Knife - Essential Tool for Camping, Outdoor Adventure and collection

Carbon is Opinel's original steel. The N°08 Forge features a rough blade forged from carbon steel that provides excellent cutting quality. The blade is ground only on the underside, thus giving a hammered look to the top that gives even more character to this pocket knife.  The oiled ebony handle is carved with irregular facets. Limited edition of 6,000 pieces.

Type of production: industrial
Country of manufacture: France
Blade: carbon steel, with rough forged "brut de forge" blade
Handle: ebony wood, faceted and oiled
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc with PVD Black treatment both when open, and when closed
Notes: Limited Edition 2024 in only 6000 pieces

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Commercially available: unique handcrafted piece
* Sharpening: original
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: -
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Handcrafted
Blade production: Italy
Blade: C70 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 125mm.
Blade thickness: 3mm.
Closed length: 155mm.
Total length: 280mm.
Thickness when closed: 19mm
Balance: -
Weight: 105g.
Closure: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Morittu
Notes: -

Nino Morittu - Knifemaker from Silanus, Province of Nuoro

Nino Morittu creates unique knives, pieces of rare artisanal beauty designed, drawn and finished personally. Each knife is a masterpiece of exceptional craftsmanship, demonstrating his skill in the art of knifemaking. His works, regularly exhibited at various knife shows, have gained wide recognition from collectors and amateurs alike. Morittu prefers the use of C70 type steels and does not produce in large quantities, keeping each piece exclusive thanks to his meticulous artisanal method.

The precision in the details makes his knives almost perfect, testifying to a deep love for work well done. Aesthetically superb, they represent excellent craftsmanship and a passion for quality materials. Morittu's creations are exhibited in internationally renowned museums such as Albacete in Spain, Montreal in Canada, as well as in the United States and Berlin, Germany.

Renowned for his perfectionism, Morittu is often compared to Calaresu, another master knifemaker known for his attention to detail. A distinctive feature of his work is the exclusive use of "paired" horns for the handles, ensuring that there are never any visual disparities between the scales.

Blade: Full tang carbon steel
Conformation: Dui Chirra
Kauri: covered
Aunlo-Bal: -
Handle: wood
Blade length: 310mm.
Blade thickness: 6.5mm.
Total length: 435mm.
Karda: -
Chakmak: -
Weight: 760g.
Sheath: in wood and leather
Notes: Original Nepalese knife entirely handmade

aikuchi

processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmade

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Glock - 78 Field Knife - Olive - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

With saw on the back of the blade.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath

Kukri Artisan - Dhankute Silver - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo 
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Laguiole en Aubrac - Cognet in horn tip - craft knife

Destination: Knife regional French handmade.

This knife is produced by one of the companies aThiers knives oldest in France

Blade: carbon steel.
Handle: horn tip
Blade length: 10 mm.
Blade thickness: 3 mm.
Overall length: 226 mm.
Weight: 54 g.
Folders: Stainless Steel
Head: Stainless Steel
Closing: no lock blade
Clip: None
Sheath: None

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri - World War II Gurkha

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.

New version, equipped with a Nylon blade serrated sheath on the back

Intended use: machete

Type of production: industrial
Blade: 1050 carbon steel
Lama production: South Africa
Handle: PVC
Blade length: 610mm.
Blade thickness: 2mm.
Length closed: -
Total length: 755mm.
Balancing: advanced, at 23cm. from the handle
Weight: 560g.
Closing: -
Clip: -
Sheath: in nylon
Note: -

Manufacturer: Fox - Italy
total length: 31 cm
Blade length: 18.5 cm
Weight: 285 gr
type steel: C70 carbon oxide
handle material: polymer
notes: bag included

Glock - 78 Field Knife - Sand - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Glock - 78 Field Knife - Black - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

Kukri - Nepal Police

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: legno
Lunghezza lama: 225 mm.
Spessore della lama: 10 mm.
Lunghezza totale: 355 mm.
Peso: senza fodero g. 524 - con fodero g. 666
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Coperto
Aunlo-Bal: Motivi incisi neri e dorati con una stella a 5 punte
Manicatura: corno
Finiture: Ottone
Lunghezza lama: 325 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 470 mm.
Karda: 115 mm.
Chakmak: 115 mm.
Peso: 562g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano

Kukri - Operation Iraqi Freedom

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Lama: Acciaio al carbonio completamente incisa con motivi di draghi (attenzione: possono variare rispetto a quanto visualizzato in foto)
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: -
Manicatura: Legno inciso
Finiture: Ottone
Lunghezza lama: 455 mm.
Spessore della lama: 12 mm.
Lunghezza totale: 630 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Peso: 1275g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Conformation: Dui Chirra
Kauri: Uncovered
Handle: Wood
Finishes: Brass
Blade length: 460 mm.
Blade thickness: 13 mm.
Total length: 655 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Type of production: Artisan
Country of production: Cambodia
Blade: in DNH7 carbon steel hand-forged with clay-selective hardening with 60 / 40HRC tempering
Habaki: in bronze
Tsuka: Magnolia wood and water buffalo horn, removable
Saya: Magnolia wood and water buffalo horn
Blade length: 175mm. (including habaki)
Total length: 278mm. (295mm. With scabbard)
Weight: 224g. without scabbard (306g. with scabbard)

Note: Since these are handmade knives and differ slightly in finishes from one another, the product you ordered may not be identical to the one represented in the images but may have minor color differences.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.

Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade