
Blade thickness: 4.2mm.
Total length: 192mm.
Weight: 183g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-165-1 -
Benchmade - Sibert Bushcrafter - CPM-S30V & OD Green G10 - 163-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 163-1 Bushcrafter is a reimagining of the classic outdoor bushcrafting knife, the most important tool in your kit.
With a fixed 11-cm. blade of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 163-1 Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-163-1 -
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Maserin - Mini Gourmet by Attilio Morotti - Ebony - 381/EB - knife
Intended use: sports/steak
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-381/EB -
Maserin - Hunting knife with olive handle and skinner - 763/OL - knife
Intended use: Sports/Hunting
Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.MA-763OL -
Lionsteel - Skinny Titanium - Blue & Stonewashed MagnaCut - SK01 BL - knife
Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.
It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife.
The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip.
Intended Use: Sporting / EDC
Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movementLS-SK01BL -
Lionsteel - Skinny Titanium - Grey & Stonewashed MagnaCut - SK01 GY - knife
Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.
It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife.
The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip.
Intended Use: Sporting / EDC
Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movementLS-SK01GY -
Lionsteel - Skinny Aluminium - Red & Stonewashed MagnaCut - SK01A RS - knife
Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.
It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife.
The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip.
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movementLS-SK01ARS -
Lionsteel - Skinny Aluminium - Black & Stonewashed MagnaCut - SK01 A BS - knife
Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.
It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife.
The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip.
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movementLS-SK01ABS -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Intended Use: Hunting / OutdoorProduction Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collectionL446228-CP -
Boker Plus - M.E.R.K. 1 by Vaeringi Design - D2 & Black G10 - 01BO552 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening systemBO-01BO552 -
Boker Plus - Elso Folder by Kornel Kiss - D2 & Black G10 - 01BO554 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Kornel Kiss - ball bearing opening systemBO-01BO554 -
Boker Plus - Undertow by Lorien Arnold - D2 & Black G10 - 01BO694 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Lorien Arnold - flipper opening system on ball bearingsBO-01BO694 -
Boker - TRPPR Trapper - MagnaCut & Curly Birch - 112098 - Pocket Knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112098 -
Boker - TRPPR Trapper - MagnaCut & Green Micarta - 112943 - Pocket Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112943 -
Boker Plus - Collection 2024 by Les George - MagnaCut & Fat Carbon - 01BO2024 - pocket knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening systemBO-01BO2024 -
Boker Magnum - Skruva knife - 01SC011 - knife
Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.
An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.
The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.
The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.
Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -BO-01SC011 -
Boker Magnum - Skeksis knife - 01SC008 - knife
Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.
The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.
Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -BO-01SC008 -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Victorinox - Evoke Alox - Terra Marrone - Limited Edition 2024 - 0.9415.L24 - knife
With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: SportyType of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024V-0.9415.L24 -
Andrew Demko - Custom AD20 Full Size - CPM CruWear & Carbon FIber - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Utility / CollectionProduction type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially availableAD20-FSC-CP -
Viper - Belone by Vox - Satin M390 & Blue Dark Matter Carbon Fiber - V5970TIFCB - knife
In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFCB -
Viper - Vale by Vox - Satin MagnaCut & Titanium Bronze - V6004TIBR - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBR -
Viper - Vale by Vox - Satin MagnaCut & Titanium Blue - V6004TIBL - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBL -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
Benchmade - Bugout 535-12 - Tan Grivory - Axis Lock Knife - knife
In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.
The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.
Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-535-12 -
Boker Plus - Swoopy Framelock Folder - Nitro-V & Sand G10 - 01BO693 - knife
The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.
The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.
Intended Use: EDC / Sporting
Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael BurchBO-01BO693 -
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
MoraKniv - Basic 546 Limited Edition 2024 - Dala Red & Ivy Green - 14282 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414282 -
MoraKniv - Basic 511 Limited Edition 2024 - Ivy Green & Dala Red - 14281 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414281 -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Benchmade - Meatcrafter - Dark Olive Santoprene - 15500-04 - knife
When your field adventures transition to the kitchen, the right cutting tool can make all the difference!
The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!
Intended Use: Hunting / Meat Knife
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500-04 -
Viper - Moon by F. Silvestrelli - Green Dark Matter Carbon Fiber & CPM MagnaCut - V6008FCV - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6008FCV -
Viper - Moon by F. Silvestrelli - Natural Micarta & CPM MagnaCut - V6010CN - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010CN -
Viper - Moon by F. Silvestrelli - UltreX SureTouch & CPM MagnaCut - V6010GG - knife
Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."
The handle uses the brand new UltreX SureTouch composite in modified G-10.
SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material.
The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010GG -
ExtremaRatio - Ant Black Stone Washed Knife - M390 - Folding Knife
The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.
The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.
The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.
The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.
For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.
The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.
Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:ER-ANT-B-M -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO680SOI -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO678SOI -
Opinel - N°08 - Perrine Honore - Limited Edition Nature 2023 - Knife
After the France, Amour and Escapade editions, discover the Nature edition!
An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.
Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way.
The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.
Intended Use: CollectionType of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logosop-8-002602 -
Opinel - N°08 - Rommy Gonzalez - Limited Edition Nature 2023 - Knife
After the France, Amour and Escapade editions, discover the Nature edition!
An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.
Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.
Intended Use: CollectionType of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logosop-8-002601 -
Boker - Mini Bronco 80CrV2 Bushcraft Knife - 121505 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -BO-121505 -
Boker Plus - Kihon DC GFN Knife - 01BO800 - Lucas Burnley - Folding Knife
The American custom knife maker Lucas Burnley embodies the concept of Japanese Kihon with the design of the Boker Plus Kihon DC. The term originally encompasses the fundamental principles and basic techniques of Japanese martial arts, which Burnley translates into practicality in the solid everyday pocket knife.
The features and linear design are evidence of a high level of practicality, providing the knife with a decisive price-performance advantage and an ideal basis for daily cutting tasks. The satin-finished drop-point blade made of D2 opens smoothly via the removable thumb stud thanks to the ball bearing, while the slide lock of the crossbar ensures intuitive, safe, and practical unlocking of the knife.
The non-slip handle with textured squares is made of high-strength GFN and fits comfortably in the hand. Orange anodized rings around the blade axle screw and the large handle screw give the Kihon a refined touch. Supplied with a lanyard hole and a convertible tip-up wire clip for flexible carrying options.
Intended use: EDC / Sporting
Production type: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 82mm.
Blade thickness: 3.2mm.
Overall length: 200mm.
Weight: 105g.
Clip: Steel, removable and reversible
Locking mechanism: Axis lock
Packaging: Cardboard box with Boker Plus logos
Notes:BO-01BO800 -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Maserin - Silver by Graciut - Elmax & Gold Fat Carbon - 410/G - knife
Intended use: Sporting
Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"MA-410/G -
Maserin - Daga by Attilio Morotti - Elmax & Blue Fat Carbon - 372/B - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/B -
Maserin - Daga by Attilio Morotti - Rose Damascus & Gold Fat Carbon - 372/DG - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade treatment:
Handle: In titanium and Fat Carbon with gold highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/DG -
Maserin - Tungsteno by Atti - Tungsten Carbide & Green Fat Carbon - 373/WTG - knife
Winner of the "Most Innovative Imported Design" at the Blade Show in 2023, this knife is designed by Attilio Morotti made in collaboration with Sandrin knives that supplies the tungsten carbide blades that, made through a sophisticated machining process, reach the extraordinary hardness of 71 HRC, yet at the same time maintaining a high twisting capacity and resilience.
Intended Use: Sporting / Collection
Country of manufacture: Italy
Total length: 150mm
Blade length: 80mm
Blade thickness: 1.5 mm
Blade material: polyhedral tungsten carbide 71 HRC hardness
Handle material: forged Fat Carbon fiber
Weight: 78 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti - Blades by Sandrin Knives - Winner at the Blade Show 2023 of "Most Innovative Imported Design"MA-373/WTG -
Maserin - Gourmet by Attilio Morotti - Rose Damascus & Green Fat Carbon - 380/DV - knife
Intended use: sporting/for table use
Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade finish: -
Handle: fat carbon with green highlights
Blade length: 97mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 217mm.
Thickness when closed: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio "Atti" MorottiMA-380/DV -
Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FC3D -
Benchmade - Freek - Satin S90V & Carbon Fiber - 560-03 - knife
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S90V (59-61 HRC)
Blade treatment: Satin finish
Handle: Carbon fiber with anodized aluminum spacers
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 215mm.
Weight: 116g.
Closure: Axis
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Benchmade logosBM-560-03 -
Maserin - Mini Trapper - Elmax & Deer Horn - 924/CV-1 - knife
Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.
Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.
Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.
Intended Use: Hunting / Hiking
Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -MA-924/CV-1 -
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
Boker Plus - Knife Kit by Raphael Durand - Advent Calendar 2023 - 01BO902 - knife
Christmas is the time of year when traditions and special moments are celebrated with enthusiasm. One of these traditions is the advent calendar, and Boker has decided to revisit it in a unique way.
The complete kit for a high-quality pocket knife
Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Every day a piece of the knife, which will allow you, in the end, to build your custom knife. The kit includes elements such as the blade, various handles for customizing the handle, precision screws, useful accessories, and some surprises that will make every day a unique emotion.
Intended use: EDC/Gentleman
Type of production: Industrial
Country of production: East
Blade: in D2 steel
Blade treatment: satin
Handle: micarta and carbon fiber
Blade length: 80mm.
Blade thickness: 3.0mm.
Total length: 185mm.
Weight: 71g.
Closure: back lock
Packaging: Cardboard box with Boker logos
Notes: Design by Raphaël DurandBO-01BO902