Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Titanium anodized HDL
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

Designed for those looking for a lightweight, compact EDC knife that is always ready for use, the Air Lite redefines the concept of everyday practicality. With a featherweight of only 90 grams and an ultra-slim thickness of 8.8 mm, this folder is designed to take up minimal space in your pocket, leaving room for other essential accessories - without compromising on quality and durability.

Each version of the series is made with the utmost care: the blades in high-quality Japanese AUS-10A stainless steel guarantee exceptional edge retention, strength, and durability, while the laser-cut authentic G10 scales ensure a solid and reliable grip.

Safety is ensured by the infallible Tri-Ad Lock, one of the world's most popular locking systems due to its strength and finger protection. With an affordable price, surprising sharpness, and exceptional comfort of use, the Air Lite is the ideal choice for those who want an EDC that is always by their side – lightweight, reliable, and virtually unbeatable.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: AUS-10A stainless steel
Blade treatment: Black Tuff-Ex finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Lock: Tri-Ad Lock
Clip: Reversible and removable, stainless steel with Black Tuff-Ex finish
Packaging: cardboard box with Cold Steel logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few small marks from time.
* Marks on handle: None
* Box: Espotive box present, with a few small marks due to time
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

2014 knife created through a collaboration between Fox and Hill Knives that commemorates the ISAF (International Security Forces) and ANSF (Afghan National Security Forces) memorial unveiled Sept. 22, 2013, in Kabul, Afghanistan, to honor fallen military personnel during peacekeeping operations in the country. The monument, with inscriptions in English, Pashtu and Dari, is a tribute to the different nationalities involved in the missions. The unveiling ceremony was attended by dignitaries from the Afghan government, security forces and ISAF, underscoring the value of remembrance and the sacrifices made.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Sheath: made of Kydex, with MOLLE clip
Packaging: Cardboard box / display box with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives - previously purchased knife from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Overall in excellent condition, sheath lanyard slightly worn (detailed photo available)
* Availability: Discontinued, limited edition of 15 pieces
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Not included
* Sheath: Included
* Manuals, Certificates & Warranty: Not included
* Inspected and Certified by our internal laboratory

Japanese steel meets Italian excellence

For this 2021 collaboration between Coltelleria Collini of Busto Arsizio and Fox Knives of Maniago, we decided to offer the 609OD Bushman, an outstanding bushcraft knife produced by Fox Knives of Maniago, using high-performance Japanese V-Toku2 Sanmai steel (5mm) from Takefu Steel instead of the D2 steel used in the standard model.

Specifically, we used high-carbon V-Toku2 at 62/63HRC for the central core and stainless SUS410 for the outer layers, ensuring exceptional cutting ability, penetration, and edge retention. At the same time, the blade offers high corrosion resistance and increased toughness due to the laminated structure and external stainless steel.

Technical Specifications

Like the ancient swords of the Japanese Samurai.

The laminated steel—imported into Italy by Collini Steel directly from Takefu Steel in Japan—follows the ancient Japanese tradition of crafting legendary Samurai swords. As early as the 1100s, Japanese blacksmiths combined different materials to create Katana swords with incredible cutting power, strength, and flexibility, unmatched at the time. This revolutionary forging technique has allowed Samurai swords to survive to this day as some of the most fascinating objects ever created.

By applying this tradition to modern metallurgy, we now have technologically advanced steels that have been tested and widely used in knife-making by renowned brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, and more.

San Mai Steel Features: This consists of different types of metals fused together to create a composite steel that enhances and intensifies the individual strengths of each material:

• Longer-lasting cutting edge: High-performance, high-carbon core steels (VG10, CoS, Shiro) or sintered steels (SPG2) provide exceptional hardness and cutting performance after heat treatment.
• Increased toughness: Inspired by Japanese sword-making, the multi-layered steel is highly resistant to breakage due to the toughness of the core steel and the flexibility of the outer stainless steel layers.
• Improved corrosion resistance: The outer stainless steel layers provide high corrosion resistance. The galvanic combination of Takefu Steel’s materials further enhances resistance along the edge.
• Ease of reworking after heat treatment: Unlike standard steels, the outer layers retain some softness even after hardening, allowing for easier processing, drilling, and welding.
• Enhanced aesthetics: Multi-layered or Damascus-patterned knives are visually striking, elegant, and highly sought after by collectors worldwide.

For more information: Collini Steel

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE FROM A PRIVATE COLLECTION
* Provenance: PDT YouTube channel.
* Condition: Overall in very good condition.
* Commercially available: By catalog
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: OD Green G10
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: knife used in a YouTube video review by Floriano of PDT

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Intended use: Sports / Excursion

Type of production: Industrial
Country of production: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: Micro shot peening
Handle: Black Jute Micarta with micro-blasted steel Bolsters
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 231mm.
Weight: 241g.
Sheath: in leather, with loops for horizontal port
Packaging: cardboard box with Fox logos
Notes: Design by Reichart Markus

Japanese steel blends with Italian excellence

For this 2022 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 103MB Outdoor model designed by Reichart Markus. Only 18 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago were made, using for this edition the Japanese V-Toku2 steel in Sanmai 5mm produced by the Japanese Takefu Steel instead of the Niolox used in the series model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee, in addition to a beautiful aesthetic effect, a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.

What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.

Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!

Intended Use: Sporty / EDC

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Japanese steel blends with Italian excellence

For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Technical features

Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.

Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Stonewashed PVD Titanium and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended use: collection

Blade: 440A stainless steel
Lama Italia production
Handle: in mana-worked wood by Santa Fè Stoneworks
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 170mm.
Balancing: -
Weight: 83g.
Closure: Blade Lock
Clip:
Sheath:
Notes: knife produced around 1998 by Fox in collaboration with Santa Fè Stoneworks

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade Treatment: Acid Stonewashed
Handle and Hardware: Titanium anodized HDL
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

outdoor knife produced by Fox between the late nineties and 2004 - Sturdy and comfortable knife for camping and hiking use. This rare model is characterized by the coating of the blade with a titanium surface which technically increases the resistance to oxidation and to the thread holding. Complete with scabbard

Intended use: Sports

Blade: 440A stainless steel with titanium coating
Lama Italia production
Handle: pakkawood pledge
Blade length: 110mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 250mm.
Balancing: -
Weight: 285g.
Closure: Back Lock
Clip:
Sheath: Cordura sheath
Note: -

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Carbon fiber with HDL copper "Snake Skin" inserts
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 115g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Titanium with Black PVD finish
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 140g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: G10
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 106g.
Closure: Fingers Safe Opening System
Clip: In stainless steel, flush
Packaging: box with Fox Knives logos, Nylon sheath with zip
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a multi-award-winning model such as the Suru with a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of the sharpening, while guaranteeing at the same time a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 60mm.
Blade thickness: 4mm.
Closed length: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 78g.
Closure: Frame Lock with stainless steel flap
Clip: flush, removable, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Opening via Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the SURU Carbon Fiber model, winner of the Blade Show 2018 as "Overall Knife of the Year" - Exclusive version Coltelleria Collini, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a multi-award-winning model like the Suru with a Japanese powder steel (sintered) and laminate (SanMai) by Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and durability of the sharpening, while simultaneously guaranteeing a remarkable resilience and resistance to oxidation. given by the lamination process of the blade.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: in Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade treatment: Satin finish
Handle: Stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closure: Frame Lock with stainless steel door
Clip: flush, removable, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Opening via Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the SURU Carbon Fiber model, winner of the 2018 Blade Show as "Overall Knife of the Year" - Exclusive version of Collini Cutlery, Sprint Run, with Takefu Steel SPG2 Laminate Japanese stainless steel.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of high quality steel with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the outer layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic rendering
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Intended Use: Collection

Type of production: Industrial crafted engraving of Mirella Pachì
Production Country: Italy
Blade: Stainless Damascus Super Dense Twist 364 layers (ATS34 + PMC27)
Handle: Damascus heads, grips in mammoth ivory with scrimshaw crafts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 180mm.
Weight: 92g.
Lock: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: Box exhibition in wood and glass with certified
Notes: Design by Francesco Pachì - Edition numbered and limited to only 100 pieces

Fox Scout Italy - 004 traditional knife in deer - knife

Simple but charming traditional knife produced in Italy and famous in the years 80/90 for camping / hiking.

Intended Use: Hunting / Camping / Vintage

Type of production: semi-crafted
Production Lama: Italy
Blade: 440A Stainless HRC 54/55
Treatment Lama: -
Handle: natural Cervo
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 195mm.
Thick when closed: -
Balancing: backward to 2cm.
Weight: 100g.
Sheath: Leather

ATTENTION: since it is natural material, the color of the horn may be different from that in this photo.

Intended use: Collection / Gentleman

Production Type: Semi-Industrial
Production Blade: Italy
Blade: Damascus steel ATS34 + pmc27 to 364 layers
Treatment Blade: -
Handle material: birch burl stabilized
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Overall length: 190mm.
Thick when closed: 19mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard gift box, warranty card
Notes: Design by Oreste Frati

Cold Steel Espada Extra Large CPM‑S35VN is the ultimate high-performance design for those seeking an imposing yet elegant folding knife. Inspired by the tradition of the Spanish navaja, this modern “pocket sword” combines premium CPM‑S35VN steel with robust and refined construction: mirror-polished blade, G‑10 handle, and polished 7075 aluminum frame. Thanks to the patented Tri‑Ad Lock mechanism, the Espada XL offers exceptional shock resistance, withstanding loads up to 600 lb in real-world testing. Despite its 7.5″ blade (approx. 191 mm) and total length of 16.75″ (approx. 425 mm), the knife remains surprisingly pocketable and accessible — a no-compromise heavy-duty tool for collectors, outdoor enthusiasts, LE operators, and bold design lovers.

Intended use: Sport / Defense / Collection
Production type: Industrial
Country of origin: Taiwan
Blade: CPM‑S35VN stainless steel
Blade finish: Polished
Handle: Black G‑10 with polished 7075 aluminum reinforcements
Blade length: 7.5″ (approx. 191 mm)
Blade thickness: 4 mm (0.157″)
Closed length: 9.25″ (approx. 235 mm)
Total length: 16.75″ (approx. 425 mm)
Closed thickness: (to be verified)
Weight: 16 oz (approx. 454 g)
Locking mechanism: Tri‑Ad Lock
Clip: Tip-up, right/left
Packaging: (to be verified)
Notes: High-strength Tri‑Ad Lock mechanism; high-performance CPM‑S35VN blade.