bing

Coltelleria ed illuminazione

Shop By
Shopping Options
Brand
  1. Boker 1item
  2. Extrema Ratio 1item
  3. Fox Knives 2items
  4. Mcusta 9items
  5. Nitecore 8items
  6. Viper 7items
  7. Zero Tolerance 2items
  8. Approved 8items
  9. Bastinelli Knives 1item
  10. Esee Knives 1item
  11. Helle 1item
  12. Kershaw 1item
  13. MedFordKnives 2items
  14. MKM 9items
  15. Takefu knives 1item
Less
Stock
  1. In Stock 26items
  2. Out of Stock 28items
Rating
  1. 5
    7items
  2. 4
    & up
    11items
On Sale
  1. On Sale 6items
Set Ascending Direction

54 Items

  1. MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-3CM
    Special Price €159.84 Regular Price €187.70
    Only 3 left
    Only 3 left
  2. MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-1CM
    €187.70
    Only 1 left
    Only 1 left
  3. MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-2CM
    Special Price €159.84 Regular Price €187.70
    Only 3 left
    Only 3 left
  4. Viper - Basic 1 by T. Rumici - D2 & Green Canvas Micarta - VT4028CG - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Italy
    Blade: full tang in D2 steel
    Blade treatment: Stonewashed
    Handle: Micarta
    Blade length: 90mm.
    Blade thickness: 4mm.
    Total length: 203mm.
    Weight: 210g.
    Sheath: made of Kydex, with Tek-Lok type attachment
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4028CG
    €131.15
    Only 1 left
    Only 1 left
  5. Nitecore - NL1835LTHP - Protected Rechargeable Li-Ion 18650 3.6V 3500mAh Battery - For harsh climates and low temperatures

    High-performance 18650 battery (8A discharge) specially designed to withstand cold and harsh climates and temperatures as low as -40° C

    BATTERY FEATURES
    * Rechargeable Li-Ion 18650 cylindrical battery.
    * Rated voltage: 3.6V
    * Capacity: 3500mAh
    * Positive Pole: protruding
    * PCB protection circuit for internal voltage protection.
    * PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
    * Continuous discharge capacity: 8A


    DIMENSIONS
    * Length: 69.3±0.3mm / 2.73"±0.01"
    * Diameter: ≤18.7mm / 0.74"


    BATTERY PRECAUTIONS
    * Do not leave batteries unattended during charging.
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries.
    * We are not responsible for incorrect use or reversed polarity of batteries

    NI-NL1835LTHP
    €34.43
    Only 3 left
    Only 3 left
  6. Nitecore - NL1826RX with USB-C plug - Protected Rechargeable Li-Ion 18650 3.6V 2600mAh Battery and Power Bank

    Innovative and practical 18650 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

    BATTERY FEATURES
    * Rechargeable Li-Ion 18650 cylindrical battery and pocket power bank.
    * Rated voltage: 3.6V / 9.36Wh
    * Capacity: 2600mAh
    * Positive Pole: protruding
    * PCB protection circuit for internal voltage protection.
    * PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
    * USB-C Input and Output: 5V/1A

    DIMENSIONS
    * Length: 71±0.3mm
    * Diameter: 18.6mm±0.2mm

    BATTERY PRECAUTIONS
    * Do not leave batteries unattended during charging.
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries.
    * We are not responsible for incorrect use or reversed polarity of batteries

    NI-NL1826RX
    €15.16
    Only 3 left
    Only 3 left
  7. Nitecore - NL2142LTHPi - Li-Ion 21700 3.6V 4200mAh 15A protected rechargeable battery for low temperatures and harsh climates

    Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

    BATTERY FEATURES
    * Rechargeable Li-Ion 21700 cylindrical battery.
    * Rated voltage: 3.6V
    * Capacity: 4200mAh
    * Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
    * PCB protection circuit for internal voltage protection.
    * PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
    * Continuous discharge capacity: 15A

    BATTERY PRECAUTIONS
    * Do not leave batteries unattended during charging.
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries.
    * We are not responsible for incorrect use or reversed polarity of the batteries

    DIMENSIONS
    * Length: 76.8 +/- 0.3mm
    * Diameter: <22.3mm

    FLASHLIGHT COMPATIBILITY
    works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

    NI-NL2142LTHPi
    €29.51
    Only 2 left
    Only 2 left
  8. Nitecore - NL2142LTHPR - USB-C Li-Ion 21700 3.6V 4200mAh 15A protected rechargeable battery for cold temperatures and harsh climates

    High discharge power (15A) 21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C, rechargeable directly via built-in USB-C port or via conventional charger

    BATTERY FEATURES
    * Rechargeable Li-Ion 21700 cylindrical battery.
    * Rated voltage: 3.6V
    * Capacity: 4200mAh
    * Positive Pole: Protruding
    * PCB protection circuit for internal voltage protection.
    * PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
    * Continuous discharge capacity: 15A

    DIMENSIONS
    * Length: 76.8 +/- 0.3mm
    * Diameter: <22.3mm

    BATTERY PRECAUTIONS
    * Do not leave batteries unattended during charging.
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries.
    * We are not responsible for incorrect use or reversed polarity of batteries

    NI-NL2142LTHPR
    €27.87
    Only 8 left
    Only 8 left
  9. Nitecore - NL2142LTP - Li-Ion 21700 3.6V 4200mAh 8A protected rechargeable battery for low temperatures and harsh climates

    21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C

    BATTERY FEATURES
    * Rechargeable Li-Ion 21700 cylindrical battery.
    * Rated voltage: 3.6V
    * Capacity: 4200mAh
    * Positive Pole: Protruding
    * PCB protection circuit for internal voltage protection.
    * PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
    * Continuous discharge capacity: 8A

    DIMENSIONS
    * Length: 74.6 +/- 0.3mm
    * Diameter: <22.3mm

    BATTERY PRECAUTIONS
    * Do not leave batteries unattended during charging.
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries.
    * We are not responsible for incorrect use or reversed polarity of batteries

    NI-NL2142LTP
    €26.23
    Only 2 left
    Only 2 left
  10. Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife

    Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Blade: SPG2 61 / 62HRC
    Blade treatment: -
    Production Lama: Japan
    Handle: Damascus steel and pakka wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Closed length: 96mm.
    Total length: 166mm.
    Balancing: -
    Weight: 96g.
    Closure: Liner Lock
    Clip: -
    Sheath: cordura
    Note: -

    MC-0145G
    €254.10
    Only 1 left
    Only 1 left
    Out of stock
  11. Nitecore - NL2150HPi - Rechargeable Li-Ion battery 21700 3.6V 5000mAh 15A for i4000R and 21700i

    Designed exclusively for Nitecore i4000R torches and Nitecore lighting systems of the 21700i series

    BATTERY FEATURES
    * Rechargeable Li-Ion 21700 cylindrical battery
    * Nominal voltage: 3.6V
    * Capacity: 5000mAh
    * Positive Pole: Flat and present on the lower and upper part of the flashlight
    * PCB protection circuit for internal voltage protection
    * PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
    * Continuous Discharge Capacity: 15A


    BATTERY PRECAUTIONS
    * Do not leave the batteries unattended during the charging phase
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries
    * We are not responsible for misuse or reverse polarity of the batteries

    TORCH COMPATIBILITY
    works only with NITECORE i4000R torches and NITECORE 21700i series lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

    NI-NL2150HPi
    €27.87
    Only 2 left
    Only 2 left
    Rating:
    93%
    4.7
  12. Nitecore - NL2150HPR USB-C - Rechargeable Li-Ion battery 21700 3.6V 5000mAh 15A for E4K

    Designed for high power torches and devices that require a high amperage in the continuous discharge phase.

    The new Nitecore NL2150HPR is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C type charging port so that it can be recharged directly using a USB charging cable (sold separately).

    Just connect the battery to an available USB power source (for example to a PC or a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be complete.

    Alternatively, these batteries can be charged normally, like any rechargeable battery, ie using any external charger compatible with 21700 Li-Ion batteries.

    Equipped with built-in intelligent charging circuits and other safety features, this battery operates safely while following the precautions listed.

     

    BATTERY FEATURES
    * Rechargeable Li-Ion 21700 cylindrical battery
    * Nominal voltage: 3.6V
    * Capacity: 5000mAh
    * Positive Pole: Protruding
    * PCB protection circuit for internal voltage protection
    * PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
    * Continuous Discharge Capacity: 15A

    USB Charging Voltage: 5V
    USB Charging Current: 5A (Max)

    BATTERY PRECAUTIONS
    * Do not leave the batteries unattended during the charging phase
    * Do not charge over carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries
    * We are not responsible for misuse or reverse polarity of the batteries

    TORCH COMPATIBILITY
    recommended for the NITECORE E4K model

    NI-NL2150HPR
    €31.15
    Only 3 left
    Only 3 left
  13. Helle Norway - GT knife - No. 36 - knife

    Intended use: hunting / hiking

    Type of production: semi-artisanal
    Blade: 12C27 laminated stainless steel
    Handle: Birch and aluminum
    Blade length: 120mm.
    Blade thickness: 3mm.
    Total length: 240mm.
    Balancing: set back to 2.5cm
    Weight: 150g.
    Sheath: leather
    Note:

    HE-36
    €146.72
    Only 1 left
    Only 1 left
  14. Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade finish: Stonewashed
    Handle: Titanium and Carbon Fiber
    Blade length: 89mm.
    Blade thickness: 3.1mm.
    Length closed: 117mm.
    Total length: 210mm.
    Weight: 68g.
    Closing system: Frame Lock
    Clip: removable and reversible, in stainless steel with Black PVD treatment
    Opening system: Carson Flipper type on KVT ball bearings
    Packaging: cardboard box with Zero Tolerance logos
    Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

    ZT0707
    €282.79
    Only 1 left
    Only 1 left
  15. Viper - Berus 2 by T. Rumici - Green Canvas Micarta - VT4014CG - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: full tang in stainless steel M390 59 / 60HRC
    Blade treatment: Stonewashed
    Handle: Micarta canvas
    Blade length: 62mm.
    Blade thickness: 4mm.
    Total length: 154mm.
    Weight: 95g.
    Sheath: in Kydex
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4014CG
    Special Price €121.72 Regular Price €135.24
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  16. Viper - Berus 1 by T. Rumici - Green Canvas Micarta - VT4012CG - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: full tang in stainless steel M390 59 / 60HRC
    Blade treatment: Stonewashed
    Handle: Micarta canvas
    Blade length: 67mm.
    Blade thickness: 4mm.
    Total length: 154mm.
    Weight: 95g.
    Sheath: in Kydex
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4012CG
    Special Price €121.72 Regular Price €135.24
    Only 1 left
    Only 1 left
  17. Viper - Berus 2 by T. Rumici - Marbled Carbon Fiber - VT4014FCR - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: full tang in stainless steel M390 59 / 60HRC
    Blade treatment: Satin finish
    Handle: Marbled carbon fiber
    Blade length: 67mm.
    Blade thickness: 4mm.
    Total length: 154mm.
    Weight: 95g.
    Sheath: in Kydex
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4014FCR
    Special Price €147.54 Regular Price €163.93
    Only 1 left
    Only 1 left
  18. Viper - Berus 1 by T. Rumici - Marbled Carbon Fiber - VT4012FCR - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: full tang in stainless steel M390 59 / 60HRC
    Blade treatment: Satin finish
    Handle: Marbled carbon fiber
    Blade length: 67mm.
    Blade thickness: 4mm.
    Total length: 154mm.
    Weight: 95g.
    Sheath: in Kydex
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4012FCR
    Special Price €140.17 Regular Price €155.74
    Only 1 left
    Only 1 left
  19. MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co 59 / 60HRC stainless steel
    Blade treatment: Black Idroglider
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: on ball bearings
    Spacer: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-3PGO
    €86.07
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  20. MKM & Fox - Isonzo Clip Gray by Vox - MK-FX03-3PGY - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

    Intended use: Sports
    Type of production: Industrial by Fox Cutlery
    Country of production: Italy
    Blade: N690Co 59 / 60HRC stainless steel
    Blade finish: Stonewashed
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: on ball bearings
    Spacer and details: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-3PGY
    €86.07
    Only 1 left
    Only 1 left
  21. MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

    Intended use: Sports
    Type of production: Industrial by Fox Cutlery
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Black Idroglider
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: on ball bearings
    Spacer and details: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-2PGO
    €86.07
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  22. MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

    Intended use: Sports
    Type of production: Industrial by Fox Cutlery
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Stonewashed
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: on ball bearings
    Spacer and details: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-2PGY
    €86.07
    Only 1 left
    Only 1 left
  23. MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox


    Intended use: Sports / Tactical

    Type of production: Industrial by Fox Cutlery
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Stonewashed
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: Carson Flipper system on ball bearings
    Spacer and details: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-1PGY
    €86.07
    Only 1 left
    Only 1 left
  24. MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife

    Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox


    Intended use: Sports / Tactical

    Type of production: Industrial by Fox Cutlery
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Black
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: Carson Flipper system on ball bearings
    Spacer and details: in anodized aluminum
    Clip: steel, flush, removable and reversible
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-1PGO
    €86.07
    Only 1 left
    Only 1 left
  25. Fox - Baby Core by Vox - FX-608OR - Orange & Dark Stonewashed - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Dark Stonewashed
    Handle: FRN
    Blade length: 65mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 144mm.
    Thick when closed: 14mm
    Weight: 79g.
    Closure: Liner Lock
    Clip: flush, stainless steel, removable and reversible
    Packaging: Cardboard box with Fox Knives logos
    Notes: Design by Jesper Voxnaes

    FX-608OR
    €90.16
    Only 1 left
    Only 1 left
  26. Nitecore - NL2150R USB-C - Rechargeable Li-Ion 21700 3.6V 5000mAh protected battery

    You can recharge it normally, inserting it in a charger or recharge it like a mobile phone: inserting a USB-C cable!

    The new Nitecore NL2150R is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C charging port so that it can be recharged directly using a USB charging cable (sold separately).

    Just connect the battery to a available USB power source (for example to a PC or to a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be completed.

    Alternatively, these batteries can be charged normally, like any rechargeable battery, i.e. using any external charger compatible with Li-Ion 21700 batteries.

    Equipped with integrated intelligent charging circuits and other safety functions, this battery works in complete safety respecting the precautions indicated.

     
    BATTERY CHARACTERISTICS
    * Rechargeable Li-Ion 21700 cylindrical battery
    * Nominal voltage: 3.6V
    * Capacity: 5000mAh
    * USB charging voltage: 5V
    * USB charging current: 5A (Max)
    * Positive pole: Protruding
    * PCB protection circuit for internal voltage protection
    * PCB protection prevents 2.5V undervoltages and 4.25V overvoltages

    BATTERY PRECAUTIONS
    * Do not leave the batteries unattended during the charging phase
    * Do not reload on carpets, wooden tables or flammable materials
    * We are not responsible for damage resulting from tampering with the batteries
    * We are not responsible for incorrect use or with inverted polarity of the batteries

    NI-NL2150R
    €22.95
    Only 10 left
    Only 10 left
    Rating:
    100%
    5
  27. Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife

    Intended use: EDC / Gentleman

    Type of production: Industrial
    Country of production: USA
    Blade: CPM-20CV stainless steel
    Blade treatment: Stonewashed
    Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
    Blade length: 66mm.
    Blade thickness: 3mm.
    Length closed: 94mm.
    Total length: 157mm.
    Thick when closed: 10mm
    Weight: 51g.
    Closure: SlipJoint
    Clip: -
    Packaging: cardboard box with Zero Tolerance logos
    Notes: Design by Jens Anso

    ZT0235
    €209.02
    Only 1 left
    Only 1 left
  28. Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in very good condition.
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Box: -
    * Scabbard: Present - Original
    * Manuals, Certificates and Warranties: -
    * Checked and Certified by our in-house laboratory.



    The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

    The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



    Intended Use: Sporting/Collection

    Type of production: Industrial
    Blade production: Japan
    Blade: AUS-6 stainless steel
    Blade Finish: Powder coated
    Handle: Zytel
    Blade length: 180mm.
    Blade thickness: 6mm.
    Total length: 315mm.
    Balance: on the guard branch
    Weight: 359g.
    Sheath: made of kydex

    SOG-S37SEAL-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  29. Viper - Basic 3 by T. Rumici - MagnaCut & Green Canvas Micarta - VT4034CG - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Italy
    Blade: full tang in MagnaCut steel
    Blade treatment: Satin finish
    Handle: Micarta
    Blade length: 93mm.
    Blade thickness: 4mm.
    Total length: 204mm.
    Weight: 210g.
    Sheath: made of Kydex, with Tek-Lok type attachment
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4034CG
    €172.13
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  30. Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in very good condition.
    * Commercially available in hard-to-find trade.
    * Sharpening: Original
    * Marks on blade: no
    * Marks on handle: small abrasions on clip.
    * Box: -
    * Scabbard: - -
    * Manuals, Certificates and Warranties: - -
    * Checked and Certified by our in-house laboratory


    Intended Use: Sporting / Collection 

    Type of production: Midtech (semi-industrial)
    Country of manufacture: USA
    Blade: Stainless steel CPM-154CM
    Blade treatment: Dual tone: stonewashed and satin-finished
    Handle: stonewashed titanium
    Blade length: 80mm.
    Blade thickness: 3.2mm.
    Length closed: 112mm.
    Total length: 195mm.
    Thickness when closed: 10mm.
    Weight: 130g.
    Closure: Framelock
    Clip: Removable, titanium
    Notes: knife withdrawn from private collection

    JB-RF-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  31. Mikkel Willumsen - Custom Titanium Frame Lock - PRIVATE COLLECTION - handcrafted knife

    Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased.
    * Condition: Overall in very good condition
    * Commercially available Unique specimen made in 2008.
    * Sharpening: Original, with a few small marks from use.
    * Marks on blade: A couple of small marks.
    * Marks on handle: A couple of small abrasions on titanium folder.
    * Box: -
    * Scabbard: - -
    * Manuals, Certificates and Warranties: - -
    * Checked and Certified by our in-house laboratory



    Intended Use: Collection 

    Production type: custom
    Country of production: Denmark
    Blade: handcrafted and beveled, stainless steel RWL-34
    Blade treatment: dual tone: stone washed and handcrafted satin finish
    Handle: micropallinated titanium and carbon fiber
    Blade length: 107mm.
    Blade thickness: 4mm.
    Length closed: 137mm.
    Total length: 245mm.
    Thickness when closed: 15mm.
    Weight: 215g.
    Closure: Framelock
    Clip: Removable, anodized titanium
    Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing opening

    MW-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  32. Mcusta - Platinum Label Blade Show 2022 Limited Edition - MCPLBS-22 - knife

    Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

     


    Intended use: collection

    Type of production: industrial cutting - craftsmanship, assembly and finishing
    Country of production: Seki - Japan
    Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
    Handle: made of Mokume stainless damask steel and wood briar
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thickness when closed: 14mm.
    Weight: 208g.
    Closure: Liner Lock
    Clip: handcrafted, removable and reversible, hammered stainless steel
    Packaging: wooden box with Mcusta logos
    Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

    MC-PLBS22
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  33. Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife

    Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

    The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cutting - handcrafted assembly and finishing
    Production Lama: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Pakka Wood
    Blade length: 95mm.
    Blade thickness: 3mm.
    Closed length: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g.
    Closure: Liner Lock
    Clip: in stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used, you can visit the website: www.collinisteel.com

    AP-MC-0203G
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  34. Buck - Simonich Raven Legacy Knife 0895BKS - 2008 - PRIVATE COLLECTION - knife

    Knife withdrawn from a private collection. Produced in 2008, it was born from the collaboration between Buck and Simonich Knives. The result is a sturdy, yet handy full tang tactical knife.
    Overall in excellent condition - Checked and certified by our in-house Coltelleria Collini laboratory, it comes complete with original box.

    Intended use: Sports / Collection

    Type of production: Industrial
    Production Lama: USA
    Blade: Bos-hardened CPM S30V stainless steel
    Handle: G10
    Blade length: 125mm.
    Blade thickness: 4mm.
    Total length: 255mm.
    Balancing: set back from the guard branch at about 40mm.
    Weight: 230g. (317g. Including scabbard)
    Sheath: in black Nylon
    Packaging: Official cardboard box with Buck logos

    0895BKS-B-CP
    €0.00
    Only -50 left
    Only -50 left
    Rating:
    100%
    5
    Out of stock
  35. Medford Knife and Tools - Praetorian Tanto - S35VN - Flamed Blue Titanium - knife

    Intended Use: Tactical/Collection

    Production type: Custom
    Country of Production: Usa
    Blade: Stainless steel CPM S35 VN 
    Blade finish: Tumbled
    Handle: Blue anodized titanium, flamed
    Blade Length: 95mm.
    Blade thickness: 5mm.
    Total length: 227mm.
    Thickness when closed: 13mm.
    Weight: 245g.
    Locking mechanism: Frame Lock
    Clip: Titanium, flamed
    Package: Tactical polymer case, with Medford logos
    Notes: Designed and built by Greg Medford

    ME-PRE-T-FBT
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  36. Viper - Berus 1 by T. Rumici - Carbon Fiber - VT4012FC - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Italy
    Blade: full tang in stainless steel M390 59 / 60HRC
    Blade treatment: Satin finish
    Handle: Carbon fiber
    Blade length: 67mm.
    Blade thickness: 4mm.
    Total length: 154mm.
    Weight: 95g.
    Sheath: in Kydex
    Packaging: cardboard box with Viper logos
    Notes: design by Tommaso Rumici

    VT4012FC
    €151.64
    Only -20 left
    Only -20 left
    Out of stock
  37. Takefu Village - Kama - Hand Forged Damascus Steel Sickle - Sickle

    Beautiful traditional Japanese sickle handcrafted in laminated steel from Takefu Knives Village. Brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.

    Kama Features:

    Use: collection / gardening

    Blade: CladSteel carbon steel with 62 / 64HRC White Paper Steel (Shirogami) cutting edge and 33-layer "Suminagashi" damask
    Lama origin: Japanese craftsmanship
    Handle: Wood
    Packaging: -
    Blade length: 195mm
    Total length: 430mm
    Blade thickness: 3.7mm
    Handle length: 360mm
    Weight: 264g

    The kama is a traditional agricultural tool typical of Japan and Okinawa, similar to a small sickle used to harvest wheat, and also used as a weapon. Before being used in martial arts, kama was used extensively in Asia to cut crops, especially rice.

    OK-SKD
    €131.15
    Only -50 left
    Only -50 left
    Out of stock
  38. Kershaw - Bareknuckle Carbon Fiber Flipper - M390 Sprint Run - 7777CFM390 - Knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Country of production: USA
    Blade: M390 stainless steel
    Blade treatment: Blackwash
    Handle: Carbon fiber
    Blade length: 89mm.
    Blade thickness: 3mm.
    Length closed: 118mm.
    Total length: 207mm.
    Thick when closed: 11.5mm.
    Weight: 84g.
    Closing: Sub FrameLock
    Clip: Removable and multi-position, in Teflon coated stainless steel
    Packaging: cardboard box with Kershaw logos
    Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearings

    K7777CFM390
    €171.31
    Rating:
    93%
    4.7
    Out of stock
  39. Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife

    Intended use: Tactical

    Type of production: Industrial
    Country of production: Maniago - Italy
    Blade: stainless steel N690Co
    Blade treatment: Blackwashed
    Handle: G10
    Blade Length: 66mm.
    Blade thickness: 3mm.
    Closed length: 120mm.
    Total length: 184mm.
    Closed thickness: 15mm.
    Weight: 102g.
    Opening: Emerson Wave type system
    Washers: Brass
    Closure: Liner Lock
    Clip: Stainless steel removable and reversible
    Packing: Cardboard box with Bastinelli Knives logos
    Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMD

    BC-0618
    €237.70
    Only -99 left
    Only -99 left
    Out of stock
  40. Boker - Magnum Collection 2020 - Limited Edition - 02MAG2020 - knife

    Intended use: Collection / Utility

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in steel D2
    Blade finish: sandblasted
    Handle: G10
    Blade length: 173mm.
    Blade thickness: 5mm.
    Total length: 324mm.
    Weight: 459g.
    Sheath: in black leather
    Packaging: gift box with warranty certificate and microfiber cleaning cloth
    Notes: Limited and numbered edition of 1999 copies - Design by Dietmar Pohl (Pohl Force)

    BO-02MAG2020
    €0.00
    Only -99 left
    Only -99 left
    Rating:
    100%
    5
    Out of stock
  41. Allen Elishewitz - Custom Titanium Frame Lock - PRIVATE COLLECTION - handmade knife

    Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.

    Intended use: Collection

    Type of production: custom
    Country of production: USA
    Blade: handcrafted and bevelled, in CPM-154CM stainless steel
    Blade treatment: hand satin finish
    Handle: full scales in titanium with blue anodizing
    Blade length: 82mm.
    Blade thickness: 3.5mm.
    Length closed: 130mm.
    Total length: 184mm.
    Thick when closed: 11mm.
    Weight: 96g.
    Closing: framelock
    Clip: removable, stainless steel
    Notes: Made entirely by hand by Allen Elishewitz

    AE-CU-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  42. EOS Elite Outfitting Solutions knife - PRIVATE COLLECTION - Black Surgeon Titanium - knife

    Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

    Intended use: Tactical / EDC / Collection

    Type of production: semi-artisan
    Country of production: USA
    Blade: in CTS-XHP Black stainless steel
    Blade treatment: Black PVD
    Handle: Grade 5 titanium
    Blade length: 92mm.
    Blade thickness: 5mm.
    Length closed: 122mm.
    Total length: 216mm.
    Thick when closed: 13.2mm.
    Balancing: -
    Weight: 187g.
    Opening: titanium thumbstood for right-handers
    Washers: Steel ball bearings
    Closing: Framelock
    Clip: titanium, removable
    Packaging: nylon bag with EOS logos
    Note: -

    EOS-ST-CP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  43. Medford Knife and Tools - Praetorian Tanto knife CPM-S35VN - 2 Full Bronze Titanium - knife

    Intended use: Tactical / Collection

    Type of production: Custom
    Blade production: Usa
    Blade: CPM S35 VN steel
    Blade treatment: -
    Handle: full titanium
    Blade length: 95mm.
    Blade thickness: 5mm.
    Total length: 227mm.
    Thick when closed: 13mm.
    Balancing: on the guard branch
    Weight: 245g.
    Closure: Frame Lock
    Clip: titanium custom flamed clip
    Sheath: -
    Packaging: polymer tactical case with Medford logos
    Notes: Designed and built by Greg Medford

    ME-PRE-T-T
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  44. Buck - Kalinga knife 1991 - 401 - Wood - PRIVATE COLLECTION - knife

    Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

    The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

    Intended use: Sports / Collection

    Type of production: Industrial
    Blade production: USA
    Blade: full tang, 420HC stainless steel
    Blade treatment: -
    Handle: Wood
    Blade length: 115mm.
    Blade thickness: 4.5mm.
    Length closed: -
    Total length: 255mm.
    Thick when closed: -
    Balancing: -
    Weight: 322g.
    Closing: -
    Clip: -
    Sheath: brown leather
    Packaging: Cardboard box with Buck logos, with certificates
    Note:

    BU-401-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  45. Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife

    Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

    Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
    On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

    Intended use: collection

    Type of production: industrial cutting - craftsmanship, assembly and finishes
    Lama production: Japan
    Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
    Handle: in stainless damask with dark purple corian insert and copper and gold inlays
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 14mm.
    Weight: 141g.
    Closure: Liner Lock
    Clip: -
    Packaging: wooden box with Mcusta logos
    Notes: limited edition 100 pieces

    For more information on the steel used you can view the site: www.collinisteel.com

    MCSY-001
    €614.75
    Only -50 left
    Only -50 left
    Out of stock
  46. Mcusta - Takeri Shinra Maxima knife - SPG2 Powder Steel - Damascius - MC-0202G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Damascus
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 211mm.
    Thick when closed: 17.5mm.
    Weight: 170g.
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0202G
    €323.77
    Only 0 left
    Only 0 left
    Out of stock
  47. Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Pakka wood
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 207mm.
    Thick when closed: 17.5mm.
    Weight: 100g
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0203G
    €311.48
    Only 0 left
    Only 0 left
    Out of stock
  48. Mcusta - Minagi Shinra Maxima knife - SPG2 Powder Steel - Blue Micarta - MC-0201G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

    Intended use: sports / collection

    Type of production: industrial cut - assembly and handmade finishes
    Lama production: Japan
    Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
    Handle: Micarta
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 211mm.
    Thick when closed: 17.5mm.
    Weight: 105g.
    Closure: Liner Lock
    Clip: stainless steel
    Packaging: cardboard box with Mcusta logos
    Note: -

    For more information on the steel used you can view the site: www.collinisteel.com

    MC-0201G
    €303.28
    Only 0 left
    Only 0 left
    Rating:
    93%
    4.7
    Out of stock
  49. Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife

    Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

    Intended use: dirty / collection

    Type of production: industrial cut - assembly and handmade finishes
    Blade: SPG2 61 / 62HRC
    Blade treatment: -
    Lama production: Japan
    Handle: damask steel and pakka wood
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 96mm.
    Total length: 166mm.
    Balancing: -
    Weight: 96g.
    Closure: Liner Lock
    Clip: -
    Sheath: cordura
    Note: -

    MC-0146G
    €245.90
    Only 0 left
    Only 0 left
    Out of stock
  50. Fox - Baby Core knife by Vox - FX-608BL - Blue & Stonewashed - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Country of production: Italy
    Blade: N690 59 / 60HRC stainless steel
    Blade finish: Stonewashed
    Handle: FRN
    Blade length: 65mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 144mm.
    Thick when closed: 14mm
    Weight: 79g.
    Closure: Liner Lock
    Clip: flush, stainless steel, removable and reversible
    Packaging: Cardboard box with Fox Knives logos
    Notes: Design by Jesper Voxnaes

    FX-608BL
    €81.97
    Only 0 left
    Only 0 left
    Rating:
    90%
    4.5
    Out of stock
  51. Spyderco - Centofante 3 knife - PRIVATE COLLECTION - C66PBK3 - knife

    Knife taken from a private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

    Intended use: Sports

    Type of production: Industrial
    Blade production: Japan
    Blade: VG10 stainless steel
    Blade treatment: -
    Handle: Glass fiber reinforced with Nylon (FRNR)
    Blade length: 79mm.
    Blade thickness: 2mm.
    Length closed 114mm.
    Total length: 192mm.
    Balancing: -
    Weight: 71g.
    Closing: Back Lock
    Clip: removable, stainless steel
    Sheath: -
    Packaging:
    Note: -

    SP-C66PBK3
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  52. ExtremaRatio - E.C.M. Cobra - ECM Einsatzkommando - Knife

    The Extreme Ratio E.C.M. (Einsatzkommando Cobra Messer) is a fixed blade multipurpose knife, designed for operational uses for the famous Einsatzkommando "Cobra" special unit of the Austrian police, whose logo is laser engraved on the heel of the blade. The Extreme Ratio E.C.M. it combines the characteristics of a practical tool and those of a reliable weapon, in a compact configuration with a total weight of 240g.

    The blade is made of Böhler N690 steel, hardened to 58 HRC and is 116 mm long, 5 mm thick and equipped with a flat edge. The profile of the blade is of the modified spear point type, with a false counter-thread ¾ in length on the back and a lower guard to protect the hand during use.

    Both the guard and the knob have holes to facilitate the attachment of the knife to various tools or for the passage of laces. The blade has a Carbon-based DLC (Diamond-Like Carbon) surface coating making it hyper-resistant to abrasion and chemical aggression.

    Given the heavy use of the tool, for the handle, instead of the usual Forprene, the more performing high-strength G10 is used.

    It is fixed to the FULL TANG profile by two through screws and maintains all the known ergonomic characteristics of the Extrema Ratio handles. Being a knife designed for professional use, great importance was given to ease of port, accessibility and rapid extraction.

    The polymer sheath is versatile and can be carried on a service belt or mounted on M.O.L.L.E. of tactical vests, backpacks or other equipment.

     

    Intended use: Tactical / Military

    Type of production: Industrial
    Country of production: Italy
    Blade: Bohler N690Co stainless steel at 58HRC
    Blade treatment: DLC (Diamond Like Coating)
    Handle: G10
    Blade length: 106mm.
    Blade thickness: 5mm.
    Total length: 233mm.
    Weight: 240g.
    Sheath: Synthetic, polymer, MOLLE compatible
    Packaging: Cardboard box with Extrema Ratio logos

    ER-ECM
    €315.57
    Only -1 left
    Only -1 left
    Out of stock
  53. Mcusta - Teana knife - Shinra Mixture - SPG2 Powder Steel - MC-0143G - knife

    Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

    Intended use: dirty / collection

    Type of production: industrial cut - assembly and handmade finishes
    Blade: SPG2 61 / 62HRC
    Blade treatment: -
    Lama production: Japan
    Handle: satin steel and wooden insert
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 96mm.
    Total length: 168mm.
    Balancing: -
    Weight: 82g.
    Closure: Liner Lock
    Clip: present
    Sheath: cordura
    Note: -

    MC-0143G
    €229.51
    Out of stock
  54. ESEE Knives - Esee-5P knife OD Green - WITHOUT SHEATH - knife

    ATTENTION: the knife is sold without scabbard and without accessories

    Intended use: Sports

    Type of production: Industrial
    Blade production: USA
    Blade: 1095 carbon steel
    Blade treatment: Green textured powder coat
    Handle: Green Canvas Micarta
    Blade length: 137mm.
    Blade thickness: 6.3mm.
    Length closed: -
    Total length: 277mm.
    Thick when closed: -
    Balancing: -
    Weight: 448g.
    Closing: -
    Clip: -
    Sheath: not included
    Packaging: Transparent plastic bag
    Note: -

    2837-5G
    €151.64
    Out of stock
Set Ascending Direction

54 Items