Nitecore Flashlights

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

KEY FEATURES:

* Equipped with a dual beam system that combines a reflector for projectors and an optical lens for spotlights, with a maximum power of 2,000 lumens.
* Uses a LEP light source and 5 LEDs for projectors.
* Option to use Adaptive Cruise mode, which automatically adjusts brightness based on the angle of the torch.
* Peak light beam intensity of 2,130,800 cd and maximum range of 2,900 meters
* Designed with a tail switch and two level adjustment buttons
* Includes a NITECORE NL2155HP 21700 rechargeable lithium-ion battery (5,500 mAh) that provides up to 20 hours of runtime.
* Intelligent lithium-ion battery fast charging circuit with USB-C charging port
* An indicator displays the remaining battery level
* Highly efficient constant current circuit
* Built-in advanced temperature regulation (ATR) module
* Optical lens with scratch-resistant coating on both sides
* Constructed from aerospace-grade aluminum alloy
* Military-grade HA III hard anodized finish
* IP68 rating (2 meters of submersion)
* Impact and drop resistance up to 1 meter

LEDs: 5 x LEDs + 1x Class 1 LEP laser, with a lifetime of over 50,000 hours
Operating modes: 3 operating modes (Flood, Spot, and Mix) for a total of 10 different electronically adjustable light intensities
Power and duration TURBO: 2000 lumens (1h)
FLOOD power and duration: 800 lumens (2h and 30min.) -> 400 Lumens (4h) -> 100 Lumens (20h)
SPOT power and duration: 400 lumens (2h and 30min.) -> 200 Lumens (3h and 45min) -> 50 lumens (20h)
MIX power and duration: 600 lumens (2h and 30min.) -> 300 lumens (4h) -> 80 lumens (20h.)
Peak power: 2130800 candelas
Maximum illumination distance: 2900m.
Switching method: Rear button with “Momentary On” system for light signals
Light selection method: Front buttons or via Adaptive Cruise system 
Head: aeronautical aluminum 
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: optical, with scratch-resistant coating
Batteries: works with a rechargeable 21700 battery (NL2155HP 5,500mAh) included in the package. 
Dimensions: 18.6cm (L) - 2.9cm (D barrel) - 6.7cm (D head)
Weight: 390g. batteries not included
Included accessories: NL2155HP battery, Cordura holster, wrist strap, USB charging cable, spare O-ring
Waterproof: IP68 standard, submersible up to 2m deep for 30min.
Sheath: Cordura, belt-mounted
Impact resistance: withstands drops from a height of 1 m

Nitecore Italy warranty: Flashlight guaranteed for 5 years - Battery guaranteed for 12 months

Nitecore NTK09 – Precision in Titanium

In the silence of a pocket, amid everyday moments and gestures, beauty meets function: the Nitecore NTK09 is a whisper of precision in titanium. Light as a fleeting thought, but strong as a promise, it accompanies our most mundane actions – cutting an envelope or peeling a piece of fruit – with the discreet elegance of a faithful companion.

Technical Data
Dimensions: 73.5 × 23.3 × 7.0 mm
Weight: 24 g (including blade)
Body material: TC4 titanium alloy
Blade material: carbon steel (compatible with standard 11-921 blades)
Locking mechanism: interlocking slide with secure lock
Handle: non-slip surface with ergonomic structure
Extra features: integrated bottle opener, key ring hole
Design: CNC-machined unibody structure, satin finish

Strengths
Compact and lightweight, ideal for everyday use
Premium materials: titanium and carbon steel
Easy blade replacement
Safe and precise lock
EDC versatility thanks to integrated functions

The NTK09 is an example of functional minimalism: no frills, just science and aesthetics. A tool that fits into your routine without disturbing it, but demonstrates its technical soul with every refined gesture.

Key Features
* Maximum power of 2,000 lumens
* Maximum range of 412 meters and peak beam intensity of 42,500 cd
* Combined optical system with crystal coating and Precision Digital Optics Technology (PDOT)
* Powered by a lithium-ion battery (1,900 mAh) with USB-C charging port
* STROBE mode with variable frequencies for more effective dazzling effects
* Lock mode available to prevent accidental activation
* Compact and lightweight design, ideal for transport
* Built-in advanced temperature regulation module (ATR) (patent no. ZL201510534543.6)
* Recoil-proof design
* Ambidextrous, dual-button design
* Highly efficient constant current circuit provides stable light output
* Constructed of aircraft-grade aluminum alloy with military-grade HA III anodized finish.
* IPX6 waterproof and dustproof rating
* Impact resistant up to 2 meters

Mounting system and compatibility
Mounting is simple: just align the rail lock with the recoil groove on the slide and slide the flashlight into the desired position. Included in the package is an adapter bracket for Picatinny rails, with screws and a wrench for installation.

Ambidextrous controls
The side buttons, located on both sides of the body, make the NPL35 easy to use for both right-handed and left-handed users. Activation is quick and intuitive, perfect even under stressful conditions.

Technical specifications
Maximum brightness: 2000 lumens
Beam distance: up to 412 meters
Light intensity: 42,500 cd
IP rating: IPX6
Impact resistance: up to 2 m
Dimensions: 88.1 x 37.1 x 36 mm (L x W x H)
Weight: 129g.
Brightness outputs

Mode / power / duration
* High    - 2000 lumens for 1 hour and 45 minutes
* Low    - 320 lumens for 3 hours and 15 minutes
* Strobe    - 2000 lumens

Package contents
Nitecore NPL35 flashlights
1900mAh rechargeable battery
USB-C charging cable
Picatinny rail adapter
Allen key
Screws (x4)

The Nitecore HALO 10 Titanium Curve Measure Ring is a compact and innovative instrument designed to measure curved or irregular surfaces. Made of aircraft-grade titanium alloy by precision CNC machining, it offers strength, light weight and a high-quality finish. Equipped with an integrated high-precision bearing, it allows smooth rotation, facilitating the measurement of objects with complex shapes.

Data Sheet.
* Material: aircraft-grade titanium alloy.
* Diameter: 31.9 mm
* Thickness: 7.9 mm
* Weight: 26 g

Functions:
* Measurement of curved and irregular surfaces e.g., diameters and circumferences.
* Stress-relieving gadget (fidget toy).
* Can be used as a necklace (chain included)

Additional features:
* Integrated bearing for smooth rotation.
* Compact and lightweight design
* Sleek and modern aesthetics

Discover the Kydex holster designed for the NITECORE NPL25 and NPL25GL tactical flashlights, an ideal solution for those seeking safety, practicality and durability.

Compatible with SIG Sauer P320 and SIG Sauer M18 models, it offers a Level 2 thumb-press release system for quick access to the weapon.

Made of sturdy 2.36 Kydex, it features a removable stainless steel clip for stable and secure attachment. Available in black, it is the perfect choice for professionals and tactical shooting enthusiasts.

Compatibility: SIG Sauer P320 and M18 models
Release: Level 2 thumb pressure
Material: Kydex 2.36
Attachment: stainless steel clip, removable
Available colors: Black

NITECORE CL10 - Ultralight Multipurpose Light with Clip

The NITECORE CL10 is an ultralight multipurpose light, perfect for those who need versatile lighting in a variety of situations. With its built-in clip, it can be easily attached to clothing, hats or pockets, providing hands-free lighting. The compact design and light weight make it ideal for outdoor activities, camping, reading and emergency situations.

Key Features.
✔ Three light sources: white, red and blue light to suit different needs.
✔ Red/blue flashing function: useful for alerts and warnings in nighttime environments.
✔ AAA battery compatible: uses two readily available AAA batteries.
✔ Built-in clip: allows attachment to various holders for convenient use.
✔ 180° adjustable head: allows the light beam to be oriented in the desired direction.

Technical specifications.

Maximum brightness: 45 lumens
Beam distance: up to 15 meters
Battery life: up to 28 hours in low light mode
Lighting modes:
White light
Red light
Blue light
Red/blue flashing

Dimensions and weight
Length: 56.5 mm
Width: 22.4 mm
Height: 45 mm
Weight: 28 g

Ideal for
✅ Hikers and campers
✅ Emergency activities and signaling
✅ Proximity reading and lighting
✅ Professional and operational use

The NITECORE CL10 is a compact and reliable solution for those seeking a versatile and lightweight light source. With its long battery life and multiple lighting options, it is perfectly suited to every need.

The Nitecore NPL25 GL represents an innovative solution for modern tactical needs, combining a powerful 900-lumen LED flashlight with a precision green laser sight (520nm). This compact and lightweight accessory is designed to deliver unmatched performance in illumination and precise targeting, making it ideal for operations in critical environments and tactical scenarios. Made with durable aerospace-grade materials and certified IPX6, the NPL25 GL is robust and ready to withstand extreme conditions.

Thanks to its advanced optical system and ATR (Advanced Temperature Regulation) technology, this device ensures stable and efficient lighting, guaranteeing reliability even during extended use. Installation is simple and quick, making the NPL25 GL an essential tool for professionals and tactical enthusiasts.

• White Light Mode (High): 900 lumens, runtime of 43 minutes, range of 216m.
• White Light Mode (Low): 120 lumens, runtime of 1 hour and 30 minutes, range of 79m.
• Green Laser + White Light Mode (High): 900 lumens + Laser, runtime of 43 minutes, range of 216m.
• Green Laser Mode (Only): <5mW, runtime of 10 hours.

Impact Resistance: 2 meters.

Waterproof: IPX6.

Compact tactical flashlight with green laser: The NPL25 GL integrates a high-power UHi25 LED (900 lumens) and a green laser (520nm), designed to enhance aiming accuracy.

Lightweight and compact: Weighing just 74g (2.61 oz) with ultra-compact dimensions (62 x 33 x 32 mm), it is perfect for tactical use.

• LED: 1x UHi20 with a lifespan of 50,000 hours.
• Operational Modes: Press and hold one of the power buttons for momentary tactical activation, or briefly press for constant activation.
• Brightness and Durations: 900 lumens (35 min.)
• Peak Power: 11,900 candela.
• Maximum Beam Distance: 216m.
• Switch Type: Dual ambidextrous switches located at the tail.
• Head: Aerospace-grade aluminum.
• Body: Aerospace-grade aluminum.
• Finish: Anodized Type III.
• Lens: Ultra-clear tempered glass with anti-reflective coating.
• Batteries: Powered by a proprietary rechargeable Li-ion battery (3.7V / 500mAh / 1.85Wh).
• Dimensions: 5.6cm (Length) - 3.3cm (Width) - 3.2cm (Thickness, including rail).
• Weight: 74g with battery installed.
• Included Accessories: Magnetic charging cable, rail mount.
• Waterproof: Meets IPX6 standards.
• Impact Resistance: Withstands drops from a height of 1 meter.
• Notes: Universal quick-attach rail compatible with Glock and Picatinny systems.

TECHNICAL SPECIFICATIONS:
Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3500 Lumens (45min) -> 1300 Lumens (4.15h) -> 400 Lumens (13h) -> 80 Lumens (62h) -> Strobe -> Beacon -> S.O.S.
Peak power: 423000 candles
Maximum lighting distance: 1300m.
Lighting Method: Rear Button with “Momentary On” system for light signals or by wireless remote control
Light selection method: With the flashlight on, pressing the front “Mode” button or via wireless remote control
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: NBP100R 10,000mAh rechargeable Li-ion battery pack - can also use 2x 21700 Li-Ion 3.6/3.7V batteries
Measurements: 25.6cm (L) - 2.7cm (D shaft) - 6.5cm (D head) - 2.7cm (D tang)
Weight: 270g. without batteries / 417g. with batteries
Accessories included: Battery pack (NBP100R 10,000mAh), spare O-rings, lanyard, USB-C charging cable, holster, wireless remote switch set (wireless remote switch, hook-and-loop lock, hook-and-loop strap x 2, Picatinny rail mount x 2).
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

LED: 6x UHE LEDs with a life cycle of 50,000 hours
Outputs: 8x bright, digitally adjusted outputs and 2 signaling modes
Spot light powers and durations: 8 lumens (200h.) -> 100 lumens (36h.) -> 400 lumens (14h.) -> 1000 lumens (5h.) -> 1600 lumens (3.30h.) -> Beacon -> SOS
Powers and durations auxiliary red light: 5 lumens (95h.) -> 15 lumens (30h.) -> flashing at 15 lumens
Range: up to 157mt.
Peak power: 6170 candelas
Usable batteries: 1x Nitecore 1840 3.6V (included in package), compatible with any 18650 Li-ion with at least 8A discharge capacity
Flashlight dimensions: 80x42x48.5 mm. 
Weight: 140g (with battery, mounting bracket and elastic band)
Lens: optical matrix
Body: aircraft aluminum
Finish: anodized, Type III
Strap: elastic, breathable, adjustable in diameter

The NITECORE SUMMIT 20000 is a power bank designed to withstand low temperatures, specifically crafted for cold environments. It ensures continuous usage at -40°C (-40°F) and stable output in low-temperature conditions, achieving what seemed impossible.

Equipped with the PI heating system, the SUMMIT 20000 provides high efficiency and high-speed heating performance to ensure the battery operates at an appropriate temperature, reducing power losses. Additionally, the available capacity of the SUMMIT 20000 at -20°C (-4°F) is approximately 70%, while a conventional power bank is either unavailable or has only 10% capacity at this temperature.

The SUMMIT 20000 will automatically activate Low-Temperature Heating Mode when its temperature is below 0°C / 32°F and there is input or output, thanks to integrated intelligent temperature detection modules. Furthermore, the preheating function will be activated when connected to an external power source in low-temperature environments. The SUMMIT 20000 will remain in heating mode during preheating without energy consumption to maintain an appropriate temperature for direct use.

With an increased capacity of 20,000mAh, the SUMMIT 20000 features USB-C and USB-A ports for a maximum output power of 20W and a maximum input of 18W, available with QC and PD charging modes. It comes with various protections, including overcurrent protection, short circuit protection, and over-discharge protection, making it ideal for charging smartphones, flashlights, headphones, and more.

The SUMMIT 20000 is constructed with a seamless monoblock carbon fiber shell to ensure optimal protection during complex outdoor activities. Weighing only 303g / 10.69 oz, it is shock-resistant up to 1.5 meters and has an IPX5 rating, making it resistant to accidental drops in the rain or water splashes.

Key Features:

Ultralight power bank with a capacity of 20,000mAh
Carbon fiber frame and panels
Dual USB-A and USB-C output channels
20W output + 18W input from the USB-C port (PD)
18W output from the USB-A port (QC)
PD and QC 3.0 charging compatibility
LED power level indicator
Low-current charging mode for delicate electronics (e.g., smartwatches, TWS headphones, etc.)
IPX5 waterproof rating
Weighs only 303 grams
Technical Specifications:
Battery: Li-ion
Capacity: 20,000mAh 3.85V (77Wh)
Nominal Energy: 13,500mAh 5V (TYP 2A)
Input: USB-C: 5V⎓2.4A / 9V⎓2A
Output:
USB-C: 5V⎓3A / 9V⎓2.22A / 12V⎓1.68A
USB-A: 5V⎓3A / 9V⎓2A / 12V⎓1.5A
Dual Ports: 5V⎓3A (MAX)
IP Protection Grade: IPX5
Dimensions: 124mm x 60mm x 21.8mm (4.88" x 2.36" x 0.86")
Weight: 303g±5g (10.69 oz±0.1 oz) (Accessories Not Included)
Accessories: USB-C to USB-C Charging Cable, Insulating Bag

TECHNICAL FEATURES:
Led: 2x SST40 LEDs for the main flashlight and 20x CRI >90 warm light (4000K) diodes for the lantern
Operating Modes: 5 light powers for the flashlight and 7 types of lighting for the lantern
Flashlight Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (10h.) -> 300 Lumens (21h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Peak power: 23100 candelas
Maximum lighting distance: 300m.
Powers and Durations White light lantern: 400 Lumens (7h.) -> 55 Lumens (60h.) -> 5 Lumens (200h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Powers and Durations Red light lantern: 10 Lumens (80h.) -> 2 Lumens (260h.) -> S.O.S. -> BEACON
Peak power: 70 candelas
Body: ABS 
Batteries: built-in, rechargeable, non-removable, Li-ion, 10000mAh
Measurements: 11.3cm (H) - 6.0cm (W) - 3.4cm (Thick.)
Weight: 271g.
Accessories included: USB/USB-C charging cable
Waterproofness: as per IP67 standard
Impact resistance: withstands falls from 1m height
Notes: Can be used as an 18W powerbank, compatible with QC (Quick Charge) technology - built-in folding hook for hanging from ceiling

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

WHY CHOOSE IT:

Tactical / military use - High luminous power - Very compact dimensions - Convenience of the integrated recharging system - Wide range light - Practicality and immediacy of the light selection commands. Thanks to Strobo Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2150i, 5,000mAh) included in the package
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide range light with 6580cd central brightness. and maximum range of 158 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
* Tungsten carbide front glass breaker
* Integrated potentiometer with light indicating the remaining charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - in different conditions of use or using different batteries, the data may vary

Led: 4 CREE XP-L2 V6 LEDs with a life cycle of 50,000 hours
Operating Modes: 6, electronically regulated + Strobo
Powers and Durations: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 6580 candles
Maximum illumination distance: 158m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: only works with a 21700 Nitecore "i series" rechargeable battery (NL2150i, 5,000mAh - included in the package). If necessary, it can also work with 2x 3.0V CR123, stopping at 1060 lumens of power
Measurements: 13.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 79.5g. batteries excluded
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. depth for 30min.
Sheath: thermoplastic, rigid, for belt
Impact resistance: withstands drops from 1.5m in height

Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery

WHY CHOOSE:

Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Wide beam light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head.
* Rechargeable NITECORE 21700 battery (NL2150i, 5,000mAh) included in the package.
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide-range light with a central brightness of 12200cd. and a maximum range of 221 meters.
* Glasses and parabolas with anti-reflection treatments, crystal coating and with PDOT (Precision Digital Optics Technology).
* Frontal tungsten carbide glass breaker
* Integrated potentiometer with indicator light showing the remaining battery charge and voltage remaining.
* Constructed of solid aircraft aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LEDs: 4 CREE XP-L2 V6 LEDs with a 50,000 hour life cycle
Operating Modes: 6, electronically controlled + Strobe
Powers and Times: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 12200 candles
Maximum Lighting Distance: 221m
Lighting method: Rear button with "Momentary On" system for light signals and Rear "Mode" button for immediate access to the strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2150i, 5,000mAh - included in the package). If necessary it can also work with 2x CR123 3.0V but stopping at 1060 lumens of power
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 116g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Scabbard: thermoplastic, rigid, belt-mounted
Impact resistance: resists falls from 1.5m height

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

Nitecore FLS360 is a high-power LED floodlight designed to provide bright, uniform lighting up to 360° at 22,000 lumens.

Equipped with 36 CREE XM-L2 LEDs, this floodlight is ideal for industrial applications, outdoor events, and situations that require strong, reliable light without the option of mains power. With a maximum beam distance of 897 meters and a battery life of up to 40 hours, the FLS360 combines high performance with a robust and durable design. Includes rechargeable batteries, a high-intensity output of 201,200 candlepower, and flexible mounting options, making this tool perfect for a wide range of professional uses.

Technical specifications

Brightness and Output Modes:
Turbo: 200W, 22,000 lumens, 3 hours of battery life
High: 75W, 10,000 lumens, 8 hours of battery life
Average: 33W, 5,500 lumens, 18 hours of battery life
Low: 15W, 2,000 lumens, 40 hours of battery life
Battery Capacity: 600 Wh
Battery Voltage: 11.1 V
Charging time: 8 hours
Charger: Input AC 100 ~ 240V, Output DC 15V/19A

Degree of Protection:
Light: IP66
Charger: IP67

Dimensions:
Length: 3.8 m (maximum), 1.02 m (minimum)
Diameter: 0.22 x 1.02 m (0.72 x 3.35 ft)
Weight: 13 kg (28.66 lbs)

Maximum Output: 22,000 lumens
Number of LEDs: 36 CREE XM-L2
Maximum Beam Distance: 897 meters
Beam Intensity: 201,200 candelas
Maximum duration: 40 hours
Rechargeable battery
Construction: Tough and durable
Applications: Industrial, outdoor events, emergencies, military

HUNTING KIT

the set includes:

- Nitecore NEW P30 torch

- RSW3 remote connection

- Magnetic attack

Technical data of the torch

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Charging system integrated in the Li-ion batteries via USB Type C port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Uses a Cree XP-L HI V3 LED for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated + Strobe, S.O.S. and Beacon
Powers and Durations: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Power peak: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear button
Light selection method: Front button
Head: aviation aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: included 1x 21700 with USB Type C direct charging - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head) - 2.72 (D. tail)
Weight: 158g. - batteries excluded
Accessories included: Clip, Wrist strap, Spare O-ring, Spare back button, Adapter for 18650 / CR123 batteries, Sheath
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height

The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery
Capacity: 3400mAh
Voltage: 3.7V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore 
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza