Knife - Essential Tool for Camping, Outdoor Adventure and collection
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EY -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - F1x Pilot Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1X -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Fallkniven - Erna SK18 - BBQ Chef 18cm - professional kitchen knife
Recommended use: Barbecue, Vegetable, Raw Meat, Fish
Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked FallknivenF-SK18 -
Fallkniven - Alpha - Chef 20cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone. Mod. Alpha Total length (mm) 330 Blade length (mm) 200 Blade thickness (mm) 3 Blade profile Convex Tang Full tang construction Weight (knife) 260g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivetsF-ALPHA -
Fallkniven - Delta - Santoku 15.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone. Mod. Delta Total length (mm) 280 Blade length (mm) 155 Blade thickness (mm) 3 Blade profile Convex Tang Full tang construction Weight (knife) 230g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivetsF-DELTA -
Fallkniven - Sierra - Paring Knife 11.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone. Mod. Sierra Total length (mm) 225 Blade length (mm) 115 Blade thickness (mm) 2 Blade profile Convex Tang Full tang construction Weight (knife) 110g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivetsF-SIERRA -
Fallkniven - Zulu - Paring Knife 7.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone. Mod. Zulu Total length (mm) 175 Blade length (mm) 75 Blade thickness (mm) 2 Blade profile Convex Tang Full tang construction Weight (knife) 80g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivetsF-ZULU -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - DC3 - Affiatore Ceramica e Diamante - coltello
Pietra a secco per affilatura con un lato in ceramica grana 6000 e con un lato al diamante da 25 micron (grana 600) a grana fine. Dimensioni di 25x75 mm.
E' accompagnata da un comodo e robusto astuccio in cuoio nero ed è l'ideale per peso e dimensione da portare sempre con se in escursione per rapide ma efficaci affilature da campo.
Livello qualitativo: ottimoF-DC3 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5 -
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia
Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -F-NL5CX -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - TK3 knife - Jigged Bone - coltello
Destinazione d'uso: sportivo
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Sweden
Manicatura: Acciaio Inox 420J2 e Cervo Ambrato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 165mm.
Bilanciatura: -
Peso: 100g.
Chiusura: Back Lock
Clip: -
Fodero: Nylon
Note: -F-TK3JB -
Fallkniven - TK3ic knife - Cocobolo - coltello
Fallkniven Tre Kronor TK3
La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in corduraF-TK3ic -
Fallkniven - FH9 Braun Micarta - Knife
Type of production: Industrial
Blade: 3G laminated steel three-layer (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment: -
Production Lama: Sweden
Handle: Stainless Steel 420J2 and brown micarta
Blade length: 67mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Overall length: 157mm.
Weight: 90g.
Closing: Lockback
Clips: stainless steel
Notes: -F-FH9 -
Fallkniven - LTC Pink rd knife - Slip Joint - 3G Laminated steel - Knife
The LTC is a gentleman that you can easily carry in your pocket, without a blade lock but with an excellent retention spring once opened. The quality remains the same as any other Fallkniven knife. They have spared no expense when it comes to blade quality. Fallkniven was among the first in the world to introduce a knife with a blade in their famous 3G powder-coated Japanese steel. The blade has grooves on both sides, making it usable for both right and left handed users. The LTC is available in a variety of attractive colors and comes in a beautiful solid wood gift box.
Intended use: edc
Type of production: industrial
Blade: Three-layer laminated 3G stainless steel at 62HRC
Blade treatment: -
Blade production: Japan
Handle: Anodized aluminum
Blade length: 59mm.
Blade thickness: 2.5mm.
Closed length: 81mm.
Total length: 140mm.
Weight: 33g.
Closure: -
Clips: -
Notes: wooden boxF-LTCrd -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - Survival knife S1 Pro - Knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 130mm.
Blade Thickness: 7mm.
Overall length: 247mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 268g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logosF-S1PRO -
Fallkniven - U2 knife Zytel - Aquarius Edition - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Aquarius is engraved on the bladeF-U2AQ -
Fallkniven - U2 Zytel - Pegasus Edition - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Pegasus is engraved on the bladeFK-U2Pe -
Fallkniven - PD knife 35 years - SGPS 67 layer steel - Ironwood - knife
Intended use: collection
Type of production: industrial
Blade: 67-layer laminated steel (VG2 and SGPS "Super Gold Powder Stainless Steel" at 62 HRC)
Blade treatment: -
Lama production: Japan
Handle: 420J2 Stainless Steel and Ironwood
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 180mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: Nylon
Notes: Limited Edition to celebrate the 35th anniversary of FallknivenF-PD -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - F1xb Pilot Knife black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Fallkniven - Survival F1 Pro - knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 100mm.
Blade Thickness: 7mm.
Overall length: 215mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 178g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logos, watertight box in ABS with Fallkniven logos, sharpening stone Fallkniven DC4 with leather pouchF-F1PRO