Knife - Essential Tool for Camping, Outdoor Adventure and collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Provenance: 2008 knife acquired from a private seller, previously purchased
* Condition: Overall in excellent mechanical condition and good cosmetic condition; has a few small spots of oxidation on the carbon steel blade and some minor signs of wear on the guard and handle
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Small spots of oxidation
* Marks on the handle: A few minor signs of wear on the guard and handle
* Box: Sold in a nylon pouch with a zipper and embroidered manufacturer’s logos
* Sheath: Included and in excellent condition
* Manuals, Certificates, and Warranties: Warranty certificate with technical specifications and date of manufacture
* Inspected and certified by our in-house laboratory

Intended use: Collectible/sporting

Production type: Handcrafted
Country of origin: Cambodia
Blade: DNH7 carbon steel, selectively hardened to 40/60 HRC
Blade finish: Polished, with brut de forge sections
Handle: Buffalo horn
Blade length: approximately 135 mm.
Blade thickness: approximately 5.5 mm.
Overall length: approximately 247 mm.
Weight: approximately 178 g.
Lock: set back 1.5 cm
Sheath: leather
Notes: Previously purchased knife, from a private collection

Tactical, dynamic, lightning-fast! With the Böker Plus Fafo, designer Robert Kohut has created a true masterpiece. It’s no coincidence that his original design, initially shared on a knife forum, made it into mass production. The silhouette of this fixed-blade knife clearly evokes that of a throwing knife.

More than just for scoring points, this model with its tactical aesthetic, full-tang construction, and discreet black finish is designed to handle everyday cutting tasks: opening boxes, preparing packages, or cutting ropes with efficiency.

The 440C steel blade ensures excellent hardness, good edge retention, and corrosion resistance in any situation. The black titanium coating on the symmetrical single-bevel drop-point blade emphasizes its tactical character while offering protection from scratches and reducing glare.

The minimalist design continues in the slim G10 handle, which evokes the shape of a gladius, with a rounded pommel for a secure and balanced grip. The fine jimping on the spine ensures control and precision, while the weight reliefs at the base of the blade and on the pommel reduce the overall weight. The rear openings also serve as decorative hollow rivets, ideal for attaching a lanyard.

Lightweight yet sturdy, the Böker Plus Fafo is perfect as a tactical utility knife for law enforcement, special units, or anyone seeking a reliable, compact, and durable blade. The black Kydex sheath with belt adapter ensures safe and versatile carry.

The designer has also chosen to forgo his royalties, donating them to cancer research: a meaningful gesture that underscores his commitment to an important cause.

Intended Use: Light Utility

Production Type: Industrial
Country of Manufacture: China
Blade: Full tang in 440C stainless steel
Blade Finish: Black Coating
Handle: G10
Blade length: 97mm.
Blade thickness: 5.3mm.
Overall length: 177mm.
Weight: 105g.
Sheath: Kydex, with multi-position belt clip, stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Robert Kohut

The WithArmour BackUp-TN is a full-tang outdoor knife with a rugged and functional design, built to tackle any adventure with style and reliability. Its WASTEEL™ steel blade (420J2 laminated with VG-10), finished with an elegant Ti-PVD coating and shaped according to the precise “soldier grind” profile combined with a Scandi edge, offers a perfect balance between hardness, corrosion resistance, and ease of sharpening.

The handle, made of carbon fiber and G10 paired with a red G10 spacer, ensures a secure and comfortable grip in any situation. Equipped with a tan Kydex sheath featuring a Tek-Lock clip, paracord lanyard, and integrated fire starter, the BackUp-TN is ready for action right out of its premium black rigid box with embossed printing and glossy UV finish—ideal for those seeking a reliable, elegant, and ready-to-use tool.

Intended Use: Outdoor, bushcraft

Production Type: Industrial
Country of Manufacture: China
Blade: Full Tang in WASTEEL™ (420J2 laminated VG-10) with Soldier Grind (Saber+Scandi) edge, Direct to Sharp
Blade finish: Black Ti-PVD
Handle: Carbon fiber and G10 + Red G10, CNC-machined
Blade length: 101mm
Blade thickness: 6mm
Overall length: 203.2mm
Weight: 199.7g
Sheath: Kydex with Tek-Lock attachment system
Packaging: Cardboard box with manufacturer’s logos
Notes: Paracord and fire starter included in the package - design by Christophe Verstappen.

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

The WithArmour BackUp-TN is a rugged and functional full-tang outdoor knife, designed to tackle any adventure with style and reliability. Its WASTEEL™ (420J2 laminated VG-10) steel blade, finished with an elegant Gray Ti-PVD coating and shaped with a precise "soldier grind" combined with a Scandi edge, offers the perfect balance of hardness, corrosion resistance, and ease of sharpening.

The handle, made of tan Micarta paired with red G10, ensures a secure and comfortable grip in any situation. Equipped with a tan Kydex sheath featuring a Tek-Lock clip, paracord lanyard, and integrated firestarter, the BackUp-TN comes ready for action straight from its premium matte black rigid box with foil stamping and glossy UV logo — ideal for those who seek a reliable, stylish, and ready-to-use tool.

Intended use: Outdoor, bushcraft, survival
Production type: Full-tang, fixed blade knife
Country of origin: China
Blade: WASTEEL™ (420J2 laminated VG-10)
Blade finish: Gray Ti-PVD, Soldier Grind (Saber+Scandi), Direct to Sharp
Handle: Tan Micarta + Red G10, CNC machined
Blade length: 3.93" [100 mm]
Blade thickness: 0.23" [6 mm]
Closed length: 107 mm
Overall length: 8.85" [225 mm]
Closed thickness: 0.83" [21 mm]
Weight:
Locking mechanism: –
Clip: Tek-Lock clip on Kydex sheath
Packaging: Premium matte black foil-stamped rigid box with gloss UV logo & lift-off lid; Dimensions: 330 mm × 193 mm × 53 mm
Notes: Tan Kydex sheath with Tek-Lock clip, paracord, and firestarter; designer: Christophe Verstappen.

When the day demands commitment and reliability, the 203BT-03 Dacian™ is the fixed blade knife you can always count on.

Designed to tackle the challenges of everyday work and outdoor activities, it combines functionality and style thanks to its corrosion- and wear-resistant MagnaCut steel spear-point blade with a refined Blue Titanium Cerakote® finish. The brown micarta handle, shaped with side grooves, ensures superior ergonomics in every grip. The leather scout-carry sheath with Boltaron® insert offers a perfect balance between traditional aesthetics and modern safety, allowing for comfortable and accessible carry on the belt.

The Dacian™ 203BT-03 is the ideal companion for those looking for an all-purpose knife with a strong character.

Intended use: All-rounder / Light Utility

Type of production: Industrial
Country of production: USA
Blade: full tang in CPM-MagnaCut steel 60/62 HRC
Blade finish: Cerakote
Handle: Micarta
Blade length: 89.9mm.
Blade thickness: 3mm.
Total length: 192mm.
Weight: 95.5g.
Sheath: Hybrid - in fine leather, with the initial part in sturdy Bolaron
Packaging: Cardboard box with Benchmade logos
Notes: -

When work calls, it's best to act without drawing attention to yourself.

The new 203BK-02 Dacian™ in total black is the ideal tool for those looking for a reliable and discreet fixed knife to carry every day. Designed to tackle everyday challenges and outdoor activities without compromise, it combines a spear-point blade in CPM-MagnaCut with a black Cerakote® finish, a black canvas micarta handle, and black oxide hardware for total durability and essential style. The black leather sheath, with a molded Boltaron® insert, is designed for scout carry: maximum safety, immediate access, zero distractions.

The Dacian™ 203BK-02 is ready to accompany you wherever determination and practicality are needed.

Intended use: All-rounder / Light Utility

Type of production: Industrial
Country of production: USA
Blade: full tang in CPM-MagnaCut steel 60/62 HRC
Blade finish: Cerakote
Handle: Micarta
Blade length: 89.9mm.
Blade thickness: 3mm.
Total length: 192mm.
Weight: 95.5g.
Sheath: Hybrid - in fine leather, with the initial part in sturdy Bolaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Designed to tackle the most demanding situations, the Cajo II-TN is a heavy-duty, robust full tang tactical knife, ideal for heavy-duty use. Designed by Löfflmann Andreas, it combines premium materials, precision craftsmanship, and bold aesthetics, designed for operators and enthusiasts who refuse to compromise.

The VG-10 steel blade, hardened to 58-60 HRC, with a thickness of 6 mm and Chisel Grinding - Direct to Sharp sharpening, offers superior cutting power and great resistance. The stonewashed finish reduces unwanted reflections.

The Tan Micarta and Red G10 handle ensures a secure and ergonomic grip even in adverse conditions, while the satin-finished 420J2 steel guard adds further safety for intensive use.

The Kydex sheath, equipped with Tek-Lock Clipper, paracord lanyard, and T-Punch Sharpener, allows for modular and action-ready carrying. Everything is presented in an elegant matte black box with hot stamping and glossy UV logo, emphasizing the care and prestige of this model.

Intended use: Heavy Duty

Type of production: Industrial
Country of manufacture: China
Blade: full tang in VG10 stainless steel with asymmetrical full flat grind on the left side
Blade finish: Stonewashed
Handle: Tan Micarta + Red G10 and stainless steel guard
Blade length: 104mm.
Blade thickness: 6mm.
Total length: 212mm.
Weight: 289 g.
Sheath: thermoformed Kydex with belt loop for vertical carry. With dedicated compartment for diamond sharpener (included)
Packaging: Cardboard box with manufacturer's logos, certificates and warranty, UV patch, stainless steel multi-purpose card
Notes: Design by Andreas Löfflmann

Extrema Ratio Requiem M390 is an extremely compact, lightweight and effective tactical knife designed for professional use in real-world operational settings. Weighing only 93 grams, it can be used both as a main blade and as a reliable backup knife.

The blade is made of Böhler M390 steel, heat-treated to 61 HRC. Thanks to a powder metallurgical process, this material ensures high cutting efficiency, excellent wear resistance and remarkable protection from oxidation. The profile is spear point type, with a fuller fuller that further lightens the blade and a false counterbore extended three-quarters of the length. The flat edge sharpening ensures precise and efficient cuts.

The forprene handle, featuring Extrema Ratio's classic ergonomic recesses, ensures a firm grip even under extreme operating conditions.

Requiem M390 comes with an ASPIS hard scabbard, compatible with the M.O.L.L.E. The two adjustable loops allow for secure and customizable installation. The tapered invitation design facilitates blade reinsertion, while the trigger safety allows for quick and instinctive drawing with a simple press.

Intended Use: Tactical/Multi-role

Production Type: Industrial
Country of manufacture: Italy
Blade: M390 stainless steel hardened to 61HRC
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 93g.
Sheath: Nylon ASPIS with two multi-position clips, M.O.L.L.E. compatible.
Packaging: cardboard box with Extrema Ratio logos.
Notes: -

Extrema Ratio Requiem M390 is an extremely compact, lightweight and effective tactical knife designed for professional use in real-world operational settings. Weighing only 93 grams, it can be used both as a main blade and as a reliable backup knife.

The blade is made of Böhler M390 steel, heat-treated to 61 HRC. Thanks to a powder metallurgical process, this material ensures high cutting efficiency, excellent wear resistance and remarkable protection from oxidation. The profile is spear point type, with a fuller fuller that further lightens the blade and a false counterbore extended three-quarters of the length. The flat edge sharpening ensures precise and efficient cuts.

The forprene handle, featuring Extrema Ratio's classic ergonomic recesses, ensures a firm grip even under extreme operating conditions.

Requiem M390 comes with an ASPIS hard scabbard, compatible with the M.O.L.L.E. The two adjustable loops allow for secure and customizable installation. The tapered invitation design facilitates blade reinsertion, while the trigger safety allows for quick and instinctive drawing with a simple press.

Intended Use: Tactical/Multi-role

Production Type: Industrial
Country of manufacture: Italy
Blade: M390 stainless steel hardened to 61HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 93g.
Sheath: Nylon ASPIS with two multi-position clips, M.O.L.L.E. compatible.
Packaging: cardboard box with Extrema Ratio logos.
Notes: -

Civivi's Maxwell model is a sturdy fixed-blade knife designed to deliver superior performance in any situation.

With a D2 steel blade and a hardness rating of 58-60 HRC, the Maxwell is ideal for those seeking a versatile and durable cutting tool. The blade's black stonewashed finish, with a spear point design, increases its wear resistance. The black G10 handle ensures a solid and comfortable grip, while the “T-Clip” carry clip, designed by renowned designer Bob Terzuola, allows for convenient and safe carrying.

Complete with a durable Kydex holster and black paracord lanyard, the Maxwell is perfect for those who need a sturdy, yet stylish and functional knife for any adventure or everyday need.

Intended Use: Sporting/Utility

Production Type: Industrial
Country of manufacture: China
Blade: full tang in D2 steel
Blade treatment: black stonewashed
Handle: in G10
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 259mm.
Weight: 266g.
Sheath: made of thermoformed kydex, with “T-Clip” hooking system by Bob Terzuola
Packaging: cardboard box with Civivi logos
Notes: -

Inspired by the breathtaking landscape and craft traditions of Mora, “Color of the Year” celebrates the uniqueness of Dalarna, a region in the heart of Sweden famous for its history, craftsmanship and iconic colors.

Dalarna is known for its Dala horses, traditional red houses and kurbits painting, which symbolize Swedish art, nature and cultural roots.

Each year, we select colors that capture the essence of this land, from the intense tones of the Dala horses to the delicate hues of the crafts. “Color of the Year” goes beyond aesthetics, creating a deep connection between our land and each craft knife, which becomes a symbol of tradition, culture and innovation.

Intended Use: Hiking / Hunting / Sports

Type of production: industrial
Blade: Carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 2025

Inspired by the breathtaking landscape and craft traditions of Mora, “Color of the Year” celebrates the uniqueness of Dalarna, a region in the heart of Sweden famous for its history, craftsmanship and iconic colors.

Dalarna is known for its Dala horses, traditional red houses and kurbits painting, which symbolize Swedish art, nature and cultural roots.

Each year, we select colors that capture the essence of this land, from the intense tones of the Dala horses to the delicate hues of the crafts. “Color of the Year” goes beyond aesthetics, creating a deep connection between our land and each craft knife, which becomes a symbol of tradition, culture and innovation.

Intended Use: Hiking / Hunting / Sports

Type of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 2025

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never used
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

PUGIO: The name evokes the historic Roman dagger, but the handle, with its tapered cuttlebone-like shape, also recalls the elegance of Caucasian daggers.

Compact and sharp, this boot dagger is designed as a backup weapon, ideal for defense and perfect for those seeking discretion and portability. The blade, sharpened only on one side, ensures lethal accuracy, while the absence of guards prevents any risk of entanglement in close, high-intensity combat. The rigid scabbard with automatic engagement system and Tek-Lok type attachment allows for unique versatility: it can be positioned horizontally, vertically or tilted at a 45-degree angle, easily adapting to any requirement.

Intended Use: Tactical / CQC

Production type: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Desert Warfare
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 225mm.
Weight: 190g.
Sheath: made of ABS, rigid, with Tek-Lok type attachment
Packaging: cardboard box with Extrema Ratio logos
Notes: Single edge version

Extrema Ratio introduces three new color variations of the Shrapnel One model: Total Black, Desert Dark Stone and Black Satin, maintaining the ruggedness and reliability of the original with a stylish twist. This multi-role knife is ideal for bushcraft, outdoor and survival enthusiasts, perfect for both military and contractor activities. The 157 mm fixed blade, made of Böhler N690 steel (58 HRC), offers an optimal balance of hardness and strength, making it perfect for activities such as cutting wood or challenging situations.

The forprene handle provides a secure and comfortable grip, even in difficult conditions, while the full-flat rounded blade ensures excellent cutting power. The design includes a hand guard that enhances safety and ergonomics. The back of the blade features thumb serrations, increasing grip.

The ambidextrous Cordura sheath is durable and secure, featuring a blade lock that ensures safe carrying. With a MOLLE system on both sides, the scabbard can be easily attached to tactical vests and belts, with adjustable height and position for right- and left-handed people. Choose your version and get ready to explore!

Intended Use: Tactical/Military

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Dark Stonewashed
Handle: Forprene
Blade length: 157mm.
Blade thickness: 6.3mm. on handle, 4mm. on blade
Total length: 287mm.
Weight: 289g.
Sheath: ambidextrous, cordura, compatible with M.O.L.L.E. system.
Packaging: cardboard box with Extrema Ratio logos
Notes: -

Extrema Ratio introduces three new color variations of the Shrapnel One model: Total Black, Desert Dark Stone and Black Satin, maintaining the ruggedness and reliability of the original with a stylish twist. This multi-role knife is ideal for bushcraft, outdoor and survival enthusiasts, perfect for both military and contractor activities. The 157 mm fixed blade, made of Böhler N690 steel (58 HRC), offers an optimal balance of hardness and strength, making it perfect for activities such as cutting wood or challenging situations.

The forprene handle provides a secure and comfortable grip, even in difficult conditions, while the full-flat rounded blade ensures excellent cutting power. The design includes a hand guard that enhances safety and ergonomics. The back of the blade features thumb serrations, increasing grip.

The ambidextrous Cordura sheath is durable and secure, featuring a blade lock that ensures safe carrying. With a MOLLE system on both sides, the scabbard can be easily attached to tactical vests and belts, with adjustable height and position for right- and left-handed people. Choose your version and get ready to explore!

Intended Use: Tactical/Military

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 157mm.
Blade thickness: 6.3mm. on handle, 4mm. on blade
Total length: 287mm.
Weight: 289g.
Sheath: ambidextrous, cordura, compatible with M.O.L.L.E. system.
Packaging: cardboard box with Extrema Ratio logos
Notes: -

For everyday carry enthusiasts who prefer a multi-purpose fixed-blade knife to a folder, the 203BT-01 Dacian™ is designed to be your perfectly sized companion for general purpose, outdoor recreation or EDC.

The super-strong, corrosion-resistant MagnaCut steel blade has a spear point profile and high sharpness for maximum cutting ability with a Blue Cerakote finish. The durable Canvas Micarta handle is constructed with deep finger grooves for extreme comfort in different grip positions. The 203BT-01 Dacian™ includes a contoured sheath with a high-retention clip for easy access whether carried in a pocket or on a belt.

Intended Use: Allrounder/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: full tang in CPM-MagnaCut 60/62 HRC steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 89.9mm.
Blade thickness: 3mm.
Total length: 192mm.
Weight: 95.5g.
Sheath: Thermoplastic with Black Oxide clip
Packaging: Cardboard box with Benchmade logos
Notes: -

The Maserin Gladio Alato was designed to equip the personnel of the 66th Trieste Airborne Infantry Regiment, the only airborne infantry unit in the entire Armed Force, with a dagger that reflects the spirit, symbolism and specific needs of the unit.

To develop the Winged Gladio, the Maniago-based company collaborated with the Centro Formazione Aeromobile (CFA), affiliated with the Trieste Regiment. The blade has a design reminiscent of the classic Gladio, while the handle, typical of military tactical daggers, features a texture that provides an excellent grip.

Given the tactical context in which the unit operates, the dagger has been equipped with additional features for emergencies: there is a slot glass breaker and two holes on the guard that allow the knife to be attached to a pole or other supports.

Intended Use: Tactical/Military

Type of production: Industrial
Country of manufacture: Italy
Blade: single edge, full tang in N690Co steel at 59HRC
Blade treatment: DLC
Handle: G10
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 312mm.
Weight: 234g.
Sheath: made of kydex, belt-mounted, compatible with MOLLE attachments
Packaging: cardboard box with Maserin logos
Notes: Designed to equip the personnel of the 66th Airborne Infantry Regiment Trieste, the only airborne infantry unit in the entire Italian Armed Force.

Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.

The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.

This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.

Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.

Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.


Intended Use: Hunting / Hiking

Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -

For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.

Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -

To commemorate in our own way the 50th anniversary of the death of our great-grandfather Giuseppe Maserin known as "Belu" (1885 - 1972), an Alpine soldier of the 4th Battalion Cadore Regiment and Cav. of Vittorio Veneto, we wanted to make a dagger in the manner of the "Arditi", that is, inspired by those handcrafted daggers that were made from the former bayonets of the Carcano 91 rifles. Specifically, we were inspired by the shape of the bayonet that was made at the CO.RI.CA.MA factory in Maniago.

We called it BeluM joining the M of our surname to 'Belu', thus obtaining a reference to the Latin word 'bellum'. It is a project of clear historical inspiration, but realised with modern machinery, technology and materials. The stenciled wooden box deliberately recalls the features of the crates in which war material was once stored.

BeluM is dedicated to our great-grandfather Giuseppe and all the heroes who sacrificed their lives for their country in any way.

Intended Use: Commemorative / Historical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel 
Blade treatment: Satin finish
Handle: Paosantos wood; AIS 420 stainless steel guard; AISI 316 stainless steel pommel forged from solid
Blade length: 202mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 340g.
Sheath: leather
Packaging: wooden box with stencil logos
Notes: Design by Bonus Design

A reliable outdoor knife with integrated lock that can be used in many difficult situations. Designed for the hunter and adventurer, the knife is an excellent choice when you need a safe and robust tool close at hand. The blade is made of Swedish stainless steel and has a long sharpness life.

The ergonomic barrel-shaped polymer handle features a soft non-slip grip, a finger guard and a 2.5 mm thick contoured blade, profiled and made of Swedish stainless steel, which ensures strength and stability in every cut.

Thanks to the design of the blade and the handle, the knife is ideal for working safely and efficiently in various weather conditions during all hunting seasons. The polymer knife sheath is symmetrical meaning it is suitable for both right and left handed users and has a Swedish vegetable tanned leather strap that can be easily attached to a belt. A survival kit with integrated lock, diamond sharpener and reflective paracord is mounted on the sheath of the knife.

Knife series: Kansbol
Knife type: All-round
Area of use: Bushcraft, Hunting, Outdoor
Color: Burnt Orange

SPECIFICATIONS

Blade length: 109mm
Blade thickness: 2.5mm
Knife length: 226mm
Total length: 250mm
Net Weight: 177.1g
Steel Type: Recycled Swedish Stainless Steel

Compatibility with the fire starter: Yes
Degree of flexibility: Rigid
Handle material: Thermoplastic rubber
Dexterity: Right, Left
Sheath: in polymer
Sheath Orientation: Left, Right

Extrema Ratio Misericordia Desert, which preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment, derives from the commemorative dagger made on the occasion of the 140th anniversary of the 4th Alpine Regiment and the 70th since the founding of the Alpine Paratroopers.

It is a tactical-type fixed-blade knife designed for those instances when the knife must be extremely light and compact. The new desert coloring also makes this model available in a shade in line with the most common needs of modern operational departments.

The blade is milled from Böhler N690 steel, hardened to 58 HRC for the best balance of edge retention and strength, is 118 mm long, 4mm thick, and has a flat edge. The weight of the knife is just 87g. The profile is a spear point type, with a full-length shank that makes it even lighter and with a ¾-length false counterblade. The finish is a stone washed type.

The knife's polymer handle features classic Extrema Ratio shells that make for a more secure grip and is attached to the tang by a through-screw. On the rear end the handle flows connecting with a wide ring equipped with a "skull crusher" appendage: a ring that allows the use of martial arts techniques and ensures the hand a very solid grip. In this version the handle is in Desert coloring.

Since this is a knife designed for professional use, much attention has been paid to ease of carrying, accessibility and extraction in case of need. The knife is secured to the sheath by a quick-release safety that can be easily reversed for left-handed use. The sheath is also in Desert coloring, made of high-strength Nylon, very versatile and equipped with 2 adjustable loops that allow it to be attached to M.O.L.L.E systems, facilitating quick extraction in various tactical scenarios.




Intended Use: Tactical / Multirole

Production Type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: FRN (fiberglass reinforced nylon)
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: Nylon with two multi-position clips, designed for M.O.L.L.E. type attachments.
Packaging: cardboard box with Extrema Ratio logos
Notes: Rear Skull Crasher - Derived from the Black model, adopted by the 4th Alpine Parachute Regiment.

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.

It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.

The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.

Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.

Intended use: Hunting/Sports/Collection

Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -

The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been used in wild nature and tackles hunting, fishing and life in the open air with ease. This version of Hunting is the full tang version, more balanced and robust. Roselli full tang knives are resistant, durable and perfect for heavy use.

This handmade Finnish hunting knife was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.

This new version features a full tang carbon steel blade and a curly birch handle, coated with linseed oil, which brings a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.

Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives

Roselli - Hunting Knife - R100 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Roselli - Grandmother Knife - R130 - Artisan Knife

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -

With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.

The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.

The slightly curved and short blade is particularly useful and comfortable for hunting use.

The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel gives the knife a very long edge life - please note that the hard UHC steel is not suitable for penetrating bone or other hard materials. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: -
Total length: 200mm.
Balancing: -
Weight: 100g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

For the big game hunter who stalks prey through the forest, every gram counts. Try the brand new 15600OR Raghorn ™ ️, an ultralight fixed blade knife made for working large animals.

This lightweight hunting knife bares ultra sharp 14 degree CPM-CruWear®️ steel for exceptional cutting performance with high edge life. Cerakote®️ high visibility orange and lightweight carbon fiber add to an uncompromising hunting knife, ready and perfectly suited for any hunting use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-CruWear® carbon steel (63-65)
Blade finish: Cerakote®️ orange
Handle: Carbon Fiber
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 22.5g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Note: -

Game and waterfowl require a fixed scalpel-like blade and the all-new 15700 Flyway™️ is the right tool for the job. With the right length of blade in CPM-154, featuring SelectEdge with 14-degree penetrating sharpening, this knife is perfect for working your game. The solid, stable orange G10 handle boasts perfect ergonomics, while the two-tone Boltaron sheath makes it easy to slip into your backpack for river or creek trips. With surgical precision and efficient design, the 15700 Flyway™️ is the small game hunter's new best friend.

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM (58/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: kydex
Packaging: cardboard box with Benchmade logos
Notes: -

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

Intended Use: Tactical/Military/Survival

Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearings

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

ERMES is the commemorative knife developed in collaboration with the Special Operations Helicopter Regiment (R.E.O.S.) which is part of the Army Aviation Command.

The R.E.O.S. is the operational unit of helicopters in support of special forces composed of personnel specifically trained and equipped to support military activities in any operational context.

The stylized guards of the knife represent the wings present in the heraldic coat of arms of the unit. The steel used is the reliable Bölher N690Co heat treated to 58 HRC. Fiber Reinforced Nylon (FRN) polyamide polymer was chosen for the handle. The hybrid Kydex and fabric sheath is equipped with belt or harness attachment with MOLLE interface system.

It is available in two versions:
"ERMES SATIN ORDINANZA" with satin finish blade and ABS case.
"ERMES BLACK OPERATIVO", with the burnished blade.

Intended use: Collection / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 256mm.
Weight: 229g.
Sheath: Kydex and Fabric with MOLLE type hooking system.
Package: Commemorative case in ABS with the logos of the department
Notes: Commemorative knife developed in collaboration with the Regiment Helicopters for Special Operations (R.E.O.S.)

ERMES is the commemorative knife developed in collaboration with the Special Operations Helicopter Regiment (R.E.O.S.) which is part of the Army Aviation Command.

The R.E.O.S. is the operational unit of helicopters in support of special forces composed of personnel specifically trained and equipped to support military activities in any operational context.

The stylized guards of the knife represent the wings present in the heraldic coat of arms of the unit. The steel used is the reliable Bölher N690Co heat treated to 58 HRC. Fiber Reinforced Nylon (FRN) polyamide polymer was chosen for the handle. The hybrid Kydex and fabric sheath is equipped with belt or harness attachment with MOLLE interface system.

It is available in two versions:
"ERMES SATIN ORDINANZAR" with satin finish blade and ABS case.
"ERMES BLACK OPERATIVO", with the burnished blade.

Intended use: Collection / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Burnishing Mil-C-13924
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 256mm.
Weight: 229g.
Sheath: Kydex and Fabric with MOLLE type hooking system.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: Commemorative knife developed in collaboration with the Regiment Helicopters for Special Operations (R.E.O.S.)

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 279mm.
Weight: 125g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: -

The Extrema Ratio Misericordia was adopted by the 4th Alpine Paratroopers Regiment which helped develop and test the product. It is a tactical fixed blade knife, extremely light and compact, it can be used both as a main knife or as a backup blade.

The blade is made of Böhler N690 steel, heat-treated to a hardness of 58 HRc, it is 118 mm long, 4mm thick and has a flat edge.

The profile is of the spear point type, with a full length fuller which makes the blade even lighter and with a false counter-thread at ¾ length. The blade is available with the classic Extrema Ratio MIL-C-13924 black finish.

The handle in fiberglass-reinforced nylon (FRN) features the classic Extrema Ratio recesses that make the grip safer and is fixed to the tang by means of a through screw.

On the rear end the handle flows connecting with a large ring, which allows the use of martial arts techniques and ensures a very solid grip to the hand, equipped with a "skull crusher" appendix in hard metal.

The overall weight of the knife is just 87g. Being a knife designed for professional use, much attention has been paid to ease of port, accessibility and extraction in case of need. The knife is secured to the sheath by a quick-release safety catch that can be easily reversed for use by left-handers.

The sheath is made of highly resistant Nylon, it is very versatile and two adjustable loops allow it to be fixed inside the loops of M.O.L.L.E.

The sheath is equipped with a conical invitation to facilitate the re-insertion of the knife while a simple pressure on the trigger safety allows it to be extracted quickly and instinctively.

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel hardened to 58HRC
Blade treatment: MIL-C-13924 burnishing
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: in Nylon with two multi-position clips, designed for M.O.L.L.E.
Packaging: Cardboard box with Extrema Ratio logos
Notes: Rear Skull Crasher - Adopted by the 4th Alpine Paratroopers Regiment.

Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced.

The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.

Intended use: Tactical / Backup

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced.

The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.

Intended use: Tactical / Backup

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced.

The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.

Intended use: Tactical / Backup

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 273g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Ultra-Tiny keyring knife, made of TC4 titanium alloy and made with precise CNC machining.
The NTK05 model uses a No. 11 scalpel blade, easily replaceable and accessible in the market.

The comfortable 35-degree grip ensures stability and cutting precision.
The elegant and tapered design allows it to be attached to a key ring, to a backpack, to use it as a mini EDC or as a pendant.

Type of production: industrial
Country of production: China
Blade: replaceable, in stainless steel, N.11 Scalpel Blade
Handle: unibody in titanium with the following sizes 55mm x 12mm x 3mm
Blade length: 20mm.
Blade thickness: 0.3mm.
Total length open: 96mm with blade completely extracted
Weight: 5g.
Clip: -
Packaging: Cardboard box with Nitecore logos
Note: -

Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.

Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.

The light and compact blade meets the demands of a modern tactical knife today.

Intended use: Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin finish
Handle: Wood
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Leather
Packaging: display case
Notes: -

Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.

Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.

The light and compact blade meets the demands of a modern tactical knife today.

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Kydex
Packaging: ABS suitcase with 183rd Parachute Regiment logos "Nembo"
Note: -

Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.

Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.

The light and compact blade meets the demands of a modern tactical knife today.

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Kydex
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Hiking / Hunting / Sports

Type of production: industrial
Blade: Carbon steel C100
Country of production: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Sheath: in plastic material
Note: -

The Opinel N°5 Inox knife is a versatile pocket tool, ideal for daily tasks such as opening packages, model making, or as a practical letter opener. Its 6 cm blade made of Sandvik 12C27M stainless steel offers excellent cutting quality and corrosion resistance, maintaining sharpness even after prolonged use. The beechwood handle, sourced from PEFC-certified French forests, is treated with protective varnish to resist moisture and dirt, ensuring a comfortable and ergonomic grip. It is important to note that the Opinel N°5 does not feature the Virobloc locking system; therefore, the blade stays open through friction, requiring careful handling during use. This knife embodies the traditional values of the Opinel brand: simplicity, durability, and efficiency.

• Intended use: Opening packages, model making, letter opener
• Production type: Industrial
• Country of production: France
• Blade: Sandvik 12C27M stainless steel
• Blade finish: Satin
• Handle: Varnished beechwood
• Blade length: 60 mm
• Blade thickness: 1.5 mm
• Closed length: 70 mm
• Total length: 130 mm
• Closed thickness: 10 mm
• Weight: 10 g
• Locking mechanism: Friction (no locking system)
• Clip: None
• Packaging: -
• Notes: Corrosion-resistant blade; minimal maintenance required

Intended use: Hiking / Hunting / Sport

Type of production: industrial
Blade: Carbon steel C100
Lama production: Sweden
Handle: plastic and rubber
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 205mm.
Balancing: -
Weight: 98g.
Sheath: in plastic material
Note: -

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we remember this important page of Italian military history with a limited series of celebrations of 1918 copies. This version has a burnished blade, a polymer handle and a black cordura sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Polymers
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: Nylon leg strap
Packaging: cardboard box with Extrema Ratio logos
Notes: Edition limited edition in 1918 copies - Edition to celebrate the hundred years of the Arditi of Italy

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -

Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.

Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -