Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

The Freedom XL is not just a knife, but a fragment of freedom hand-forged in Italy. Imposing in form and unique in essence, it is born from the encounter between strength and refinement: the D2 steel blade with a Marble finish speaks to the power of the material, while the Tan G10 and black Micarta handle embodies the solidity of artisan tradition.

With a length of 392 mm, its presence is felt, balanced by a recessed core that invites control and precision. Protected by a Kydex sheath designed to accompany it everywhere, the Freedom XL exists outside of time and catalogs: only two examples in the world, each with its own soul, destined for those who seek not a tool, but a rare and unique companion.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Marble
Handle: G10 Tan + Black Micarta
Blade length: 233mm.
Blade thickness: 5mm.
Total length: 392mm.
Balance: rear
Weight: 585g.
Sheath: Kydex, thermoformed, with belt loop attachment, M.O.L.L.E. compatible.
Packaging: no packaging - supplied with certificate of guarantee and authenticity.
Notes: discontinued model, handmade, only two examples made: one with clip point and one with drop point.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased and from a withdrawn private collection
* Condition: Perfect, like new
* Available on the market: Knife from the late 1980s/early 1990s, out of production and difficult to find
* Sharpness: Factory sharp, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Sheath: Present, with some minor signs of wear on the back 
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Created in the early 1980s from the vision of legendary designer Al Mar, the 3004 “De Oppresso Liber” is much more than a knife: it is a symbol of tactical excellence and special forces spirit.

Produced in a very limited series in Seki, Japan, this fixed blade knife was designed to meet the extreme standards of the U.S. Army's SERE (Survival, Evasion, Resistance, and Escape) units.

The engraved motto — “De Oppresso Liber,” “liberate the oppressed” — directly echoes the ethos of the American Green Berets.

Refined, robust, and now highly sought after by collectors, the 3004 represents one of the most iconic chapters in the history of modern military knives.

Intended use: tactical/collection

Country of manufacture: Japan
Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: satin
Handle: brown micarta
Blade length: 155mm. 
Blade thickness: 4mm.
Total length: 267mm.
Balance: on the guard
Weight: 245g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - supplied with original unopened packaging

Intended use: Tactical
Production type: Custom
Country of manufacture: Italy
Blade: D2 steel with 59-61 HRC hardness
Blade finish: Raw Finish
Handle: Sculpted black Micarta
Blade length: 180 mm
Total length: 315 mm
Weight: 794 g
Packaging: Black Kydex sheath
Notes: Design inspired by Roman daggers and American combat knives

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory


Intended Use: tactical / collection

Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm. 
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened box

Exclusive knife in entirely handmade "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:

Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.

Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.

Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.

Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.

Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.


Intended Use: Collection

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: "Comix" coloring, entirely made and painted by hand
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - comes with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio interno

Il KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari. 

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: light
* Marks on handle: light, on the guard
* Box: Original, with some marks
* Scabbard: Original, leather, with some small marks, also due to the insertion of the knife
* Manuals, Certificates and Warranties: Certificate present
* Checked and certified by our in-house laboratory

This limited edition Magnum Tanto style piece is based on a historical Japanese samurai sword that was popular during the Heian period (794-1185). The modified dagger-style blade, based on a design by the legendary blacksmith Amakumi, refers to the period when samurai lived the 'bushido' or 'way of the warrior'. The shape of this blade is called Kissagi-moroha and is derived from the Kogarasu-maru sword. The material of the blade is 440A stainless steel with a rich two-tone finish. The traditional handle is combined with synthetic material simulating tsuka and ray skin; the Tsuba provides a secure grip. Supplied with a genuine leather sheath and presentation box. Limited to 1,999 pieces worldwide, each serialised.

Intended use: Collection / Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: Ful tang in 440A steel
Blade finish: satin finish/polishing
Handle: canvas and synthetic ray skin
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 300mm.
Weight: 271g.
Sheath: black leather
Packaging: case with certificate of guarantee
Notes: Numbered and limited edition of 1999 pieces - Serial Number 136

Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.

Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.

Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.

Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -

La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive batch of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was responsible for the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated through bankruptcy in 1993. Production of the brand was subsequently taken over by Freidrich Olbertz in Solingen.

Survival knife produced in Germany since the 1970s.

Intended use: Collection/Survival

Type of production: industrial
Blade: ICE TEMPERED stainless steel, PVD coated
Country of production: Germany
Handle: brass coated with synthetic material, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap with o-ring
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 401g. (609G. scabbard included)
Scabbard: leather, with pocket containing a sharpening stone
Notes: original cardboard box

Translated with www.DeepL.com/Translator (free version)

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Intended use: Collection / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: mirror polishing
Handle: in micarta, with stainless steel guard
Blade length: 220mm.
Blade thickness: 4.6mm.
Total length: 350mm.
Weight: 408g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfibre cloth for cleaning
Notes: Limited edition of 1999 numbered copies

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmade

Intended use: collection / sport

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: in micarta, with stainless steel guard
Blade length: 178mm.
Blade thickness: 4.6mm.
Total length: 305mm.
Weight: 295g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition of 1999 copies - Design by John H. Davis

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Wood covered with leather strip
Blade Length: 175mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 315mm.
Closure thickness: -
Balance: -
Weight: 98g.
Closure: -
Clip: -
Sheath: Leather treated
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Intended use: hunting / sport

Type of production Semi-Industrial
Blade: SRS-15 semi-carbon steel 63 / 64HRC
Country of production: Seki City - Japan
Handle: micarta brown with loop guard and brass rivets
Blade length: 237mm.
Blade thickness: 6mm.
Overall length: 378mm.
Weight: 464g.
Sheath: Brown leather
Packaging: cardboard box with G. Sakai logos
Notes: Knife of the late '90s, brand new, mint conditions

Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 235mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 390mm .
Thick when closed: -
Balancing : -
Weight: 465g .
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo 
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife

Intended Use: Collection / Sports / Tactical

Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG Knives

Indiana - Vendetta Corsa - knife

Intended Use: Collection

Type of production: semi-homemade
Blade: Stainless steel 440
Production Blade: Italy
Handle: deer
Blade length: 230mm.
Blade Thickness: 3mm.
Closed Length: 270mm.
Overall length: 520mm.
Balancing: -
Weight: 444g.
Lock: back lock pump
clip:
Sheath: -
Notes: -

Destinazione d'uso: Tattico/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: Russia
Lama: asimmetrica, con affilatura a 20°, in acciaio inox 440C 58/59HRC
Trattamento Lama: Micropallinatura
Manicatura: Acciaio e legno di noce
Lunghezza lama: 200mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 345mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 332g.
Chiusura: -
Clip: -
Fodero: in cuoio nero, cucito a mano, con passante per cintura
Confezione: -
Note: Esemplare numerato e serializzato

Kukri - World War II Gurkha

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

Kukri - Nepal Police

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: legno
Lunghezza lama: 225 mm.
Spessore della lama: 10 mm.
Lunghezza totale: 355 mm.
Peso: senza fodero g. 524 - con fodero g. 666
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty