Knife - Essential Tool for Camping, Outdoor Adventure and collection

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Coyote Tan Idroglider
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: Advanced to 2.5cm. the branch of guard
Weight: 352g.
Closure: -
Clip: -
Sheath: Nylon compatible M.O.L.L.E.
Packaging: cardboard box with Fox logos
Notes: Survival Kit in aluminum box sealed, with its MOLLE compatible nylon sheath

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Saw wire
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* pencil

The VULPIS series was born out of the need to create a compact, versatile multi-purpose knife with a modern design that blends perfectly with our classic products. The inspiration for this line comes from the DUCA, the name of the multi-purpose knife typical of the people of Maniago. This knife originated in the second half of the 19th century in Maniago, when hunting knife sharpeners with blades of various sizes, ivory toothpicks, and tweezers for removing thorns were being produced.

These knives were presented at the 1888 National Exposition in Turin by the Bet Giovanni company, which won a gold medal for the quality of its products. It was likely in this context that Luigi Amedeo of Savoy, Duke of the Abruzzi, decided to visit one of the company’s two stores in Turin, where he saw and ordered the four-blade multi-purpose knife, which he selected as part of the equipment for the North Pole expedition he led in 1899.

Intended use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: M390 stainless steel 59/60 HRC
Blade finish: Blackwash PVD
Handle: Copper with Blackwash PVD finish
Blade length: 55 mm
Blade thickness: 2 mm
Closed length: 63 mm
Total length: 135 mm.
Thickness when closed: 10 mm.
Weight: 75 g.
Closure: Slip Joint (no blade lock)
Clip: Removable, stainless steel, with Blackwash PVD finish
Packaging: Cardboard box with Vulpis / Fox Knives logos
Notes: Limited edition of only 250 pieces, numbered on the blade and box

Intended use: EDC / sports

Type of production: Industrial
Country of production: Italy
Blade: Niolox stainless steel 59/61HRC
Blade finish: Stonewashed
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 190mm.
Weight: 60g.
Closing mechanism: Back Lock
Clip: removable and reversible, stainless steel, flush
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

The new hunting version of the celebrated Fox FX-604 features an advanced design designed to meet the specific needs of hunting enthusiasts.

With a superior blade designed for precision skinning and a sturdy rigid kydex sheath that ensures safe belt carry, this knife is the perfect solution to tackle every stage of your hunting day with reliability and comfort. 

Intended Use: Hunting/Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Cerakote
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Sleeve thickness: 18mm.
Weight: 135g.
Locking mechanism: Liner Lock
Sheath and Clip: rigid thermoformed Kydex belt sheath with Tek-Lok type attachments
Clip: stainless steel, removable and reversible (sold disassembled from the knife)
Packaging: cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Overall in excellent condition, sheath lanyard slightly worn (detailed photo available)
* Availability: Discontinued, limited edition of 15 pieces
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Not included
* Sheath: Included
* Manuals, Certificates & Warranty: Not included
* Inspected and Certified by our internal laboratory

Japanese steel meets Italian excellence

For this 2021 collaboration between Coltelleria Collini of Busto Arsizio and Fox Knives of Maniago, we decided to offer the 609OD Bushman, an outstanding bushcraft knife produced by Fox Knives of Maniago, using high-performance Japanese V-Toku2 Sanmai steel (5mm) from Takefu Steel instead of the D2 steel used in the standard model.

Specifically, we used high-carbon V-Toku2 at 62/63HRC for the central core and stainless SUS410 for the outer layers, ensuring exceptional cutting ability, penetration, and edge retention. At the same time, the blade offers high corrosion resistance and increased toughness due to the laminated structure and external stainless steel.

Technical Specifications

Like the ancient swords of the Japanese Samurai.

The laminated steel—imported into Italy by Collini Steel directly from Takefu Steel in Japan—follows the ancient Japanese tradition of crafting legendary Samurai swords. As early as the 1100s, Japanese blacksmiths combined different materials to create Katana swords with incredible cutting power, strength, and flexibility, unmatched at the time. This revolutionary forging technique has allowed Samurai swords to survive to this day as some of the most fascinating objects ever created.

By applying this tradition to modern metallurgy, we now have technologically advanced steels that have been tested and widely used in knife-making by renowned brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, and more.

San Mai Steel Features: This consists of different types of metals fused together to create a composite steel that enhances and intensifies the individual strengths of each material:

• Longer-lasting cutting edge: High-performance, high-carbon core steels (VG10, CoS, Shiro) or sintered steels (SPG2) provide exceptional hardness and cutting performance after heat treatment.
• Increased toughness: Inspired by Japanese sword-making, the multi-layered steel is highly resistant to breakage due to the toughness of the core steel and the flexibility of the outer stainless steel layers.
• Improved corrosion resistance: The outer stainless steel layers provide high corrosion resistance. The galvanic combination of Takefu Steel’s materials further enhances resistance along the edge.
• Ease of reworking after heat treatment: Unlike standard steels, the outer layers retain some softness even after hardening, allowing for easier processing, drilling, and welding.
• Enhanced aesthetics: Multi-layered or Damascus-patterned knives are visually striking, elegant, and highly sought after by collectors worldwide.

For more information: Collini Steel

From the collaboration between FOX and WANDER TACTICAL comes the new URO. 

This knife combines a sturdy blade with an ergonomic handle, ideal for tackling a wide range of tasks. The handle design ensures a firm and secure grip even in cold or wet hand conditions proving to be an excellent choice both as a tactical tool and for outdoor activities.

Intended Use: Utility / Tactical / Outdoor

Production type: Industrial
Country of Production: Italy
Blade: Niolox 59/61HRC stainless steel with Acid Wash finish
Handle: Micarta
Blade Length: 155mm.
Blade thickness: 5.8mm.
Total length: 300mm.
Balance: advanced
Weight: 405g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Fox logos
Notes: design by Wander Tactical 

Fox Knives and designer Bob Terzuola announce an extraordinary Christmas 2024 limited edition series of the new Original Gangster, perfect for collectors and high-end knife enthusiasts.

This limited edition celebrates the Christmas spirit with an exclusive twist.

The Christmas Edition is distinguished by the materials used. The FatCarbon Dark Matter carbon fiber handle gives the knife unparalleled lightness combined with extraordinary strength. The blade, on the other hand, is made of satin-finished Elmax steel, a choice that ensures excellent cutting performance and wear resistance. 

Available in only 350 numbered examples on the blade and box, the Original Gangster Christmas Edition, will be the perfect gift for those who love quality without compromise.

Intended Use: Tactical/Sporting/Collection

Type of production: Industrial
Country of Production:Italy
Blade:Elmax steel 59/61HRC
Blade finish: satin-finished
Handle: FatCarbon Dark Matter with anodized titanium hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm.
Weight: 135g.
Closure: Liner lock
Clip: removable, anodized titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with “Terzuola” velcro patch
Notes: Design by Bob Terzuola - Limited and numbered edition on blade and box, only 350 pieces

The Metamorphosis, unveiled at the Atlanta 2023 Blade Show, represents a breakthrough in the knife world with its unique and innovative design. Its focal point is the central mechanism, which makes it distinctive and functional. The Finger Safe Opening System developed by Denis Simonutti and first used with the unique Radius model offers both safety and ease of movement. With the addition of the flipper, the Metamorphosis becomes not only a practical tool but also a fidget object, ideal for those who like to play with their knife in a fun way.

Intended Use: Sporting/Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless Damascus Super Dense Twist by Damasteel 59/60HRC
Blade Treatment: Hydrochloric Acid Bath
Handle: 3K carbon fiber with blue anodized titanium insignia, spacer and hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 230mm.
Weight: 125g.
Closure: Fingers Safe Opening System
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Fox Knives logos - vegan leather knife holder with zipper - warranty certificate
Notes: limited edition specimen, made in 300 pieces, numbered on blade, certificate and overbox

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available
* Sharpness: Factory, never resharpened
* Marks on blade: none
* Marks on handle: None
* Box: NOT present
* Sheath: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our internal laboratory

Intended use: Combat / All Round Utility

Blade: N690Co 59/60HRC stainless steel
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade thickness: 5mm.
Closed length: -
Total length: 315mm.
Balancing: On the guard branch
Weight: 285g.
Closure: -
Clips: -
Sheath: Modular in fiberglass, Nylon and Cordura with stainless steel cable cutter
Note: -

EASTWOOD TIGER is a knife that I designed with the intention of making it as indestructible as a tank. I tried to give the knife an old school shape while maintaining its tactical function. I gave it this name because I live in Oosterhout, a town whose name has been translated into English as Eastwood. - Gudy Van Poppel

Intended Use: Sporty

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel CPM-S90V
Blade finish: Coarse Stonewashed
Handle: Ziricote wood
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 227mm.
Thickness when closed: 14mm.
Weight: 165g.
Closure: Liner Lock
Clip: removable, stainless steel AISI 420J2B
Sheath: leather, felt and nylon pouch, zippered
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Ball bearing opening movement - Carson Flipper type opening system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States. 

The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.

The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip. 

The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"

Bob Terzuola 

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production:Italy
Blade:made of CPM-MagnaCut 59/61HRC steel
Blade finish: satin finish
Handle: black micarta with anodized titanium hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 130g.
Closure: Liner lock
Clip: removable, anodized titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob Terzuola

I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States. 

The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.

The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip. 

The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"

Bob Terzuola 

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: tianio acid stone washed
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 120g.
Closure: Liner lock
Clip: removable, titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob Terzuola

Explore the power of modernity and boldness with the OXYLOS FX-616 MB knife. Embodying the quintessence of contemporary combativeness and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a N690Co stainless steel blade that promises durability and strength, combined with a stone washed surface treatment for a rugged finish, the OXYLOS is ready to take on any challenge.

The black micarta handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.

Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hiking / Bushcraft / Utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in N690Co stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 273g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

Intended use: Tactical / Collection

Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug Marcaida

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Destinazione d'uso: sportivo/collezione

Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura:  Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo Gobbato

Intended Use: Sporting / Collection

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: In acceptable condition, shows several signs of wear and oxidation to the blade coating.
* Commercially available: Professionally resharpened.
* Marks on blade: several signs of use and oxidation marks that do not impair its functionality or undermine its sturdiness in use
* Marks on handle: normal signs of use.
* Box: absent
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Utility

Type of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of manufacture: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Japanese steel blends with Italian excellence

For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Technical features

Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.

Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Handle and screws: Stonewashed PVD Titanium and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version by Coltelleria Collini, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Steel D2 59/61HRC
Blade finish: Black Idroglider
Handle: G10 with aluminum spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 227mm.
Thickness when closed: 14mm.
Weight: 175g.
Closure: Liner Lock
Clip: removable, in stainless steel AISI 420J2B with Black Idroglider treatment
Sheath: leather, felt and nylon pouch, with zipper
Package: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

Intended use: Utility / Sub

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co 58 / 60HRC
Blade treatment: satin
Handle: TPR Thermoplastic Rubber
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 245mm.
Weight: 215g.
Sheath: in FRN and Nylon 1000D compatible M.O.L.L.E.
Packaging: cardboard box with Fox FKMD logos
Notes: Glass breaker in 420 stainless steel, interchangeable with aluminum cap included in the package. Developed in collaboration with MemoTek

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logos

Intended use: collection

Blade: 440A stainless steel
Lama Italia production
Handle: in mana-worked wood by Santa Fè Stoneworks
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 170mm.
Balancing: -
Weight: 83g.
Closure: Blade Lock
Clip:
Sheath:
Notes: knife produced around 1998 by Fox in collaboration with Santa Fè Stoneworks

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade Treatment: Acid Stonewashed
Handle and Hardware: Titanium anodized HDL
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

outdoor knife produced by Fox between the late nineties and 2004 - Sturdy and comfortable knife for camping and hiking use. This rare model is characterized by the coating of the blade with a titanium surface which technically increases the resistance to oxidation and to the thread holding. Complete with scabbard

Intended use: Sports

Blade: 440A stainless steel with titanium coating
Lama Italia production
Handle: pakkawood pledge
Blade length: 110mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 250mm.
Balancing: -
Weight: 285g.
Closure: Back Lock
Clip:
Sheath: Cordura sheath
Note: -

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-20CV 59/61HRC
Blade Treatment: Acid Stone Washed
Handle: Copper, Acid Stone Washed Titanium and Acid Stone Washed Titanium hardware
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thickness when closed: 11mm
Weight: 120g.
Closure: Frame Lock with stainless steel hinge
Clip: Acid Stone Washed titanium, billet machined
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Titanium version of the SURU Carbon Fiber model, winner of the Blade Show 2018 as "Overall Knife of the Year".

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-20CV 59/61HRC
Blade treatment: Blackwash
Handle: Carbon fiber "Artic Storm", Titanium PVD and Titanium PVD hardware
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thickness when closed: 11mm
Weight: 80g.
Closure: Frame Lock with stainless steel casement
Clip: PVD titanium, billet machined
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Titanium version of the SURU Carbon Fiber model, winner of the Blade Show 2018 as "Overall Knife of the Year".