Collection Knives: For Knife Collectors and Custom Knife Enthusiasts

PRIVATE COLLECTOR'S KNIFE, PREVIOUSLY PURCHASED
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Factory, can be improved
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: Small signs given by time
* Box: -
* Sheath: Present, in good condition, with small signs given by time
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

The MBK-TI model is a utility knife designed to offer maximum reliability and discretion in the most demanding operational uses. Equipped with a 4-inch spear point blade, it was conceived as a more aggressive and compact solution for boot knife or neck knife use, particularly suitable for professional contexts in special operations, SWAT units and tactical environments.

Intended use: Multi-role / Boot Knife / Neck Knife

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 101mm.
Blade thickness: 5mm.
Total length: 203mm.
Weight: 99g.
Sheath: in kydex, thermoformed, with Tek-Lok multi-position attachment
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Professionally sharpened
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: None
* Box: -
* Sheath: Present and in excellent condition, Made in USA by SpecOps
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

Intended use: Multi-role

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 130mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Weight: 243g.
Sheath: Made in USA by SpecOps, in coyote colored Nylon, belt, MOLLE compatible, with thermoformed Kydex inner part
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in excellent condition (signs of wear typical of this model and material due to rubbing against the sheath)
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: Signs of wear typical of this model and material, due to rubbing against the sheath
* Marks on handle: N/A
* Box: Present and in excellent condition
* Sheath: Present and in excellent condition, never used, with normal signs of age
* Manuals, Certificates, and Warranties: /
* Checked and Certified by our in-house laboratory

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance, and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after intensive use.

The knives have been tested and selected by the US Navy SEALs, who have used them in sensitive missions and special operations. Thanks to their incredible strength, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and enthusiasts of high-end outdoor equipment.

Intended use: Multi-purpose / Diving

Type of production: Industrial
Blade: Beta Titanium with micro-shot peened finish
Country of manufacture: USA
Handle: Beta Titanium with micro-shot peened finish
Blade length: 125mm.
Blade thickness: 6.3mm.
Total length: 248 mm.
Weight: 151 g.
Sheath: thermoformed Kydex, with removable nylon belt loop for vertical carry on belt.
Packaging: cardboard box with Mission Knives logos.
Notes: previously purchased knife from a private collection - discontinued, iconic product from the early 2000s.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

Designed for those looking for a lightweight, compact EDC knife that is always ready for use, the Air Lite redefines the concept of everyday practicality. With a featherweight of only 90 grams and an ultra-slim thickness of 8.8 mm, this folder is designed to take up minimal space in your pocket, leaving room for other essential accessories - without compromising on quality and durability.

Each version of the series is made with the utmost care: the blades in high-quality Japanese AUS-10A stainless steel guarantee exceptional edge retention, strength, and durability, while the laser-cut authentic G10 scales ensure a solid and reliable grip.

Safety is ensured by the infallible Tri-Ad Lock, one of the world's most popular locking systems due to its strength and finger protection. With an affordable price, surprising sharpness, and exceptional comfort of use, the Air Lite is the ideal choice for those who want an EDC that is always by their side – lightweight, reliable, and virtually unbeatable.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: AUS-10A stainless steel
Blade treatment: Black Tuff-Ex finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Lock: Tri-Ad Lock
Clip: Reversible and removable, stainless steel with Black Tuff-Ex finish
Packaging: cardboard box with Cold Steel logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE FROM A PRIVATE COLLECTION
* Provenance: PDT YouTube channel.
* Condition: Overall in very good condition.
* Commercially available: By catalog
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: OD Green G10
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.

What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.

Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!

Intended Use: Sporty / EDC

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Sturdy bowie knife with clip point blade made of steel with a high carbon content.

Employment: Sports / Collection

Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:

Destinazione d'uso: Tattico/Sub

Tipo di Produzione: industriale
Lama: in Titanio Beta con finitura micropallinata
Produzione Lama USA
Manicatura: Hytrel
Lunghezza lama: 140mm.
Spessore della lama: 6.3mm.
Lunghezza totale: 267mm.
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: in Hytrel
Confezione: scatola di cartone con loghi Mission
Note: -

Cold Steel Espada Extra Large CPM‑S35VN is the ultimate high-performance design for those seeking an imposing yet elegant folding knife. Inspired by the tradition of the Spanish navaja, this modern “pocket sword” combines premium CPM‑S35VN steel with robust and refined construction: mirror-polished blade, G‑10 handle, and polished 7075 aluminum frame. Thanks to the patented Tri‑Ad Lock mechanism, the Espada XL offers exceptional shock resistance, withstanding loads up to 600 lb in real-world testing. Despite its 7.5″ blade (approx. 191 mm) and total length of 16.75″ (approx. 425 mm), the knife remains surprisingly pocketable and accessible — a no-compromise heavy-duty tool for collectors, outdoor enthusiasts, LE operators, and bold design lovers.

Intended use: Sport / Defense / Collection
Production type: Industrial
Country of origin: Taiwan
Blade: CPM‑S35VN stainless steel
Blade finish: Polished
Handle: Black G‑10 with polished 7075 aluminum reinforcements
Blade length: 7.5″ (approx. 191 mm)
Blade thickness: 4 mm (0.157″)
Closed length: 9.25″ (approx. 235 mm)
Total length: 16.75″ (approx. 425 mm)
Closed thickness: (to be verified)
Weight: 16 oz (approx. 454 g)
Locking mechanism: Tri‑Ad Lock
Clip: Tip-up, right/left
Packaging: (to be verified)
Notes: High-strength Tri‑Ad Lock mechanism; high-performance CPM‑S35VN blade.