Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

The Boker BRLW MokuTi is an exclusive edition produced in a limited run of just 200 pieces worldwide, a model that perfectly combines tradition, contemporary design, and materials of the highest quality. Designed for discerning collectors and enthusiasts, this folding knife represents a refined synthesis of sophisticated aesthetics and high performance.

The Drop Point blade is crafted from MagnaCut steel and hardened to 62 HRC ±1, ensuring an exceptional combination of hardness, edge retention, and corrosion resistance. The subtle false edge enhances its dynamic profile, while the quick-opening Flipper mechanism and the secure Liner Lock system ensure practicality and reliability in daily use.

The distinctive feature of the BRLW Mokuti is undoubtedly the exclusive Mokuti handle, characterized by striking iridescent hues in shades of blue and purple. The gold-colored details, such as the pivot screw and the handle screws, create a refined aesthetic contrast, further enhanced by the Mokuti pocket clip with a Tip-Up configuration for right-side carry.

Rounding out the package is a practical lanyard hole, offering additional carrying options, and an elegant display case included, which underscores its exclusive and collectible character. The Boker BRLW Mokuti is a true work of contemporary craftsmanship, destined to stand out in any collection.

Intended Use: Collectible

Production Type: Industrial
Country of Manufacture: Germany
Blade: CPM-MagnaCut steel, 62 HRC
Blade Finish: Satin
Handle: MokuTi 
Blade Length: 65 mm.
Blade Thickness: 2.5 mm.
Total length: 154mm.
Weight: 75g.
Clip: MokuTi, machined from solid
Lock: Frame Lock
Packaging: display box with transparent plastic suspension film
Notes: Carson Flipper opening system on ball bearings - Limited edition of only 200 numbered pieces

Opinel x monbento Origines Lunch Kit

The Origines lunch kit is the result of a collaboration between monbento and Opinel, designed to make eating on the go simpler, more practical, and more sustainable.

This limited edition combines the expertise of two historic French brands in an elegant and functional set, designed to accompany you every day at the office, while traveling, during a picnic, or on outdoor adventures.

Premium materials—stainless steel and beech wood—come together in a contemporary design inspired by a return to the essentials and the conviviality of the nomadic meal.

What’s included in the Origines kit
1L Sense L Lunch Box

The Sense L Lunch Box is a lightweight, sturdy, and durable metal lunch container, designed to last and simplify meals on the go.

Features:

1-liter capacity
Durable and lightweight metal construction
Oven, microwave, and stovetop safe (without lid)
Comes with a beechwood cutting board
Reusable and ideal for daily use
Elegant and practical design

Thanks to its versatile design, the Sense L becomes an indispensable accessory for those seeking a sustainable alternative to disposable containers.

Opinel néo6 Pocket Knife

The néo6 is a compact and easy-to-handle pocket knife that reinterprets the iconic Opinel style with a contemporary twist.

Features:

7 cm stainless steel blade with a rounded tip
OPIFLEX® system that keeps the blade open or closed without locking it
Varnished beechwood handle
Leather lanyard
Compact, practical, and designed for everyday use

Perfect for picnics, lunch breaks, and outdoor activities, offering both practicality and safety.

“Origines” Design

The packaging and the knife are decorated with the “Origines” motif, inspired by cave drawings and symbols of nature.

These motifs evoke a return to the essentials: eating on the go with practical, elegant items built to last.

Technical Specifications
Product Name: Opinel x monbento Origines Meal Kit
Lunch Box Capacity: 1 L
Materials: stainless steel and beech wood
Limited Edition: 3,500 pieces
Usage: office, travel, outdoor, picnic

The No. 08 Champignon model is available in a black walnut version for an elegant and refined mushroom-picking experience.

This classic Opinel features a comfortable black walnut handle, accented with an orange Alcantara cord. It features an 8 cm curved stainless steel blade to facilitate harvesting, with a scraper on the back for cleaning mushrooms.

The natural bristle brush integrated at the end of the handle allows for easy dusting: the ideal tool for efficient and thorough harvesting.

This pocket knife comes in an elegant wooden case with a plexiglass window. 

Intended Use: Mushroom Picking

Production Type: Industrial
Country of Origin: France
Blade: Sandvik 12C27 Stainless Steel
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Blade Thickness: 2mm
Closed Length: 125mm
Total length: 200mm
Weight: 95g
Closure: Virobloc safety ring
Packaging: Wooden box with synthetic glass
Notes: Supplied with a high-visibility Alcantara lanyard - Fixed rear brush, made of natural bristles

The Boker M4 Sherman-Damast Rose Gold is not simply a knife, but a true tribute to one of the most iconic military vehicles in history: the M4 Sherman tank. 

Crafted in collaboration with Americans at the Wartime Museum in Virginia, the knife integrates a truly unique element: the 80-layer Damascus steel blade is hand-forged by renowned bladesmith Chad Nichols using materials from restored M4 Sherman tanks. The Customized Ladder motif visually recalls the traces left by the tank's tracks on the ground, symbolizing the profound mark left by the Sherman in history.

This special edition is embellished with an elegant rose gold coating on the blade, clips and screws. The folding knife opens with one hand thanks to the pinball or thumb stud and is securely locked by the sturdy Frame Lock, while the Hinderer Lock-Stop system protects the mechanism from overextension, ensuring greater durability.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: Chad Nichols handcrafted 80-ply stainless damask steel from M4 Sherman parts
Handle: Stonewashed titanium and forged carbon fiber with anodized titanium viteria and damask spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 178mm.
Weight: 95g.
Clip: in titanium, obtained from solid
Closure: Frame Lock
Packaging: PVC display box that lets the knife "float" inside, making it visible from all sides
Notes: Limited Edition, Numbered, Made of Only 500 Pieces - Numbered Warranty Certificate - Gray Cotton Case

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Difficult to find
* Sharpness: Factory sharp
* Marks on blade: Minimal marks from opening and closing the blade
* Marks on handle: None
* Box: Present
* Sheath: Nylon pouch with zip
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

A new interpretation of the classic gentleman's folder: a titanium slip joint knife that combines utility, elegance, and the highest quality construction.

The pocket knife designed for those seeking discretion and refinement, ideal for those who do not want to carry a full-size EDC blade or find themselves in situations where the use of a traditional knife is not permitted.

Intended use: EDC / Sports 

Production type: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade finish: Tumbled and Satin
Handle: Tumbled Titanium
Blade length: 79mm.
Blade thickness: 3.1mm.
Closed length: 102mm.
Total length: 178mm.
Closed thickness: 9.8mm.
Weight: 82.2g.
Closing system: Slip Joint
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zip pouch, warranty and authenticity certificate, stickers, and morale patch
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Difficult to find - Limited edition of only 250 pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The Spearpoint Vega combines precision engineering and premium materials in a superior folding knife. The lightweight and durable frame is made of finely sandblasted and polished aerospace titanium, embellished with carbon fiber inserts. The blade, made of “Wave” Damascus steel with a high-strength VG-10 cutting edge, offers versatile cutting.

The push-button locking system and stainless steel thumb stud allow for smooth one-handed opening. Every detail expresses William Henry's philosophy: combining superlative function and refined artistry. The Vega model uses hand-forged metals and exotic materials, symbolic of the William Henry collection, for an object that becomes a statement of style, designed to accompany you throughout your life.

Intended use: Collection

Type of production: MidTech
Country of production: USA
Blade: 45-layer laminated stainless steel Damascus with wave pattern and VG-10 cutting edge
Handle: Titanium with carbon fiber inserts
Blade length: 77.8mm.
Blade thickness: 2.3 mm.
Closed length: 104 mm.
Total length: 182 mm.
Weight: 59 g.
Closure: Button lock
Clip: Titanium, removable and reversible
Packaging: Wooden box with William Henry logos, cardboard outer box, certificate of authenticity
Notes: Limited edition of only 250 pieces - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from 2019, previously purchased and originating from a private collection
* Condition: Overall in excellent condition
* Available on the market: Single item
* Sharpness: Factory sharp
* Marks on blade: No
* Marks on handle: a few small, imperceptible scratches (it deliberately features a special acid-etched and faded finish that shows lighter and darker areas, with acid rain stains in dark gray, violet, and green
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Certificate of authenticity with date, serial number, and craftsman's stamp
* Checked and certified by our in-house laboratory

Intended use: collection / sports

Type of production: Handcrafted
Country of production: USA
Blade: M390 stainless steel with Acid Stonewashed treatment
Handle: Ghost Faded Acid Rain Dark Blast titanium with green anodized internal parts and screws
Blade length: 65mm.
Blade thickness: 3.5 mm.
Closed length: 88 mm.
Total length: 152 mm.
Closed thickness: 10.5 mm.
Weight: 76 g.
Opening: front flipper system with ball bearings
Closure: FrameLock
Clip: Titanium
Packaging: Hard fabric case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: Each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors, and details - each knife is numbered

Cosmic, straight from space: the new EDC has arrived!
The Boker BRLW Meteorite Damascus is anything but terrestrial. Lightweight design, pulsating dynamics, boundless appeal: this exclusive special version redefines the laws of the EDC universe while staying true to traditional values - in a word: BRLW.

Indifferent to the 150 years of history behind it, this sleek pocket knife takes the iconic Boker Barlow into the future with contemporary spirit and premium materials. The clip-point blade on ball bearings is hand-forged by Chad Nichols from authentic meteorite damascus, a combination of meteoritic iron and carbon steel, featuring the extraordinary “Mosaic Crossed Damascus” pattern.

The precision-milled titanium handle harmoniously complements the design: at the front it recalls the elongated bolster of classic Barlows, while at the back the irregular texture evokes the surface of a meteorite, while offering a pleasant, secure grip. The integrated framelock with hardened steel insert ensures a reliable lock. The discreet concealed flipper, flat titanium clip (tip-up, right side), backstrap, and pivot screw embellished with the Boker tree symbol complete the package.

The Boker BRLW Meteorite Damascus comes in an elegant collector's box, with certificate of authenticity. A one-of-a-kind collector's knife - refined, extraterrestrial, made in the Boker Manufacture in Solingen.

Intended Use: Collectible

Type of manufacture: Industrial
Country of manufacture: Germany
Blade: handcrafted “Mosaic Crossed Damascus” steel by Chad Nichols, composed of meteoritic iron and carbon steel
Blade treatment: -
Handle: milled titanium
Blade length: 65mm.
Blade thickness: 2.5mm.
Total length: 154mm.
Weight: 75g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: display box with hanging clear plastic film
Notes: Carson Flipper type opening system on ball bearings

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Uncompromising elegance
With its ebony handle, full-bodied and velvety to the touch, néo6 stands out for its refinement and comfort. A prestigious and functional pocket knife with an essential design and attention to detail.

The 7 cm stainless steel blade, with rounded tip, offers precision and safety in daily use. The discreet and practical natural leather strap completes it with a touch of elegance.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: African Ebony Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Mediterranean style, authentic soul
The Italian olive wood handle gives néo6 a warm and sunny character. Each pocketknife is a unique piece, thanks to the natural wood grain that enhances its authenticity. The 7-cm stainless steel blade with rounded tip provides safety and versatility in daily activities.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Italian Olive Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Fine materials, essential functionality
The elegant and timeless French black walnut handle gives néo6 a pleasant and natural grip. The ergonomic shape ensures comfort and control, while the leather strap adds a refined and practical detail for easy attachment.

Intended Use: EDC / Sporty

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

“Mon Premier Opinel” children's pocket knife and related case.

The “Mon premier Opinel” knife and its case for picnics, first outdoor adventures and DIY. It is an absolutely suitable gift idea for children for experimentation, nature discovery and empowerment.

8 cm blade with rounded stainless steel tip, wooden handle from eco-friendly forests, swivel safety ring to lock blade in open and closed position.

Environmentally friendly belt pouch made from shredded plastic bottles (100% recycled PET) and reclaimed leather from offcuts of leather workshops and factories.

The Virobloc safety system, invented by Marcel Opinel in 1955, allows the blade to be locked in both the open and closed position, ensuring safe use in any situation.

This knife, made entirely in France, is the perfect choice for lovers of nature and objects of distinctive design.

Intended use: outdoor, hiking

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade finish: Satin
Handle: Beech wood
Blade length: 80 mm
Length closed: 100 mm
Total length: 180 mm
Weight: 40 g
Closure: Virobloc security system
Sheath: Belt sheath, made of recycled plastic and reclaimed leather
Packaging: Cardboard box with Opinel logos

As the Arctic sun descends over the horizon, an enchanting purple haze spreads across the sky, creating a fleeting spectacle that inspired the creation of the Gold Class 585BK-251 Mini Barrage, an exclusive masterpiece for discerning EDC knife collectors.

This extraordinary piece combines cutting-edge functionality and unparalleled design. The handle is made with the elegant Fatcarbon in Purple Haze coloring, combined with Abyss PVD coated components for a unique and durable finish. The CPM-S90V steel blade, finished with an exclusive black DLC Battlewash finish, offers a sharp and versatile drop point design, ensuring exceptional performance and unmistakable style. Thanks to Benchmade's AXIS assist technology, the knife opens quickly and accurately, ensuring reliability in any situation.

As rare and fascinating a piece of work as the natural phenomenon that inspired it, the Gold Class 585BK-251 Mini Barrage is limited to only 3,500 units worldwide and is available exclusively for 2025. Don't miss your chance to own a jewel of Arctic brilliance!

Intended Use: Sporting/Collection

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V 59/61HRC
Blade Finish: DLC Battlewash
Handle: FatCarbon Purple Haze with folders and screws with Abyss PVD finish
Blade Length: 73.9mm.
Blade thickness: 2.54mm.
Length closed: 101mm.
Total length: 175mm.
Weight: 109g.
Closure: AXIS Lock Assist, with dorsal safety lock on both opening and closing
Clip: Removable and reversible, stainless steel with Abyss PVD finish
Packaging: Cardboard box with Benchmade logos, certificates of warranty and authenticity
Notes: design by Warren Osborne - Limited and Numbered Edition on Blade, Box and Certificates produced in only 3500 pieces

The Fox Vintage Horn Multitool is not just a knife, but a true adventure companion. This multitool pocket knife, made of pressed horn, offers no less than 9 essential functions for those who love the outdoors or need a reliable tool in any situation.

Pressed horn is a composite material obtained by fragmenting and then compacting natural horn using heat and controlled pressure. During the process, the keratin particles are softened and partially fused, allowing the formation of homogeneous and stable blocks or sheets.

Features:

Large blade: Sharp and durable, ideal for precise cutting and slicing.
Small blade: Perfect for detailed work and finer cuts.
Corkscrew: For opening wine bottles easily and effortlessly.
Can opener: Essential for opening preserves and cans when camping or traveling.
Cap lifter with screwdriver: Combines the functionality of opening bottles with a handy screwdriver.
Awl - Reamer: Ideal for piercing materials or enlarging existing holes.
Key ring: To keep the multitool handy attached to your keys or backpack.

Type of production: Industrial
Country of production: Italy
Blade: 420HC stainless steel
Handle: brass and pressed horn
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 12mm.
Weight: 85g.
Sheath: -
Packaging: no packaging
Notes: vintage product, manufactured in the 1980s

Intended Use: Sporting / Collection

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel M398 60/62HRC
Blade treatment: PVD Stonewashed
Handle: carbon fiber and bronze anodized titanium hardware
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 97g.
Closure: Liner Lock
Clip: stainless steel
Sheath: Leather sheath
Packaging: Cardboard box with Fox Knives logos 
Notes: Opening via Carson Flipper system - Ball bearing movement - Design by Jesper Voxnaes

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Iconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM). 

Intended Use: Collection / Vintage / Tactical

Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand new

The Jupiter folder represents the culmination of the evolution of the locking system already used on the well-known Radius and Saturn, compared to which it gains a new safety lock that allows the blade to inhibit rotation in both the open and closed positions.

The design takes up the salient features of the two previous models, managing to integrate even better the round element that houses the mechanics. The blade, devoted to maximum practicality, makes the Jupiter the ideal companion in both urban and woodland environments: the tip is sturdy, while the cutting edge has a smooth, steady curvature that is fully usable and easily resharpened.

The handle shines in ergonomics, featuring a wide recess for the index finger and generous space for the other fingers.

Intended Use: Sporting/Collection

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel M390 59/61 HRC
Blade treatment: Acid Stonewash
Handle: sandblasted titanium with "Jungle Wear" green carbon fiber inserts
Blade length: 78mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 195mm.
Weight: 148g.
Closure: Fingers Safe Opening System
Clip: Titanium, machined from billet
Packaging: cardboard box, drawer-style, with Fox Knives logos - leather sheath, hydroformed, belt
Notes: Design by Denis Simonutti

Intended use: Sporting

Production type: Industrial
Country of production: Italy
Blade: Elmax steel at 61HRC
Blade finish: Satin finish
Handle: Stainless steel and Fat Carbon with gold highlights
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 160mm.
Weight: 110g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Bruno Bruna "Graciut"

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

Oyster Knife 

Presitigious Oyster Opener with handle made of stabilized oyster shells.

Made in France craftsmanship.

The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.

High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.

An ambidextrous oyster spear blade.

A minimum of care and maintenance ,

will enable you to keep your oyster knife in a condition that will amaze you for many years.

A nice discovery that of this oyster knife.

At last a useful and well-designed knife.

It should be mentioned that its designer, Benjamin Auzier, is a designer at @Laguiole.

He had the good idea of surrounding himself with oyster professionals from the Mediterranean basin.

He envisioned a tool that both left-handed and right-handed people can use without risk and with formidable efficiency. His workshop is located in La Boissière, in the Hérault.

The originality of its balanced and symmetrical teardrop shape over a length of 12 centimeters suits all hand morphologies.

If you want to have a practical professional tool for opening shellfish, the Little Juggler is for you.

Or for an original gift to a family member or friend.

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V 59/61HRC
Blade finish: Satin finish
Handle: Carbon fiber with anodized aluminum spacer
Blade length: 71mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.2mm.
Weight: 46g.
Closure: AxisLock
Clip: Removable and reversible, PVD stainless steel, Deep Carry type
Packaging: Cardboard box with Benchmade logos
Notes: -

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade Treatment: PVD Stonewashed
Handle: Titanium PVD Stonewashed and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel knocker
Clip: Bronze anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade treatment: PVD Stonewashed
Handle: "Space Coral" carbon fiber, Stonewashed PVD Titanium Frame and Hardware
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Pouch with Zip
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

Intended use: Collection / Keychain

Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved blade

tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath

Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial
Blade: in N690Co stainless steel
Blade treatment: Black DLC
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial,
Blade: in N690Co stainless steel
Blade treatment: Satin finish
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

The Opinel N°5 Inox knife is a versatile pocket tool, ideal for daily tasks such as opening packages, model making, or as a practical letter opener. Its 6 cm blade made of Sandvik 12C27M stainless steel offers excellent cutting quality and corrosion resistance, maintaining sharpness even after prolonged use. The beechwood handle, sourced from PEFC-certified French forests, is treated with protective varnish to resist moisture and dirt, ensuring a comfortable and ergonomic grip. It is important to note that the Opinel N°5 does not feature the Virobloc locking system; therefore, the blade stays open through friction, requiring careful handling during use. This knife embodies the traditional values of the Opinel brand: simplicity, durability, and efficiency.

• Intended use: Opening packages, model making, letter opener
• Production type: Industrial
• Country of production: France
• Blade: Sandvik 12C27M stainless steel
• Blade finish: Satin
• Handle: Varnished beechwood
• Blade length: 60 mm
• Blade thickness: 1.5 mm
• Closed length: 70 mm
• Total length: 130 mm
• Closed thickness: 10 mm
• Weight: 10 g
• Locking mechanism: Friction (no locking system)
• Clip: None
• Packaging: -
• Notes: Corrosion-resistant blade; minimal maintenance required

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Destination of use: Hiking

Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistle

Destination of use: Hiking

Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistle

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Purpose of use: Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: stonewash
Manicure: Titanium 6AL-4V
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 100mm
Total Length: 170mm.
Weight: 81g.
Closure: FrameLock
Clip: Titanium 6AL-4V
Packing: Cardboard box with Spartan Blades logos
Notes: GTC Alpha Ball Bearing Opening - Carson Flipper System Opening - Design by Keith Edick and Curtis Iovito

Opinel - 7 - stainless steel blade - knife

From the famous French company Opinel, a folding has become a timeless classic.
Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.

Ranked # 8
- Blade 7.5 cm, total length 17.5 cm
- Weight: 38 gr.

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

Walnut oyster knife

Presitigious Oyster Opener with wooden handle.

Made in France craftsmanship.

The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.

High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.

An ambidextrous oyster spear blade.

Wood handle from French forests .

They use wood of French origin to decorate the handles, which are machined and assembled in France.

A minimum of care and maintenance ,

will enable you to keep your oyster knife in a condition that will amaze you for many years.

The Opinel N°7 Inox knife is a classic in the Opinel range, renowned for its versatility and simplicity. Perfect for a wide variety of daily tasks, from food preparation to outdoor activities, this knife combines practicality and durability. Its 8 cm Sandvik 12C27M stainless steel blade offers excellent corrosion resistance and superior cutting performance, maintaining long-lasting sharpness. The beechwood handle, sourced from PEFC-certified French forests, is treated with protective varnish to resist moisture and provide a comfortable grip. Equipped with the Virobloc safety system, it allows the blade to be locked in both open and closed positions, enhancing safety during use and transport.

• Intended use: Daily tasks, cooking, hiking
• Production type: Industrial
• Country of production: France
• Blade: Sandvik 12C27M stainless steel
• Blade finish: Satin
• Handle: Varnished beechwood
• Blade length: 80 mm
• Blade thickness: 1.5 mm
• Closed length: 100 mm
• Total length: 180 mm
• Closed thickness: 15 mm
• Weight: 35 g
• Locking mechanism: Virobloc safety system
• Clip: None
• Packaging: -
• Notes: Corrosion-resistant blade; minimal maintenance required

Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -

The Opinel N°6 knife is an icon of practicality and design, perfect for outdoor activities and everyday tasks. Made in France, this knife combines tradition and innovation. The Sandvik 12C27 stainless steel blade, 7 cm long, offers excellent cutting quality and corrosion resistance, ensuring long-lasting performance over time.

The varnished beechwood handle, ergonomic and comfortable, fits perfectly in the hand, providing a stable grip. Thanks to the Virobloc safety system, the blade can be locked in both the open and closed positions, making it safe and reliable to use.

Weighing only 27 grams and with a total length of 16.5 cm, the Opinel N°6 is compact, lightweight, and easy to carry, making it ideal for hikers, artisans, or anyone looking for a practical and functional knife.

• Use: Outdoor, daily manual tasks
• Production type: Industrial
• Country of origin: France
• Blade: Sandvik 12C27 stainless steel
• Blade finish: Polished
• Handle: Varnished beechwood
• Blade length: 70 mm
• Blade thickness: 1.5 mm
• Closed length: 95 mm
• Total length: 165 mm
• Closed thickness: 10 mm
• Weight: 27 g
• Locking system: Virobloc system
• Clip: None
• Packaging: Cardboard box with Opinel logos
• Notes: Also available with a carbon steel blade; requires maintenance to prevent corrosion.

Intended use: Mushroom knife

Blade: Sandvik 12C27 stainless steel
Handle: oak wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 125mm.
Total length: 200mm.
Balancing: -
Weight: 95g.
Closure: viroblock
Clip: -
Sheath: in leatherette and fabric
Notes: Boar bristle brush, wooden gift box

For the fiftieth anniversary of the birth of Diabolik , one of the most loved by fans of comics noir , the cutlery Maserin , in collaboration with the publishing house Astorina , have created a version of " replica " of the famous knife throwing of the King of Terror . Weapon of choice by the character created in 1962 by the imagination of the Giussani sisters , the dagger "Diabolik Special Edition" Maserin replica of the features and style of the original knife , inseparable companion of many adventures Man of a Thousand Faces .

Type of production : Industrial
Production Blade: Italy
Blade: Stainless Steel 440 blunt
Treatment Lama : -
Handle material: TPE
Blade length : 160mm .
Blade thickness : 3.5mm .
Length closed: - mm .
Total length : 275mm .
Thick when closed: - mm .
Balance: -
Weight: 210g .
Closing: -
Clip: -
Sheath: nylon , Made in Italy , by Radar
Packaging : cardboard box with logos and Maserin Diabolik
Note : Product Exhibition / collectible officially licensed