June 2015
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Kershaw - Emerson E-Train Framelock - 6034T - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034TR -
Viper Ten by Fabrizio Silvestrelli - Micarta Burgundy - V5922CBR - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: Canvas Burgundy Handle with GR2 anodized titanium spacer
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922CBR -
Viper Ten by Fabrizio Silvestrelli - Green G10 - V5922GGR - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: G10 Green with spacer titanium GR2 anodized
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922GGR -
Viper Ten by Fabrizio Silvestrelli - Carbon Fiber - V5922FC - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: carbon fiber with titanium spacer GR2 anodized
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922FC -
Maserin - Bulldog Flipper - Design by Sergio Consoli - 403 - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio ConsoliMA-403