Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: knife from 1992 in perfect mechanical condition and excellent aesthetic condition, showing only a few small scratches on the steel heads
* Available on the market: Out of production and difficult to find, model marketed in the 1990s
* Sharpness: Factory sharp
* Marks on blade: none
* Marks on handle: very small scratches/hairlines on the steel heads
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Buck 551, often known as “King Charles II,” is a vintage folding knife produced in the United States between the early and mid-1990s in limited quantities.

Appreciated by collectors and enthusiasts of historic American knives, it is a more compact version than other Buck models from the same period, designed for everyday use but with careful workmanship and reliable materials. 

The 420HC stainless steel blade offers good edge retention and corrosion resistance, while the laminated wood scales with polished steel bolsters give it a classic, understated look that echoes the style of traditional Buck knives.

Intended use: EDC / Sports / Hunting

Type of production: industrial
Blade: 420HC stainless steel
Blade finish: Satin
Country of manufacture: USA
Handle: steel bolsters and laminated wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 98mm.
Overall length: 168mm.
Weight: 70g.
Locking system: Back lock
Clip: -
Packaging: -
Notes: vintage knife from 1992, previously purchased, from a private collection

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

Buck 560BT Black Nitride XLTi Titanium is a collectible folding knife manufactured in the United States in 1993. This distinctive model combines high-quality materials with functional design, making it a sought-after piece by both collectors and knife enthusiasts.

This item comes from a private collection and is in excellent condition, featuring a flawless blade and a perfectly preserved handle. Supplied with its original packaging and leather sheath, it represents a rare opportunity for true Buck aficionados.

Type: Previously Purchased
Condition: Excellent
Availability: Discontinued since the late '90s
Sharpening: Factory edge
Blade marks: None
Handle marks: None
Packaging: Complete, original cardboard box with manufacturer logos
Sheath: Cordura
Manuals, Certificates and Warranties: Warranty certificates included
Inspected and Certified: By our in-house lab

Intended use: Collection
Production type: Industrial
Country of manufacture: USA
Blade: 425M stainless steel
Blade finish: Black nitride
Handle: Titanium with black nitride finish
Blade length: 95 mm
Blade thickness: Not specified
Closed length: 107 mm
Total length: 219 mm
Closed thickness: Not specified
Weight: Not specified
Locking mechanism: Lockback
Clip: Not present; supplied with original Buck nylon sheath
Packaging: Original Buck box
Notes: Limited edition 1993; titanium handle with black nitride finish; includes original Buck nylon sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: hand-made leather in good condition
* Manuals, Certificates and Guarantees: No
* Checked and Certified by our internal laboratory

Intended use: collection/sports

Type of production: Handcrafted
Blade production: Cambodia
Blade: mirror-finish DNH7 carbon steel
Blade treatment: brut de forge
Handle: wood and horn
Blade length: approx. 120mm.
Blade thickness: approx. 5.5mm.
Total length: approx. 250mm.
Balance: -
Weight: approx. 228g.
Lock: 1.5cm set back
Sheath: Handcrafted leather
Notes: -

Citadel Knives and Swords is a sword and knife manufacturer based in Phnom Penh, Cambodia. Despite the country's reputation as an exotic and remote location, the company is easily accessible, located close to the city's international airport. The workshop is modest but houses an impressive range of high-quality Japanese swords and knives.

Founded by Dominique Eluere in the 1990s, Citadel has combined the expertise of French and local craftsmen to produce blades that rival the best in the world. Eluere began by training Cambodian blacksmiths to make French table knives, later evolving into the production of Japanese swords.

The quality of Citadel swords is world renowned, thanks to the use of traditional Japanese techniques and a meticulous manufacturing process. Each katana is heat treated, creating a blade with varying hardness along the edge and spine, a hallmark of true katanas. The hilt is fully encased in high-quality stingray leather, a rarity compared to common panels.

Attention to detail extends to every element, with every component custom-made for each blade. This includes the tsuba (sword guard) and habaki (blade collar), both of which are hand-crafted and fitted, ensuring perfect fit and functionality.

In addition to katanas, Citadel also produces European swords and knives, maintaining the same philosophy of quality and functionality. Production is artisanal, with particular attention to polishing and finishing, often done by hand with sandpaper and whetstones.

Citadel is proud of its Cambodian roots, with local workers looking up to Eluere as a father figure and deeply involved in maintaining the company's high standards.

In short, Citadel Knives and Swords represents a perfect fusion of tradition, craftsmanship and innovation, offering products that are truly functional works of art. These tools, while expensive, represent an investment in quality and craftsmanship that is hard to match.

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

Intended use: sports / collection

Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -

Intended use: sports / collection

Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

Citadel - Nordic

These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.

Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.

aikuchi

processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

Intended use: collection / sports

Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Buck - Hunt Foldover 11100 - knife

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 122mm.
Total length: 215mm.
Thick when closed: 16mm.
Balance: -
Weight: 210g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -

These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.

Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.

Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.

These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.

Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.

Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 420HC
Produzione Lama: USA
Manicatura: Nylon e gomma Dynafle
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 262g.
Chiusura: -
Clip: -
Fodero: in nylon nero compatibile con sistema M.O.L.L.E.
Confezione: scatola di cartone 
Note: 

These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.

Intended use: collectible/sporting

Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aesthetics

Intended Use: Tactical

Type of production: Industrial
Country of Production: USA
Blade: 420HC stainless steel
Handle: Phenolic resin
Blade length: 145mm.
Blade thickness: 4.5mm.
Total length: 265mm.
Weight: 213g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

Type of production: Artisan
Country of production: Cambodia
Blade: in DNH7 carbon steel hand-forged with clay-selective hardening with 60 / 40HRC tempering
Habaki: in bronze
Tsuka: Magnolia wood and water buffalo horn, removable
Saya: Magnolia wood and water buffalo horn
Blade length: 175mm. (including habaki)
Total length: 278mm. (295mm. With scabbard)
Weight: 224g. without scabbard (306g. with scabbard)

Note: Since these are handmade knives and differ slightly in finishes from one another, the product you ordered may not be identical to the one represented in the images but may have minor color differences.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.

Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade