Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In good condition, shows signs of wear on the titanium and a small mark on the blade that does not compromise its use
* Available on the market: Available to order from the manufacturer in different technical configurations
* Sharpness: Factory sharp
* Marks on blade: a small mark on the blade, possibly due to an impact or a fall
* Marks on handle: several signs of wear on the titanium
* Box: -
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collectible/Sporting

Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium and Bocote
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 156mm.
Weight: 40g.
Closure: Frame Lock
Clip: Titanium
Notes: Mnandi means “very beautiful” in Zulu - knife previously purchased and used

Style or icon?
Whatever your interpretation, the Boker Damast Annual Knife 2025, produced in a limited edition of only 999 units worldwide, captivates knife enthusiasts in every form. Electrifying, engaging, pulsating-a pristine enthusiasm with an ever-growing trend!

Shaped by tradition, the Annual Damascus Knife cites the Boker TRPPR (pronounced: trapper) as an exceptional gentleman's knife that brings the spirit of the celebrated original Trapper into a new era. Though stripped down to its essentials, the pocket knife is no slouch. The blade opens on ball bearings and is made of 100-ply Damascus and hand-forged in the USA by Chad Nichols with the Stainless Meadow pattern, opens with surprising fluidity thanks to the flipper, while the refined integral framelock with over-extension stop secures the knife securely. The titanium body, pleasant to the touch and with a clean design, creates an elegant contrast to the blade and emphasizes the guiding principle of contemporary knife culture. Decorative accents are offered by the thermally colored screws, including the pivot screw, where the famous Boker shaft mark immediately catches the eye, as well as the titanium clip (tip-up/r) with ball, made from a solid block.

Intended Use: Sporting/collection

Production type: Industrial
Country of manufacture: Germany
Blade: Stainless Meadow stainless damascus steel handcrafted by Chad Nichols
Blade treatment: -
Handle: titanium
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 189mm.
Weight: 78g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: display case, certificate of authenticity
Notes: Flipper-type opening system on ball bearing

This exclusive version of the Military 2 features a blade made of CPM 15V, an extraordinary steel that offers the highest wear resistance of any cold-working tool steel available today. With nearly 15 percent vanadium, its unique composition creates a microstructure rich in vanadium carbides, resulting in exceptional cutting performance and unparalleled edge retention.

The limited design of Spyderco's CPM 15V family of knives is further refined through a specialized heat treatment developed by renowned custom knife maker Shawn Houston. This Sprint Run edition of the Military 2 faithfully includes all the proven elements of this model, including the high-strength Compression Lock® mechanism and a four-position pocket clip for total convenience.

To underscore its membership in the CPM 15V family, the knife features brown peel-ply textured G-10 grips, and Shawn Houston's “Triple B” logo laser engraved on the back of the fully flat blade.

CPM 15V is a top-quality steel known for its high vanadium content, which allows for a rich microstructure of high-hardness carbides. This makes it perfect for those looking for a blade that will deliver exceptional performance even in the harshest conditions, with unmatched wear resistance and wire life. Its production is complex and expensive, but the result is a steel that not only offers superior performance, but also holds its edge for a long time.

Intended Use: Sporting/Collection

Type of production: Industrial
Country of manufacture: USA
Blade: Carbon steel CPM-15V
Blade finish: Stonewashed
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed: 140mm.
Total length: 242mm.
Weight: 122g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Print Run edition with tempering done by Shawn Houston

The legacy of a classic: a timeless tradition interpreted in a contemporary way by Boker Plus. The Trapper model owes its name to the hunters who roamed the forests of North America.

The knife's design dates back to the 19th century and is characterized by slender lines and the distinctive bolsters on the handle. The Boker Plus Modern Trapper Uno skips the rear bolster and opts for a front bolster coated in titanium with grey Micarta handle scales. Instead of a nail pull and slipjoint system typical of these models, this gentleman's knife uses a flipper and a liner lock to secure the drop point blade, which is mounted on a ball bearing and made of Nitro-V steel.

The flat central screw of the blade, the two-tone satin finish of the blade, and the elegant tip-up clip elegantly complete the neat appearance of this pocket knife.

Intended Use: Sport/collection

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Satin
Handle: Steel bolsters with titanium finish and Micarta scales
Blade Length: 82mm
Blade Thickness: 2.3mm
Overall Length: 187mm
Weight: 69g
Clip: Stainless steel, removable
Lock: Liner Lock
Packaging: Cardboard box with Boker Plus logos
Notes: Flipper opening system with ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Designed by the well-known Danish designer Jesper Voxnaes, Odino is a high-end folding knife characterized by the frame lock architecture with a rotation system on bearings and the use of noble and technological materials (frame entirely in titanium and grip in carbon fiber, titanium or G-10). Vox's unique style, influenced by both Scandinavian design and American cutlery, the attention to detail and the excellence of Viper's typical workmanship create an absolutely original and high-level knife.

Intended use: Sporting/EDC

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58/59HRC
Blade treatment: Stonewashed
Handle: Carbon Fiber and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 100mm.
Total length: 184mm.
Closed thickness: -
Balance: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening system

Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.

WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collection

Type of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment:-
Handle:stainless damascus steel
Blade length: 64mm.
Blade thickness: 2mm.
Total length: 141mm.
Weight:40g.
Clip:stainless damascus steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 61HRC
Blade treatment: satin finish
Handle: titanium and carbon fiber with copper inserts
Blade length: 88mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 142g.
Clip: titanium, machined from billet
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Jens Anso - Limited edition of only 500 pieces numbered on blade, box and certificate

Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.

The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.

The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.

The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.

The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton case

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: black
Handle: steel
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 78g.
Clip: monolithic, in steel, removable
Closure: FrameLock with removable stainless steel flap
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle

2020 limited edition knife, designed by Lucas Burnley.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: M390 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 100mm.
Blade thickness: 3.9mm.
Closed length: 130mm.
Total length: 230mm.
Weight: 173 g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: Burnley design

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel stonewashes
Blade length: 70mm.
Blade thickness: 2.7mm.
Total length: 155mm.
Weight: 117g.
Clip: stainless steel, removable and reversible
Closure: Frame Lock
Package: cardboard box with Boker Plus logos
Notes: Design by Philippe Jourget - opening system with ball bearing movement

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade treatment: Satin
Handle: G10 and stainless steel
Blade length: 85mm.
Blade thickness: 3.9mm.
Closed length: 117mm.
Total length: 202mm.
Weight: 159g.
Clip: stainless steel, with blue anodizing
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Jesper Voxnaes

Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

Intended use: sports collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

Intended use: sports collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

Intended use: sports collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

Intended use: sports collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with its well-kept ergonomics, has an anodized titanium structure, enclosed in thin carbon fiber folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 78g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with green carbon fiber insert
Blade length: 96mm.
Blade thickness: 4mm.
Length closed: 121mm.
Total length: 216mm.
Weight: 125g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Ernest Emerson - Opening by Thumb Disk

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with marbled carbon fiber insert
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Weight: 95g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks last

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Green G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. Emerson

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. Emerson

Purpose: Sportsman / Collectibles

Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -

Cutlery Collini is an authorized dealer of products knives Rick Hinderer

Use: Tactical / Collection

Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -

Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.

Use: Collection / Sports

Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper

Intended use: sports / tactical

Type of production: Industrial
Production Country: USA
Blade: In-CPM S90V stainless steel
Blade Treatment: matt black DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3 mm.
Closed Length: 123mm.
Overall length: 213mm.
Thickness when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run in 2017 in a limited edition - Opening KVT on ball bearings - Opening Carson Flipper System

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Surface treatment: Blackwash
Handle: Titanium bronzed
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 225mm.
Thick when closed: 14.5mm
Weight: 180g.
Closing: Framelock
Clip: Removable, stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Design by Rob Walker

Intended use: Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Weight: 124g.
Closing: framelock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - Design by Les George - Opening KVT on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: DLC Coating
Handle: G10 Orange and Titanium DLC Coating
Blade length: 91mm.
Blade thickness: 3.6mm.
Closed Length: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Weight: 178g.
Lock: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - in collaboration with Emerson Knives - patented opening system Wave

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 123mm.
Overall length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Viper - Kyomi by Vox - Titanium and Carbon Fiber - V5934FC - knife

Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon fiber
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 120g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Orange G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Kyomi is a compact frame lock knife which combines the unmistakable design of Jesper Voxnaes with innovative features, such as ball bearings and two different back spacers. Comfortable to hold and carry, thanks to smooth edges and a robust reversible titanium clip, it is available with the left scale made of different materials.

Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 156g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Destinazione d'uso: Sportivo / Collezione

Lama: in acciaio inox VG10
Manicatura: Fibra di carbonio
Lunghezza lama: 55mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 68mm.
Lunghezza totale: 117mm.
Bilanciatura: -
Peso: 56g
Chiusura: Frame Lock
Clip: amovibile e reversibile in titanio
Fodero: -
Note: Design by Chad Los Banos - Edizione a tiratura limitata e numerata, realizzata in soli 600 esemplari