Spade, katana, oggetti collezione
-
YariNoHanzo - Tanto Folded - YN210
YariNoHanzo - Tanto Folded - YN210
Blade: AISI 1060 HCS folded (damask) high carbon content
Hamon: Style note
Hi: -
Blade length (without habaki): 23,50cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 5mm.
Kissaki: 4,5cm.
Tsukamaki Length: 11.5cm.
Total length: 40cm.
Weight: 340g.
Balance: advanced, to 1cm
Saya: black painted wood
Handle: same Tsukagawa white with black cotton
Sageo: black cotton
Fuchi and Kashira: Brass
Habaki and Menuki: Brass
Seppa: Brass
Notes: -YN210 -
Marto - Wakizashi Edo Ceremonial 160 - resin - oriental sword
Faithful reproduction of the ceremonial Wakizashi dating back to the Japanese Edo period. Precisely carved and chiseled resin scabbard, tsuba and hilt depicting rural scenes.
Blade: not sharpened in 440 stainless steel
Blade length (including habaki): 50.7cm.
Sori: 2.4cm
Blade thickness: 6mm.
Kissaki: 2.5cm.
Total length: 73cm.
Weight: 832g. (without sheath) - 1324g. (including scabbard)
Balance: advanced, at 1cm
Handle: resin
Sheath: in resinSmall technical glossary: Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Motohaba: height of the habaki blade * Sakihaba: height of the kissaki blade.
MA-160 -
Cold Steel - Daga Medievale in Polipropilene - 92BKD - Training
Rivoluzionaria Daga realizzata in Polipropilene.
Peso, dimensioni e bilanciatura reali per trasmettere il massimo delle sensazioni a chi la impugna, unite però ad una resistenza senza eguali.
Materiale: Polipropilene
Lunghezza Lama: 32 cm
Lunghezza Totale: 50 cm
Lunghezza Elsa: 15 cm
Lunghezza Impugnatura: 11,5 cm
Spessore Lama: 2,2 cm
Peso: 344 gr.CS92BKD -
Cold Steel - Escrima Stick Polipropilene - 91E - Training
Innovativo gladio da allenamento realizzato interamente in Polipropilene.
Peso, dimensioni e bilanciatura reali per trasmettere il massimo delle sensazioni a chi la impugna, unite però ad una resistenza senza eguali.
Materiale: Polipropilene
Lunghezza Lama: - cm
Lunghezza Totale: 81,7 cm
Diam. max: 29 mm
Peso: 442gr.CS91E -
Cold Steel - Wakizashi Bokken in Polipropilene - 92BKKB - spada da allenamento
Rivoluzionario Bokken corto, realizzato in Polipropilene per sostituire i tradizionali e costosissimi Bokken giapponesi in legno.
Peso, dimensioni e bilanciatura reali per trasmettere il massimo delle sensazioni a chi lo impugna, il tutto unito ad una resistenza senza eguali.
Materiale: Polipropilene
L.lama: cm.53 L.tot.: cm.69,2
Peso.: gr.325
Note: dotato di tsuba smontabileCS92BKKB -
Forgotten Dreams - Chaos Dagger - arma in lattice
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada a una mano, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 88cm.
Peso: circa 182g.6919 -
Forgotten Dreams - spada in lattice Chaos Gladius 2nd Edition
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada bastarda, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 60cm.6925 -
Marto - Conan - Father's Sword Collectors Edition - spada fantasy
Riproduzione "Collectors Limited Edition" Marto della spada ufficiale del padre di Conan, tratta dal film "Conan il Barbaro"
Lama in acciaio 440 con impugnatura in cuoio, precisa cesellatura dell'elsa in bronzo con profonde incisioni sulla lama.
Lunghezza lama: 73 cm
Lunghezza totale: 96 cm
Peso: 2.5 kg circa
Corredata di scatola in legno con lacci di cuoio e certificati di autenticità.3217 -
Museum Replicas Windlass - Conan - Father Sword Bronze - 884017 - fantasy sword
Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"
Handcrafted by Windlass Steelcrafts® expert blacksmiths
- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hiltBlade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.
884017 -
United - Sting sword of Bilbo Beggins - The Hobbit - fantasy sword
Sting - Sword of Bilbo Baggins - The Hobbit Version
In the Third Age of Middle-earth, the Hobbit Bilbo Baggins was unexpectedly swept into an epic quest to reclaim the lost Dwarf Kingdom of Erebor, which was long ago conquered by the dragon Smaug. Approached out of the blue by the wizard Gandalf the Grey, Bilbo found himself joining a company of thirteen dwarves led by the legendary warrior, Thorin Oakenshield.
In this harrowing journey Bilbo and his Company of Dwarves came upon a troll lair in Rhûdaur. There they found two Elven swords, Glamdring, and Orcrist, and a knife. Bilbo claimed the knife for himself, and it was more of a sword to someone of his stature. He wielded the sword through most of the quest, famously using it against the Giant Spiders of Mirkwood to save the Company of Dwarves. After Bilbo had slain his first spider he declared, "I will give you a name, and I shall call you Sting."
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. The Sting sword is 22 1/4" overall, featuring a stainless steel blade and, solid metal hilt parts, and an intricately detailed vine adorning the grip. It is presented with a wood wall display featuring graphic motifs from The Hobbit: An Unexpected Journey, and includes a certificate of authenticity.
UC2892 Sting - Sword of Bilbo Baggins
Includes a parchment certificate of authenticity.
Overall Length: 22-1/4"
Blade Length: 15-3/8"
Blade Material: AUS-6 Stainless Steel
Handle Material: Solid Metal Guard and Pommel
Display: Wood with Wood Grain Finish and Silk Screen GraphicUC2892 -
Warlords - Elven War Dagger - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Elven War Dagger
Pugnale elfico, buona bilanciatura ed eccellente controllo
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 47cm.
Peso: circa 171g.6905Special Price €44.26 Regular Price €49.18Only 3 left -
Warlords - Paladin Shield - armi in lattice
Le armi Warlords Collection, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
- Paladin Shield
Imponente, elegante e robusto scudo elfico. Ottime finiture
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: altezza 66cm. x larghezza 57 cm
Peso: circa 700g.6889Special Price €88.52 Regular Price €98.36Only 1 left -
YariNoHanzo - Musashi Wakizashi - YNHR4W - wakizashi
YariNoHanzo - Musashi Wakizashi - YNHR4W - wakizashi
Blade: carbon steel 1060 - Blunt
Hamon: style note, by acid treatment
Hi: -
Blade length: 38.0cm.
Motohaba: 3.cm.
Sakihaba: 2.2cm.
Sori: 1.5cm.
Blade thickness: 7 / 4.5mm.
Kissaki: 4,56cm.
Tsukamaki Length: 11,5cm.
Total length: 57cm.
Weight: 686G.
Balance: advanced to 6cm from tsuba
Saya: black lacquered wood
Tsuka-gawa: black leather of same color white
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki, Menuki, Seppa and Shitodome: Copper
Note: the sword is accompanied by bag in cottonYNHR4W -
United - Guthwine sword of Eomer - The Lord of the Rings - UC3383 - fantasy sword
Éomer was a captain of the king's cavalry, Marshal of the Brand and one of the most powerful warriors of Rohan. He skillfully wielded his royal sword, Gúthwinë especially against Orcs and Uruks of Isengard who dared to trespass on Rohan. He fought bravely alongside King Theoden against the forces of Mordor in the Battle of Helm's Deep and the Fields of Pelennor. In the final battle against the dark lord Sauron, Éomer fought alongside Aragorn with the armies of Rohan and Gondor at the Gates of Mordor.
This authentic and detailed replica is a reproduction of the real prop built by Weta Workshop and used in The Lord of the Rings films presented by New Line Cinema. This 34-inch long sword was made using only the finest materials and craftsmanship available. It features cast metal hilt parts with a brass finish, a genuine leather-covered handle, and a 27-inch stainless steel blade with engraved grooves.
Includes a parchment certificate of authenticity.
Total length: 86.36 cm
Blade length: 68.58 cm
Blade thickness: 0.64 cm
Blade material: 420 J2 stainless steel
Handle: cast metal guard and pommel with antique brass finish with genuine leather covered handle.
Display plate: wall-mounted, for vertical display, made of screen-printed woodThis sword is an official item manufactured by United Cutlery under official delal license from New Line Cinema!
UC3383 -
Tanto - Folded Performance Damascus - YNHR13T - Oriental swords
Production: semi-crafted
Blade: sharpened in high carbon AISI 1060 HCS folded steel (damascus)
Hamon: Noted style
Hi: -
Blade length (without habaki): 26cm.
Motohaba: 2.5cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4.0cm.
Tsukamaki length: 8.5cm.
Total length: 40cm.
Weight: 326g. without scabbard - 448g. with scabbard
Balance: advanced, at 1cm
Saya: black painted wood
Handle: same black with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the handle * Menuki: medallions placed under the handle's cordage * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is tied * Motohaba: height of the blade at habaki * Sakihaba: height of the blade at kissaki.
YNHR13T -
Tanto - DragonFly - YNHR5T - Same white and black cotton - oriental swords
Production: semi-craftmade
Blade: sharpened steel AISI 1060 high carbon content
Blade length (including habaki): 23,50cm.
Motohaba: 2.55cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 2.5cm.
Tsukamaki length: 9cm.
Total lenght: 35,3cm.
Weight: 348g. (without scabbard) - 442g. (including scabbard)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: grip * Tsukamaki: weave on the grip * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps around the grip * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the sleeve * Menuki: medallions placed under the cordage of the sleeve * Habaki: collar that wraps around the beginning of the blade * Seppa: trimmings of the guard * Shitodome: trimmings to which the Sageo is tied * Motohaba: height of the blade at the habaki * Sakihaba: height of the blade at the kissaki.
YNHR5T -
Marto - Ivanhoe's sword - 539 - historical sword
The sword of Ivanhoe, disinherited and exiled by his father Cedric the Saxon for swearing love to Lady Rowena.
The story narrated takes place in England in the year 1194, at the time of King Richard the Lionheart and the Crusades, in conjunction with the controversies that divide the Saxons and the Normans.
The Knight Wilfred of Ivanhoe, son of the Saxon noble Cedric, loves, in return, the young lady Rowena. Cedric contrasts the love between the two, as he has already politically decided to marry Rowena to Athelstane with the aim of returning after a long time, a Saxon lineage to the throne and tries to remove Ivanhoe, friend of the Norman king Riccardo Cuor of Leone.
The young man thus participates in the crusades, following Riccardo. John the Landless in the absence of his brother illegally appropriates the throne. Upon returning from the Crusades, Ivanhoe participates in a tournament in which he manages to win against all the champions affiliated with the usurper. The defeat weighs on the pride of the Norman nobility who will make him prisoner with his father Cedric, Rowena and Athelstane. King Richard with the help of Locksley (Robin Hood), will be able to free them, so that Ivanhoe will be able to marry Lady Rowena.
In some parts of the novel, the way in which hatred and envy are manifested towards Isaac of York and his daughter Rebecca, this denotes the anti-Semitism already present in the period under consideration, far in advance of what it happened in the last century of the twentieth century. (from Wikipedia)
The sword has a steel blade shelled up to the middle and a brass-plated metal hilt with elso arms decorated with two facing lions.
- 420 cm steel blade 82.5 cm
- total length 101 cm
- excellent finishes
- Blade width 6 cmMT-539 -
Museum Replicas Windlass - Black sword - 501176 - Handcrafted Sword
"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "
The Blacksword fantasy sword features a burnished tempered carbon steel blade.
The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp501176 -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651 -
Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger
This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.404335 -
Museum Replicas Windlass - Sword of Robert the Bruce - 501495 - historical sword
Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.Sword characteristics:
- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch501495 -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Windlass - Italian Arming Dagger 403599 - craft dagger
Reproduction of an Italian dagger of the 14th / 15th century.
The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.
Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.
Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.403599 -
Museum Replicas Windlass - Medici Renaissance Dagger 403721 - craft dagger
Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.
The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.
Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.403721 -
Valyrian Steel - Needle - Sword of Arya Stark - Il Trono di Spade - Game of Thrones - spada
La Valyrian Steel Collection è una serie di riproduzioni con licenze ufficiali, di armi presenti nell'universo fantasy creato dai libri best-seller di George R.R. Martin. Ogni singolo prodotto è realizzato con i migliori materiali disponibili e con particolare attenzione alle finiture ed ai dettagli.
Needle - La spada di Arya Stark
Lama: non affilata, in acciaio inox 420J2, lunga 57cm.
Guardia e Pomolo: Metallo color ottone antichizzato
Impugnatura: Pelle
Supporto Espositivo: da muro, in legno
Lunghezza Totale: 77.5cm.
Arya Stark
Arya Stark nacque nel duecentottantanovesimo anno dopo la conquista del Continente Occidentale da parte di Aegon Targaryen; è la seconda figlia femmina di Eddard Stark e Catelyn Tully.
È descritta come una bambina magra ed atletica. Ha ereditato la fisicità degli Stark, avendo un viso allungato, gli occhi grigi e i capelli castani. La sua personalità ricorda inoltre quella della defunta zia paterna, Lyanna.VS0114€319.67Out of stock -
United - The Lord of the Rings - Sting, the sword of Frodo Baggins - UC1264 - fantasy sword
Like all the ancient elven blades, Sting magically shines with a blue light in the presence of Orcs nearby; Gollum, who hates everything that has been done by the Elves (because of the intrinsic charge of purity that Elven objects absorb from their creators), is afraid of Sting.
This has helped Bilbo in his confrontation with Gollum under the mountain in The Hobbit and, later, also Frodo thanks to the terror that the blade inspired to Gollum, has managed to tame it (temporarily) in The Lord of the Rings.
Sting has the ability to easily cut spider webs since it was probably created for this need by its creators of Gondolin, at that time there were in fact numerous spiders for the woods around it and it was therefore more convenient to have a sword or dagger to use rather than a big sword. This blade is of absolute terror for Shelob and all spiders in general grown in the darkness.
This finely detailed replica is a 1: 1 scale reproduction of the sword used for filming the "Lord of the Rings" trilogy.
Blade: 420J2 stainless steel, engraved
Handle: painted wood
Knob: antique metal
Guard: engraved antique metal
Blade length: 39cm.
Total length: 57cm.
Support: wooden wall display; hooks and screws for mounting included
Packaging: cardboard box with "The Lord of The Rings" logos and certificate of authenticity with movie licensesUC1264 -
United - Blade DayWalker Stakes UC1431 con supporto - spada fantasy
Dotata di licenze ufficiali Marvel, l'esatta replica degli stakes utilizzata da Wesley Snipes nella trilogia dei film Blade
specifiche tecniche:
Include tre pali, guaina e display.
Lunghezza totale: 27 cm ciascuno
Materiale: alluminio lavorato lucidato a specchio, tappo terminale amovibile.
Fodero: regolabile, in vera pelle, nylon e piastre in acciaio inox con bordi smussati, elastico nero con chiusura in velcro, può essere fissato a una gamba o applicato al display.
Display: in legnoThe Marvel Comics character is personified on the big screen in the half-human, halfvampire character, Blade, played by Wesley Snipes, who is the result of a vampire attack on his mother before he was born. Possessing all the strengths of vampires but none of their weaknesses, his world is filled with the vampires he hates, and his quest in life and purpose for living is to rid the world of them - wherever he can find them. With the New Line Cinema releases of Blade,™ Blade2,™ and Blade: Trinity™ (in theaters December 8, 2004), United Cutlery has released a series of Blade™ Collectibles: DayWalker Stakes (UC1431), the Sword of the DayWalker (UC1401), the DayWalker Scabbard (UC1403), and the Glaive (UC1402). Each sold separately.
The Blade DayWalker Stakes are licensed reproductions of the props prominently featured in the Blade™ film. United Cutlery Brands, industry leader in fine movie knife and sword reproductions, has meticulously recreated the actual prop stakes, using the finest grade materials and craftsmanship of the highest quality available. The stakes are crafted of mirror-polished machined aluminum with a removable end cap. Includes a leather, nylon, and stainless steel sheath that holds all three stakes. Sheath can be worn around a leg or shown on the versatile wood display.
Specifications:
Includes three stakes, sheath, and display.
Overall length: 10-1/2" each
Stake Material: Mirror-polished machined aluminum, removable end cap.
Sheath: Adjustable, genuine leather, nylon, & stainless steel plates with chamfered edges, black elastic with velcro closure, can be worn around a leg or shown on the display.
Display: 9-5/8" x 7-3/4" x 3/4" wood, logo medallion, can be displayed on a table or mounted to a wall, includes mounting hardware, instructions.UC1431 -
United - The Lord of The Rings - Pungolo, la spada di Frodo Baggins - UC1424 - Museum Collection Limited Edition
United Cutlery UC1424 LOTR™ Museum Collection Sting™ in edizione numerata a tiratura limitata
Questa replica finemente dettagliata è la versione "Museum Collection" di United che si differenzia per l'aspetto "vissuto" di lama, guardia e pomolo; per i materiali utilizzati di altissimo livello e per la lama realizzata in acciaio al carbonio, come una vera spada da utilizzo concreto. La spada ha pesi e bilanciature ottimali per essere brandita.
Benché per gli standard di uomini ed elfi sia da considerarsi una sorta di daga, per un Hobbit si può considerare una spada a tutti gli effetti. Bilbo diede Pungolo a Frodo, poco prima della partenza della Compagnia dell'Anello da Gran Burrone. Dopo la sconfitta di Sauron alla fine della Terza Era, Frodo la donò a Samvise Gamgee.
Il nome "Pungolo" venne dato alla spada da Bilbo dopo il suo combattimento coi Ragni Giganti di Bosco Atro, nelle prime versioni però il nome dato alla spada è "pungiglione".
Come tutte le antiche lame elfiche, Pungolo risplende magicamente di una luce azzurrina in caso di presenza di Orchi nelle vicinanze; Gollum, che detesta tutto ciò che è stato fatto dagli Elfi (a causa dell'intrinseca carica di purezza che gli oggetti elfici assorbono dai loro creatori), ha paura di Pungolo. Questo ha aiutato Bilbo nel suo confronto con Gollum sotto la montagna ne Lo Hobbit e, successivamente, anche Frodo grazie al terrore che la lama ispirava a Gollum, è riuscito a domarlo (temporaneamente) ne Il Signore degli Anelli. Pungolo ha la capacità di tagliare facilmente le tele di ragno visto che con ogni probabilità era stato creato proprio per questa necessità da suoi creatori di Gondolin, a quel tempo infatti vi erano numerosi ragni per i boschi lì attorno e risultava quindi più comodo avere uno spadino o pugnale da usare piuttosto che una grande spada. Questa lama è di assoluto terrore per Shelob e tutti i ragni in generale cresciuti nell'oscurità.
Lama: acciaio al carbonio, con numero di serie inciso sulla lama
Impugnatura: in legno massiccio con dettagli in foglia d'argento
Pomolo: metallo anticato placcato in argento
Guardia: metallo anticato placcato in argento
Lunghezza lama: 37cm.
Lunghezza totale: 50cm.
Supporto: vetrina da parete o da appoggio realizzata in legno massiccio con numero di serie ed angoli in ottone placcato, spesso vetro smussato, serratura con chiave rimovibile e grafica stampata a colori nella parte inferiore del display.
Confezione: scatola di cartone con loghi "The Lord of The Rings" e certificato di autenticità con licenze cinematografiche
Note: Edizione a tiratura limitata e numerata, sia su lama che su espositore, realizzata in soli 3000 esemplariUC1424 -
United - Herugrim The sword of King Theoden UC1370 - Il Signore degli Anelli - spada fantasy
La spada di Re Theoden tratta dal film “Il Signore degli Anelli”
- Lama in acciaio inox 420 non affilata di cm 96
- Lunghezza totale cm 70
- Impugnatura in metallo solido con finitura in pregiato cuoio.
- Certificato di autenticità presente nella confezione
- Supporto in legno
King Theoden, courageous soldier and leader of the land of Rohan, fell under the power of the wizard Saruman through the slithering machinations of his servant Grima. Only through the intervention of Gandalf the White was Theoden exorcised of Sarumans corrupting influence. Gandalf said to Theoden, "Your fingers would remember their old strength better if they grasped your sword," and at that moment Theodens mind cleared, his authority as king returned to him, and his great sword, Herugrim was once more returned to his grasp. Theoden went on to lead the defense of Helms Deep and the charge of the Rohirrim to the aid of Gondor and against the hordes of the enemy that assailed the White City. The hope of all Men and Free Peoples then lay in the defense of Minas Tirith.
UC-1370ABNB Herugrim™ - The Sword of King Theoden™
Includes a parchment certificate of authenticity.
Overall Length: 36-1/2"
Blade Length: 27-1/2"
Blade Thickness: 1/4"
Blade Material: Tempered 420 J2 stainless steel, false-edged.
Handle Material: Solid metal guard and pommel with antiqued brass plated finish, the hilts are east in the symbols of the famed horses of Rohan and the grip is genuine leather-wrapped, rat-tail tang construction.
Plaque: 11" x 10-1/2" x 3/4" wood with a silkscreened design. Hardware, instructions included.UC1370 -
United - The sword of Boromir UC1400 - Il Signore degli Anelli - spada fantasy
La spada di Boromir tratta dal film “Il Signore degli Anelli”
- Lama in acciaio inox 420 non affilata di cm 76
- Lunghezza totale cm 105
- Impugnatura in metallo solido con finitura in pregiato cuoio.
- Certificato di autenticità presente nella confezione
- Supporto in legno
The blade's flattened diamond shape and equally wide fuller reduced weight, yet retained strength in the end of the blade by stopping just short of the tip. It was equally effective for slashing against lightly armored opponents and for thrusting into more heavily protected enemies. The guard, similar to that of his father's sword, showed a warrior's flourish in that it was formed from a square-edged piece of steel that had been twisted before being curved into a crescent. The handgrip was wide like the blade, and the pommel was an elegant and simple piece of steel that added weight to balance the blade.
UC-1400 Sword of Boromir™
Includes a parchment certificate of authenticity.
Overall Length: 39"
Blade Length: 30-3/16"
Blade Thickness: 1/4"
Blade Material: Tempered, 420 J2 stainless steel with a fuller grind, false-edged.
Handle Material: Solid metal guard and pommel, antique metal finish, genuine leatherwrapped grip, tapered tang construction.
Plaque: 12-1/8" x 13-3/8" x 3/4" wood, silkscreened design. Hardware, instructions included.UC1400 -
Museum Replicas Windlass - Damascus Viking Sword 500262 - Viking sword
Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.
Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -500262 -
Museum Replicas Windlass - Viking Sword 501472 - sword
Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -501472 -
Tanto - Kunishi - YNH227 - Japanese sword
Blade: AISI 1060 high-carbon steel
Blade length (including habaki): 23,50cm.
Motohaba: 2.65cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 4,5cm.
Tsukamaki length: 13.5cm.
Total Length: 37.8cm.
Weight: 346g. (without sheath) - 434g. (including sheath)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with tsukagawa in black cotton
Sageo: black cotton
Fuchi and Kashira: in brass
Habaki and Menuki: in brass
Seppa: Brass
Notes: -Small technical glossary: Hamon: blade hardening line * Hi: deep groove in the blade, also called colander * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather that wraps the handle * Tsuba: guard * Fucks: ornaments between guard and manicure * Kashira: ornament at the end of the mitt * Menuki: medallions placed under the jumper of the mitt * Habaki: collar banding the beginning of blade * Seppa: guard gaskets * Shitodome: gaskets to which the Sageo is attached * Motohaba: foam height to the foam * Sakihaba: knife height to the kissaki.
YNH227 -
Hanwei - Shaolin Jian Tai Chi - SH2442 - Chinese sword
The renowned Chinese Shaolin temple is a place where martial arts exceed their limits also grace the profound union with the Zen Buddhism. Hanwei, with this sword authorized directly from the Shaolin Temple, wants to join the Zen philosophy with the physicality of the forms of Kung Fu Jian embracing the spirit of Shaolin and their traditions in a timeless design: simple but elegant
Blade: steel 1050 high carbon content not sharpened
Total length: 98.5cm.
Blade length: 77cm.
Blade thickness: 5mm.all'elsa; 1mm. toe
Handle length: 10.5cm.
Sword Weight: 510g.
Sheath: bamboo wood and brass
Handle: bamboo wood and brassSH2442€426.23Out of stock -
Museum Replicas Windlass - The Accolade Knight Templar sword 50235
Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt502356 -
Museum Replicas Windlass - Battle Sword in a hand 501000 - battle ready
- Battle Sword in a hand 501000 - battle ready
Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch501000 -
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.
Each blade is built to withstand a lot of use by reenactors or stage performers.
Full tang sword forged of high carbon steel 1095, fully tempered.
The edges and points are 3/16" thick and rounded over for better nick resistance.
Wood grips covered with leather and other authentic materials.
All come with scabbards.
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch501002 -
United - Fighting Knives of Legolas Greenleaf - UC1372 - spade Lord of the rings
United to the happiness of many fans, has re-proposed reproductions of the beautiful elven daggers of Legolas. Sold in pairs with the wooden display stand, the dagger blades measure 40 cm and have a maximum thickness of 5 mm;
total length 57 cm.
Weight each 438 g.
UC1372 -
Marto - Giulio Cesare's Gladio - Limited Edition - AC0300 - historical sword
Julius Caesar, Gaius Julious Caesar (101 b.C. – 44 b.C.) was the greatest soldier and political leader of ancient Roma.
During his lifetime the frontiers of the empire were pushed forward and secured; Rome was transformed from a republic into a government with a single ruler, and Caesar was its first dictator. He wrote some of the finest works of history in Latin, describing the campaigns he fought in Gaul and the Civil Wars; he was an architect, a mathematician, and one of the ancient’s world orators.
There is no doubt that Caesar was ambitious and that he enjoyed the great power placed in his hands. It is said that he wished to be crowned king. This was the reason that the conspirators led by Cassius and Brutus gave for his murder: Caesar has become too powerful and danger for the survival of the Republic.LIMITED EDITION
- • Special finish with damasquinado decorations.
- • Inox AISI 420 Blade.
- • Acid etching in black and gold.
- • Overall: 71 cm
- • Weight: 1,8 kg
High Quality Sword of the exclusive Collection "Heroes and Civilizations" made by Marto.
Certificate of Origin and Quality, "Made in Toledo" (Spain).12444 -
United - Hobbit Sword of Thranduil UC3042 - The Hobbit
United - Hobbit Sword of Thranduil UC3042 - The Hobbit
Father to Legolas Greenleaf, Thranduil is a powerful Elf-Lord and a legendary fighter. King of the Woodland Realm, he rules over the northern lands of the great forest known as Mirkwood.
The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel.
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.
The Design of the Sword of Thranduil:
This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil. Includes a certificate of authenticity.
UC3042 Sword of Thranduil
Includes a parchment certificate of authenticity.
Overall Length: 41-7/8"
Blade Length: 30-3/4"
Highly Detailed Stainless Steel Blade
Authentically Detailed Metal Hilt and Parts
Presented with Wood Wall Mount DisplayUC3042 -
United - Hobbit Fighting Knives of Tauriel UC3044 - The Hobbit
Tauriel is a Silvan Elf and daughter of Mirkwood. Her parents were killed by orcs when she was younger and it is hinted that Thranduil looked after her since then. She is a very young elf, around the age of 600, and is insightful into the changing nature of Middle Earth, recognizing the growing evils of the world and the need to eradicate them rather than withdraw into the safety of the elven fortress.
A favorite of King Thranduil and Captain of his Woodland Elven Guard, Tauriel is highly effective and lethal in combat, and primarily employs a reflex bow and two daggers in battle. She is also shown to possess medical knowledge, being able to treat wounds from poisoned weapons. As a native of the woodland realm, she is also a capable tree-climber and an adept leader.
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. All officially licensed United Cutlery replicas feature the film logo and copyright notice laser engraved on the blade and are accompanied by a certificate of authenticity.
The Design of the Fighting Knives of Tauriel:
As Captain of the Woodland Guard, Tauriel carries signature twin daggers with blades forged of a bronzed alloy and a Silvan steel edge of superior strength. The hilts are crafted from greenwood with bronzed steel fittings. This replica is crafted of stainless steel with cast metal and polycarbonate handles, precisely detailed and colored to exactly match the movie prop. It is presented with a wood wall mount featuring graphic motif of Tauriel. Includes a certificate of authenticity.
UC3044 Fighting Knives of Tauriel
Includes a parchment certificate of authenticity.
Overall Length: 20-1/2"
Blade Length: 13-7/16"
Stainless Steel Blades with Cast Metal & Polycarbonate Handles
Wall Mount Display with Graphic Motif of TaurielUC3044 -
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Guard and pommel are made of steel.
Sheath, including the sword, a leather belt with.
- Overall length: 103cm
- Length of the blade: 86,5cm
- Blade width: 4.8 cm
- Weight: 1260 gr
501226 -
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr501423 -
Museum Replicas Windlass - The Eagle - Sword of Marcus Aquila - Gladio - products from films
Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.
Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios888005 -
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather100342 -
Gladius - Dracula's sword - fantasy sword
Fantasy sword
Blade: stainless steel
Handle: in leather
Knob: metal
Guard: metal
Sheath: -
Blade length: 90m.
Handle length: 11cm.
Total length: 124cm.
Blade thickness: 4mm.
Weight: 2396g.GL-DRA€131.15Only -99 leftOut of stock -
Valyrian Steel - Robb Stark's Sword - A Game of Thrones - Game of Thrones - sword fantasy
Lord of Winterfell and now King in the North, Robb has always been aware of the responsibilities that come with his title. As commander of the Northern army, he wages war to avenge his father's death, bring his sisters home, and restore the North's ancient independence. His direwolf is named Grey Wind. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces. It includes a display plaque and a certificate of authenticity.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica sword is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 41"
Blade Length: 33"
Blade Material: 1060 High Carbon Steel
Hilt: Imitation Rayskin with Antique Brass Handle Parts
Blade Construction: Unsharpened, full tang
Plaque: Silkscreened wood with Direwolf sigil10479€290.98Out of stock -
United - Morgul Blade, The Blade Of The UC2990 Nazgul - The Hobbit - fantasy sword
United - Morgul Blade, The Blade Of The UC2990 Nazgul - The Hobbit - fantasy sword
The Nazgûl, the Ringwraiths (in English Ring-Wraiths), also known as the Knights Blacks or Wing Riders, are the characters of Arda, the fictional universe created by JRR Tolkien: it is nine evil specters subject to Sauron.- Blade Length: 455 mm
- Total length: 620 mm
- Blade Thickness: 5 mm
- Handle: Solid metal covered with fine leather.
- Blade guard and pommel antique
- Weight: 800gWooden support
Official product of New Line Cinema with certificate of authenticityUC2990 -
United - Sword of Fili the Dwarf - The Hobbit - Fantasy Sword
Authentic 1:1 scale reproduction, accompanied by official movie licenses, the sword used by the dwarf Fili in the film trilogy "The Hobbit" by JRR Tolkien Directed by Peter Jackson.
Blade: AUS-6 stainless steel antiqued, not sharp
Blade Length: 45cm
Blade Thickness: 9mm
Handle: Resin, with guard, inserts and steel knob antique
Total Length: 65cm
Weight: 2080g
Support: exhibitor wooden wall
Notes: Accompanied by a certificate of authenticity from United and movie licenses New Line Pictures10172 -
United - Sword of Kili the Dwarf - The Hobbit - Fantasy Sword
Authentic 1:1 scale reproduction, accompanied by official movie licenses, the sword used by the dwarf Kili in the film trilogy "The Hobbit" by JRR Tolkien Directed by Peter Jackson.
Blade: AUS-6 stainless steel antiqued, not sharp
Blade Length: 52cm
Blade Thickness: 11mm
Handle: red suede leather, with steel guard and pommel antique
Total Length: 72cm
Weight: 2445g
Support: exhibitor wooden wall
Notes: Accompanied by a certificate of authenticity from United and movie licenses New Line Pictures10171 -
United - Uruk-Hai Sword - The Lord of the Rings
Official reproduction, with guarantee certificates and licenses from New Line Cinema, this is the Uruk-Hai sword used filming "The Lord of the Rings" trilogy directed by Peter Jackson. Blade : 420HC stainless steel aged, blunt Handle : suede leather Blade length : 63cm Total length : 81cm Notes: : Wooden shield with symbols of the White Hand of Saruman3102 -
United - Orcrist - Thorin Oakenshield Sword - UC2928 - The Hobbit - fantasy sword
Authentic 1: 1 scale reproduction, accompanied by official film licenses, of the sword used by the dwarf Thorin Oakenshield and the Elf Legolas in the film trilogy of "The Hobbit" by J.R.R. Tolkien directed by Peter Jackson.
Blade: 420 stainless steel, not sharp
Blade length: 74cm
Blade thickness: 4mm
Handle: n plastic material with antiqued guard and knob and Elvish engravings
Total length: 98cm
Weight: 1445g
Support: wooden wall display
Notes: Accompanied by United Certificate of Authenticity and New Line Pictures film licenses
Thorin was born in the year 2746 of the Third Era (T.E.), son of Thráin II and grandson of King Thrór, and heir to the title of King under the Mountain in Erebor. He also had two younger brothers, Frerin and Dís. In the year 2770, the Dragon Smaug, attracted by the wealth of the kingdom of Erebor, attacked him violently. The Dwarves, struck by surprise, were literally outclassed by the strength and powers of Smaug who, in a short time, managed to conquer the whole kingdom, conquer its spoils, and forced Thorin and his people to abandon their home. A few years later, the ogre Azog the Defiler began the battle of Azanulbizar (2799) at Nanduhirion at the Eastern Gate of Moria.On this occasion, Thorin's shield was shattered and he used his ax to cut an oak branch using it as a shield, thus earning the epithet "Oakenshield". Thanks to Thorin's bravery, the enemy troops were driven back and the dwarf army was able to triumph.
After this last battle, Thorin led his people to the Blue Mountains, west of Eriador.
After the death of his father in 2841, Thorin became the new leader of his people and began to prepare a plan to be able to retake Erebor and kill Smaug.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali10469 -
United - God of War - BladeFlex - Kratos Blade of Chaos - Spada Larp - UC2715
Le armi LARP sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo dal vivo. Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato. Riproduzione ufficiale con licenze Sony e Playstation di una delle Spade del Chaos di Kratos, in scala 1:1, dei videogames "God of War" Materiali: struttura interna tubolare in fibra di vetro Rivestimento: schiuma poliuretanica BladeFlex ad altissima densità Verniciatura: polimeri elastici, dipinta a mano Lunghezza totale: 53cm. Peso: 135g10033 -
Museum Replicas Windlass - Spada della Terza Crociata
La Terza Crociata senza dubbio la pi famosa delle spedizioni in Terra Santa.
Infatti insanguin le terre d'Oltremare dal 1187 al 1192 e sanc la pi violenta collisione tra la guerra santa dei cristiani e la jihad dei musulmani. Tra epiche battaglie e autentici massacri, rivalit intestine e clamorosi errori strategici, and in scena lo scontro tra due figure leggendarie: Riccardo I d'Inghilterra e il sultano curdo Saladino, due nobili guerrieri che combatterono fino all'ultimo respiro una guerra scatenata per cause non sempre nobili. Ancora oggi quel conflitto non cessa di influenzare la storia dell'Occidente e quella del mondo islamico.
Guardia e pomolo sono realizzati in acciaio satinato ed anticato; l'impugnatura in legno ricoperto da morbida pelle nera cucita a mano; la lama, ottimamente bilanciata e temprata realizzata in acciaio ad alto tenore di carbonio: pu quindi flettere per assorbire colpi in tutta sicurezza ed adatta ad essere maneggiata per praticare forme. La spada inoltre accompagnata da un fodero realizzato in cuoio e cucito a mano ed acciaio satinato.
Dimensioni: Lunghezza totale 99cm. - dimensioni lama 82x5cm. - Peso 1130g.5399 -
Citadel - Japanese Aikuchi - Special Salamander - Handmade knife
Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-ASAL -
Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife
These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.
Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.3951 -
Citadel - Japanese O-Kibati Big - handmade knife
Type of production: Artisan
Country of production: Cambodia
Blade: in DNH7 carbon steel hand-forged with clay-selective hardening with 60 / 40HRC tempering
Habaki: in bronze
Tsuka: Magnolia wood and water buffalo horn, removable
Saya: Magnolia wood and water buffalo horn
Blade length: 175mm. (including habaki)
Total length: 278mm. (295mm. With scabbard)
Weight: 224g. without scabbard (306g. with scabbard)Note: Since these are handmade knives and differ slightly in finishes from one another, the product you ordered may not be identical to the one represented in the images but may have minor color differences.
CI-OKIB -
Citadel - Japanese O-Kibati Small - coltello artigianale
Splendido O-Kibati con lama forgiata a mano in carbone con tempra differenziata all'argilla; montatura shirasaya in legno di magnolia e corno di bufalo, realizzato interamente a mano.
Lama: Acciaio DNH7 ad alto tenore di carbonio forgiato a mano a tempra differenziata
Hi: Assente
Habaki: Bronzo
Tsuka: Legno di magnolia
Saya: Legno di magnolia
Lunghezza lama: 125 mm.
Lunghezza totale: 240 mm
Peso: 140 g.
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.CI-OKIS -
Citadel - Mitsubati - 420 - coltello artigianale
Splendido Mitsubati con lama forgiata a mano in carbone con tempra differenziata all'argilla; montatura shirasaya in legno e corno di bufalo, realizzato interamente a mano.
Lama: Acciaio DNH7 ad alto tenore di carbonio forgiato a mano a tempra differenziata 60/40 HRC
Hi: Assente
Habaki: Bronzo
Tsuka: Legno
Saya: Legno
Lunghezza lama: 75mm.
Lunghezza totale: 160mm.
Peso: 70g.3914 -
Citadel - Tanto Luxe Inciso - 130 - craft knife
These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.Small technical glossary: Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade
CI-TA-B -
Eragon - The Sword of Durza - spada
Dalla penna del giovane Christofer Paolini prende vita Eragorn, primo capito di una trilogia fantasy di grande successo di critica e pubblico.
Un ragazzo. Un drago. Un mondo di avventure. Quando Eragon trova una liscia pietra blu nella foresta è convinto che gli sia toccata una grande fortuna: potrà venderla e nutrire la sua famiglia per tutto l'inverno. Ma la pietra in realtà è un uovo. Quando si schiude rivelando il suo straordinario contenuto, un cucciolo di drago, Eragon scopre che gli è toccata in sorte un'eredità antica come l'Impero. Forte di una spada magica e dei consigli di un vecchio cantastorie, dovrà cavarsela in un universo denso di magia, mistero e insidie, imparare a distinguere l'amico dal nemico, dimostrare di essere il degno erede dei Cavalieri dei Draghi.
Questa replica di 79cm propone una lama forgiata in acciaio inox; la guardia e il pomolo sono in metallo; l'ìimpugnatura è in simil osso.
La spada è venduta con un espositore da parete in legno, un certificato di autenticità ed un fodero in cuoio con attacchi regolabili.
Attenzione alle imitazioni: questo prodotto è accompagnato da licenze cinematografiche 20th Century Fox Corporation6103€172.13Only -99 leftOut of stock -
Forgotten Dreams - Chaos Snake Sword - spada in lattice
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada a una mano, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 88cm.
Peso: circa 182g.6918 -
Forgotten Dreams - spada in lattice Elven Tanto
Le armi Forgotten Dreams, sono delle realistiche riproduzioni di spade, pugnali, martelli, asce e scudi realizzate in lattice e perfette per simulazioni di combattimenti o per giocatori di ruolo da vivo.
Robuste e bilanciate, queste armi realizzate con materiali di altissima qualità, rientrano a pieno titolo tra le migliori presenti sul mercato.
Robusta spada bastarda, bilanciata e maneggevole
- Caratteristiche
materiali: tubo in fibra di carbonio rivestito con schiuma poliuretanica ad alta densita
Lunghezza Totale: 60cm.6931 -
Forgotten Realms - Drizzt Do' Urden - Twinkle Sword - spada fantasy
La Storia:
Protagonista della serie di romanzi scritti da R.A. Salvatore ed editi da Armenia, Drizzt Do' Urden è un elfo scuro o Drow, dallequalità d’animo completamente opposte rispetto a quelle del resto dei suoi simili che vive nel sottosuolo dei ForgottenRealms, nella città di Menzoberranzan.
Come ogni nobile elfo scuro della sua città nativa, Drizzt riceve l’addestramento più adeguato alle propriecaratteristiche psichiche e fisiche; nel suo caso, grazie ad una straordinaria agilità e alla sua ambidestria sarà suo padre, Zaknafein, il migliormaestro d’armi di tutta Menzoberranzan, ad istruirlo nell’arte del combattimento con le sue amate scimitarre Twinkle e Icingdeath.
Ancora più importante sarà il ruolo che avrà Zaknafein nella formazione mentale di Drizzt: infatti, quasicertamente grazie a fattori sanguigni, egli è una mosca bianca nell’oscurità dell’underdark. La sintonia che sisvilupperà tra i due, li porterà a conoscersi sempre più profondamente e metterà Drizzt davanti ad una scelta:restare a Menzoberranzan e vivere sotto ai crudeli voleri della Matrona Madre (scelta che a suo tempo aveva fattoZaknafein), fuggire e vivere da reietto nel buio profondo oppure conquistarsi un posto sulla terra, sotto i raggi del sole.
Dettaglio Prodotto:
La lama, con incisioni elfiche oscure, è realizzata in acciaio al carbonio full tang con impugnatura in legno e corda ricoperte in cuoio. Guardia e pomolo sono in acciaio ed in quest'ultimo vi è incastonato uno Zaffiro artificiale. Il fodero, compreso con la spada, è in cuoio. Sono inoltre compresi i certificati di garanzia e di autenticità che comprovano che questa sia l'unica versione ufficiale della spada disegnata da Todd Lockwood ed utilizzata da R.A. Salvatore nei suoi romanzi. Lunghezza totale: 94cm - Lunghezza della lama: 75cm5385 -
Marto - Alexander - Falcata Greca di Alessandro Magno
Destinazione d'uso: Esposizione
Tipo di produzione: industriale
Lama: in acciaio inox 420
Trattamento Lama: -
Produzione Lama: Spagna
Manicatura: Bronzo e Resina simil avorio
Lunghezza lama: 460mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 595mm.
Bilanciatura: -
Peso: 1585g.
Chiusura: -
Clip: -
Fodero: -
Note: Prodotto con licenze ufficiali tratto dal film Alexander; Davis-Anderson Corp.3234