Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in acceptable condition; shows several signs of use on the blade finish, liners, and handle that do not compromise its use in any way
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: Several signs of use and wear
* Marks on handle: Several signs of use and wear
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Alpha Three model, an evolution of the Alpha Two, was designed by Dietmar Pohl in collaboration with police and special forces instructors from the H3 Training Division. This knife is engineered for heavy-duty use; thanks to its substantial size, it is well-suited for use while wearing gloves.

Intended Use: Utility / Multi-purpose
Manufacturing Type: Industrial
Blade: D2 steel
Blade Finish: Burnished
Handle: Zytel with internal burnished stainless steel liners
Blade Length: 113 mm
Blade Thickness: 5 mm
Overall Length: 260 mm
Thickness when closed: 18 mm
Balance: 1 cm rearward from the guard
Weight: 260 g
Closure: Back Lock
Packaging: -
Notes: equipped with a skull crusher / glass breaker on the back—knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

 

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new, never used, but missing the original packaging
* Commercially available: Discontinued
* Edge: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Missing - Will be shipped in a Spartan Blades box, but different from the original one
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

 

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who had been designing and crafting knives for his friends in the special forces for years, and Mark, who had always dealt with military and tactical gear during his time with the “Green Berets,” decided to combine their expertise and passion with the goal of building innovative and functional knives using the highest-quality materials and manufactured entirely in the United States.

 

Intended Use: EDC / Sports

Production Type: Midtech
Country of Manufacture: USA
Blade: CPM-S35VN stainless steel
Blade Finish: Stonewash
Handle: Stonewashed Titanium
Blade Length: 48 mm.
Blade thickness: 2 mm.
Closed length: 74 mm
Overall length: 121 mm.
Closed thickness: 7 mm
Weight: 36 g.
Closure: Integral Frame Slipjoint (two-handed opening and closing without blade lock)
Clip: Titanium
Packaging: Cardboard box with Spartan Blades logos
Notes: Winner of the 2014 Blade Show award for “Most Innovative American-Made Knife of the Year” – Knife previously purchased and withdrawn from a private collection

Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary combat readiness and aggressive design, this tool is much more than just a bushcraft knife—it’s an icon of innovation. Featuring an N690Co stainless steel blade that promises durability and strength, paired with a stone-washed surface treatment for a rugged finish, the OXYLOS is ready to tackle any challenge.

Its compact design and futuristic aesthetic capture the eye, embodying the essence of contemporary technology. The black micarta handle offers a secure and comfortable grip, while the stainless steel screws ensure sturdiness and durability. Complete with a leather sheath for safe and stylish transport, the OXYLOS is ready to be the ideal companion for outdoor adventure enthusiasts.

With a total length of 24 cm, a 13 cm blade, and a thickness of 5 mm, this knife is ready to tackle any challenge you may encounter on your outdoor adventures. Masterfully crafted in Italy, the OXYLOS is more than just a knife: it’s an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hunting / Hiking / Bushcraft / Utility

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, N690Co stainless steel
Blade Finish: Satin
Handle: Olive wood
Blade Length: 130 mm.
Blade thickness: 5 mm.
Overall length: 240 mm.
Balance: On the guard
Weight: 273 g.
Sheath: Leather, belt-mounted, ambidextrous, for horizontal or vertical carry
Packaging: Cardboard box with Fox logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Imperceptible signs of age and a couple of small spots of oxidation
* Handle Condition: Minimal signs of age
* Box: Included
* Sheath: Aftermarket, compatible, made in the USA
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Cold Steel SRK 38CSM San Mai Made in Japan is one of the most popular and sought-after versions of the famous Survival Rescue Knife (SRK), a model designed for military, survival, and professional outdoor use.

Manufactured in Japan using the renowned San Mai III construction, it combines a high-performance VG-1 steel core with tougher outer layers, offering an excellent balance of cutting ability, strength, and durability.

Thanks to its sturdy clip-point blade, Kray-Ex handle, and the high-quality craftsmanship typical of Cold Steel’s Japanese production, the 38CSM is now considered a modern classic, highly prized by both field users and collectors.

Intended use: tactical / sporting

Production type: Industrial
Country of manufacture: Japan
Blade: laminated stainless steel (San Mai) with VG-1 cutting edge
Blade finish: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Balance: on the guard
Weight: 249 g.
Sheath: aftermarket Cordura sheath, made in the USA
Packaging: cardboard box with Cold Steel logos
Notes: discontinued knife, previously purchased, from a private collection

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

 

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

 

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

The Bugout evolves and pushes its limits: this redesigned version is 33% slimmer and offers superior durability compared to the standard Bugout.

Built on a sturdy black aluminum frame with a Taiga Green rear spacer and matching thumb stud, it features a drop-point blade made of premium MagnaCut steel finished with a black Cerakote coating for a discreet yet bold look.

Lightweight, minimalist, and high-performance, it represents the essence of the Bugout, taken to the next level.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: CPM-MagnaCut steel at 60/62 HRC
Blade finish: Cerakote
Handle: Anodized 6061-T6 aluminum with rear spacer and Taiga Green thumb stud
Blade length: 82mm.
Blade thickness: 2mm.
Closed length: 107mm.
Overall length: 190mm.
Thickness when closed: 7.1 mm
Weight: 48.7 g
Closure: Axis Lock
Clip: Removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

The Gobbo Abruzzese knife by Piscitelli embodies the perfect fusion of Italian rural tradition and exceptional craftsmanship, a unique piece designed for those who love to carry a symbol of identity and quality with them. Made entirely in Italy, in the artisan workshop in Frosolone (IS), this model stands out for its elegant handle crafted from genuine cow horn and the characteristic “hump” shape of the handle, which evokes the historic pastoral heritage of Abruzzo.

The polished steel blade, with its sleek and clean profile, ensures a reliable tool both in your pocket and as a collector’s item. Ideal for those who love to carry a compact knife with a strong character, this Piscitelli model enhances every moment, from a walk in the countryside to an informal dinner, offering style, authenticity, and functionality.

Intended use: Collectible / Sports use

Production type: Handcrafted
Country of origin: Italy (Frosolone, IS)
Blade: 420 stainless steel
Blade finish: Polished
Handle: Genuine cow horn
Blade length: 97mm.
Blade thickness: 2.5mm.
Closed length: 125 mm.
Total length: 223 mm.
Weight: 75 g
Closure: Slip joint with rear retention spring
Packaging: Cardboard box with manufacturer’s logos and information sheet
Notes: Each horn handle is unique in grain and color; as it is handcrafted, there may be aesthetic variations

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: S600 carbon steel, 64 HRC
Blade finish: Exp Dark
Handle: S600 carbon steel, 64 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 106 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: MIL-C-13924 burnishing
Handle: N690Co stainless steel, 58 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 99 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: Stonewashed
Handle: N690Co stainless steel, 58 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 99 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

SATRE is a compact fixed-blade knife developed in collaboration with Daniele Dal Canto, a guide with the AIGS (Italian Association of Survival Guides). It was created to deliver high performance in a compact format, designed for survival, bushcraft, urban use, and as a backup tool. The range has been updated with new variants in high-visibility Nitrogen steel.

SATRE features a skeletonized full-tang construction that allows the handle to be wrapped in Paracord, adapting it to the user’s needs. Its compact size and the pre-formed black Kydex sheath, equipped with metal eyelets for ambidextrous, vertical, or horizontal carrying configurations on various mounts, make it suitable for use as a neck knife, backup knife, or primary tool in a survival kit.

The range now includes versions in Nitrogen steel (Orange and Yellow), characterized by high corrosion resistance, ease of resharpening, and high visibility in the field.

These are joined by models in N690Co steel (Black, Expeditions, and Stone Washed), a historic benchmark of the series for its overall balance between performance and operational handling, and the variant in Böhler S600 steel (64 HRC), designed for maximum hardness and edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

SATRE is a compact fixed-blade knife developed in collaboration with Daniele Dal Canto, a guide with the AIGS (Italian Association of Survival Guides). It was created to deliver high performance in a compact format, designed for survival, bushcraft, urban use, and as a backup tool. The range has been updated with new variants in high-visibility Nitrogen steel.

SATRE features a skeletonized full-tang construction that allows the handle to be wrapped in Paracord, adapting it to the user’s needs. Its compact size and the pre-formed black Kydex sheath, equipped with metal eyelets for ambidextrous, vertical, or horizontal carrying configurations on various mounts, make it suitable for use as a neck knife, backup knife, or primary tool in a survival kit.

The range now includes versions in Nitrogen steel (Orange and Yellow), characterized by high corrosion resistance, ease of resharpening, and high visibility in the field.

These are joined by models in N690Co steel (Black, Expeditions, and Stone Washed), a historic benchmark of the series for its overall balance between performance and operational handling, and the variant in Böhler S600 steel (64 HRC), designed for maximum hardness and edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Opinel x monbento Origines Lunch Kit

The Origines lunch kit is the result of a collaboration between monbento and Opinel, designed to make eating on the go simpler, more practical, and more sustainable.

This limited edition combines the expertise of two historic French brands in an elegant and functional set, designed to accompany you every day at the office, while traveling, during a picnic, or on outdoor adventures.

Premium materials—stainless steel and beech wood—come together in a contemporary design inspired by a return to the essentials and the conviviality of the nomadic meal.

What’s included in the Origines kit
1L Sense L Lunch Box

The Sense L Lunch Box is a lightweight, sturdy, and durable metal lunch container, designed to last and simplify meals on the go.

Features:

1-liter capacity
Durable and lightweight metal construction
Oven, microwave, and stovetop safe (without lid)
Comes with a beechwood cutting board
Reusable and ideal for daily use
Elegant and practical design

Thanks to its versatile design, the Sense L becomes an indispensable accessory for those seeking a sustainable alternative to disposable containers.

Opinel néo6 Pocket Knife

The néo6 is a compact and easy-to-handle pocket knife that reinterprets the iconic Opinel style with a contemporary twist.

Features:

7 cm stainless steel blade with a rounded tip
OPIFLEX® system that keeps the blade open or closed without locking it
Varnished beechwood handle
Leather lanyard
Compact, practical, and designed for everyday use

Perfect for picnics, lunch breaks, and outdoor activities, offering both practicality and safety.

“Origines” Design

The packaging and the knife are decorated with the “Origines” motif, inspired by cave drawings and symbols of nature.

These motifs evoke a return to the essentials: eating on the go with practical, elegant items built to last.

Technical Specifications
Product Name: Opinel x monbento Origines Meal Kit
Lunch Box Capacity: 1 L
Materials: stainless steel and beech wood
Limited Edition: 3,500 pieces
Usage: office, travel, outdoor, picnic

Forged from the legacy of Narsil, Isildur’s glorious sword, the Böker Plus Inarsil is the result of a collaboration between Jörg Sprave and Midgards Messer, a masterpiece of timeless charm. A symbol of hope and courage in Middle-earth, Narsil—whose name evokes Anar (Sun) and Isil (Moon)—was broken during the Battle of the Last Alliance, losing its ancient power forever.

With the Böker Plus Inarsil, that small flame shines once more in the form of a tactical folding knife whose aesthetics are inspired by great fantasy swords. The symmetrical single-edged blade, with a dagger profile, opens quickly and precisely via a ball-bearing-mounted flipper; once open, the flipper also acts as a guard, increasing safety and control during use. The central scabbard and refined satin finish further enhance the “sword-style” look.

Made of D2 steel, the blade guarantees high wear resistance and excellent edge retention, making the Inarsil a reliable companion for both daily use and the most demanding outdoor activities.

The ergonomic handle echoes the perfect symmetry of the tactical design. The weight-reducing milled sections and carefully engineered balance ensure a firm grip and dynamic handling. The front features black G10 scales, while the stainless steel back maintains a classic, robust elegance. The liner lock secures the blade safely and reliably.

To preserve the clean aesthetic inspired by legendary swords, the knife has no pocket clip; instead, a triangular hole on the pommel allows for the attachment of a lanyard.

Intended use: Collectible / Sport

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade finish: dual tone: satin and micro-beaded
Handle: stainless steel with G10 scales
Blade length: 117mm.
Blade thickness: 4.7 mm.
Weight: 432 g.
Overall length: 282 mm.
Clip: -
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jörg Sprave and Midgards Messer - ball-bearing flipper opening system

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

The No. 08 Champignon model is available in a black walnut version for an elegant and refined mushroom-picking experience.

This classic Opinel features a comfortable black walnut handle, accented with an orange Alcantara cord. It features an 8 cm curved stainless steel blade to facilitate harvesting, with a scraper on the back for cleaning mushrooms.

The natural bristle brush integrated at the end of the handle allows for easy dusting: the ideal tool for efficient and thorough harvesting.

This pocket knife comes in an elegant wooden case with a plexiglass window. 

 

Intended Use: Mushroom Picking

Production Type: Industrial
Country of Origin: France
Blade: Sandvik 12C27 Stainless Steel
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Blade Thickness: 2mm
Closed Length: 125mm
Total length: 200mm
Weight: 95g
Closure: Virobloc safety ring
Packaging: Wooden box with synthetic glass
Notes: Supplied with a high-visibility Alcantara lanyard - Fixed rear brush, made of natural bristles

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of surface oxidation and signs of aging, consistent with the untreated finish. The absence of a coating has allowed, over the years, the development of a natural patina and signs of oxidation that attest to the authenticity of its use. These elements reinforce its technical character and ensure its longevity.
* Commercial Availability: Discontinued
* Sharpening: Professionally resharpened
* Blade Markings: Surface oxidation and signs of aging
* Handle Markings: None
* Box: /
* Sheath: Handcrafted Kydex, made specifically for this knife
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

 

The Busse SARsquatch is one of the most iconic models in the Busse Combat Knife Company’s lineup, a direct expression of the design philosophy developed by Jerry Busse: maximum reliability, uncompromising construction, and proven performance in the field.

This specific 2008 Special Edition version stands out for its less common configuration, lacking a protective coating. A choice that at the time favored a more “bare and functional” approach, now particularly appreciated by the most experienced enthusiasts.

For many collectors and users, the SARsquatch represents one of those models that, during its production run, were difficult to find and even harder to purchase. An iconic piece from an era when Busse operated with limited availability and extremely high demand.

At the heart of the SARsquatch is the famous INFI steel, a proprietary alloy developed in-house by Busse, the specific composition details of which have been deliberately kept confidential over time.

In practice, INFI is recognized for: High resilience, suitable for intensive and heavy-duty use; Corrosion resistance superior to the average for non-stainless steels; Good edge retention, with ease of maintenance.

These qualities have helped build the brand’s reputation, making Busse models practical tools for real-world use.

This SARsquatch model is aimed at an audience that understands the value of the Busse project and the context in which it was born. It is not a pristine “collector’s item,” but an authentic knife, true to its operational nature.

It represents a tangible opportunity for those who, in the 2000s, followed the brand and appreciated its products but were unable to easily acquire them: today, it is possible to purchase an original piece, with a distinctive configuration and a history already written, ready to continue being used.

 

Intended Use: Heavy Duty

Production Type: Handcrafted
Country of Origin: USA
Blade: Full tang, INFI steel at 58/60 HRC
Blade Finish: Uncoated
Handle: Micarta with Raptor-style pattern, secured with 3 pin tubes
Blade Length: 185mm.
Blade Thickness: 5mm.
Overall length: 320 mm.
Balance: Guard-side balanced
Weight: 484 g.
Sheath: Handcrafted Kydex, made specifically for this knife; with modular attachment for vertical belt carry
Packaging: -
Notes: Knife from 2008, previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with superficial cosmetic marks on the finish caused by insertion and removal from the sheath
* Commercially available: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: Superficial cosmetic marks on the finish caused by insertion and removal from the sheath
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

Intended Use: Tactical/Military

Production Type: Industrial
Country of Manufacture: USA
Blade: CPM-S35VN stainless steel, 59/60 HRC
Blade Finish: Black SpartaCoat
Handle: Canvas Micarta with 3D texture
Blade Length: 130mm.
Blade Thickness: 4.8mm.
Overall Length: 254mm.
Weight: 217g.
Sheath: Nylon, M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: Design by Lovito/Carey - Knife from a private collection, previously purchased

In the forests of Orsa, pink sandstone has been quarried for over a thousand years, refining tools and shaping craftsmanship through the generations. Here, a tradition of skill and perseverance was born, where stone met steel and forged knowledge that lasts a lifetime.

The Color of the Year 2026, Orsa Sandstone and Dala Red, adorns the compact Eldris outdoor knife. The colors are inspired by the light, natural shade of sandstone meeting classic Dala red, a tribute to Morakniv's heritage and origins.

Intended use: Neck Knife / Backup

Production type: industrial
Country of production: Sweden
Blade: Sandvik 12C27 stainless steel 57/58HRC
Handle: ABS and non-slip rubber
Blade length: 53mm.
Blade thickness: 2mm.
Total length: 143mm.
Balance: rearward
Weight: 80g.
Sheath: ABS
Notes: Limited edition for 2026 in Dala Red and Orsa Sandstone colors

Intended use: Collection, display items, light everyday use
Type of production: Handmade
Country of production: Italy (Frosolone / Piscitelli workshop)
Blade: Stainless steel (polished)
Blade finish: Polished, hand-smoothed
Handle: Natural bovine horn (color tones may vary)
Blade length: 10 cm (9 cm sharp)
Blade thickness: 2.5 mm
Closed length: 12 cm
Total length: 22 cm
Closed thickness: 13.8 mm
Weight: 59 g
Locking system: “Pump” mechanism / release lever (internal spring)
Packaging: Standard cutlery box
Notes: The horn handle may vary in color and pattern due to its natural origin. The sharpening is entirely handmade.

Designed for tactical and outdoor versatility, the Atreides fixed blade knife offers an imposing presence with a sci-fi twist.

Its sturdy tanto blade, made of durable powder-coated 65Mn steel, offers durability for both intensive cutting and camping tasks. The knurling on the back improves control for precision work, while the thick tang and saber grind excel at cutting.

The overmolded handle can be removed to reveal a balanced skeleton frame. A versatile sheath system ensures safe transport and multiple mounting options, making the Atreides a reliable companion both in the field and in the unknown.

 

Intended use: all-round utility

Type of production: industrial
Country of production: China
Blade: 65Mn carbon steel
Blade finish: powder coating
Handle: polypropylene with anti-slip treatment
Blade length: 145mm.
Blade thickness: 4.7mm.
Total length: 290mm.
Balance: advanced
Weight: 230g.
Sheath: polypropylene
Notes: -

Intended use: Tactical / Sports

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Tigerstripe coating and Cerakote protective treatment
Handle: G10 OD Green with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8 mm.
Weight: 292 g.
Sheath: Kydex, with removable nylon belt attachment system
Packaging: cardboard box with Zero Tolerance logos
Notes: -

New version with Damax™ Damascus steel blade by Alleima, a new high-end industrial Damascus steel, obtained using an innovative technique that allows for the large-scale production of up to 135 layers of martensitic stainless steel. This material maintains the same quality and aesthetic appeal as handcrafted Damascus steel, but with an efficient, repeatable, and more accessible industrial process.

Production takes place in collaboration with Balbachdamast GmbH & Co. KG, a German company specializing in Damascus forging, creating the world's first industrial production of true Damascus steel. The new steel is suitable for multiple applications, from kitchen cutlery to outdoor cutlery.

Alleima, formerly Sandvik Materials Technology, is a global manufacturer of advanced stainless steels, special alloys, and industrial heating solutions, based in Sandviken (Sweden), with over 5,500 employees and customers in approximately 90 countries.

 

Intended use: Sports / Gentleman / Collection

Type of production: Industrial
Country of production: Italy
Blade: 120-layer Alleima Damax stainless Damascus steel
Blade finish: -
Handle: Beech burl
Blade length: 3.15 inches.
Blade thickness: 0.76 inches.
Closed length: 4.1 inches.
Total length: 7.2 inches.
Closed thickness: 0.5 inches.
Weight: 70g.
Opening: two-handed
Closure: slipjoint - simple spring
Clip: - 
Sheath: leather pocket case with Maserin logos
Packaging: Cardboard box with Maserin logos
Notes: Inspired by the “Marinera” knife, a typical vintage penknife from the city of Maniago

RAO STEEL is the outdoor knife to take everywhere: trekking, survival, camping, or simply in your backpack. 5 mm fixed blade, customizable grip, technical sheath.

Designed for those who don't seek fortune but rely on their equipment. Always reliable, everywhere. No compromises.

Derived from the legendary folding RAO, RAO STEEL distills its tactical essence into an even more compact and practical fixed blade version. A knife designed for action, designed to tackle nature and every need in the field. RAO STEEL cuts, carves, and splits.

From wood for lighting a fire to building a shelter, to the most precise tasks when camping or on daily excursions.

RAO STEEL NITROGEN SATIN
For those who love clean and essential functionality: high corrosion-resistant Nitrogen steel, easy to resharpen even with makeshift tools. Satin finish: perfect for outdoor contexts, even in food preparation. Ideal in humid, variable environments and on long journeys.

 

Intended use: Outdoor / Utility

Type of production: industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: monolithic, perforated, Nitrogen steel
Blade length: 87mm.
Blade thickness: 5 mm.
Total length: 190 mm.
Weight: 128 g.
Sheath: Kydex, ambidextrous, with double button loop attachment
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

RAO STEEL is the outdoor knife to take everywhere: trekking, survival, camping, or simply in your backpack. 5 mm fixed blade, customizable grip, technical sheath.

Designed for those who don't leave things to chance but rely on their equipment. Always reliable, everywhere. No compromises.

Derived from the legendary folding RAO, RAO STEEL distills its tactical essence into an even more compact and practical fixed blade version. A knife designed for action, designed to tackle nature and every need in the field. RAO STEEL cuts, carves, and splits.

From wood for lighting a fire to building a shelter, to the most precise tasks when camping or on daily excursions.

RAO STEEL N690 DARK STONE
For those seeking performance and operational simplicity: Böhler N690 steel (58 HRC) with MIL-C-13924 treatment and stone-washed finish. It hides wear and tear, works hard, and doesn't stand out. For those who leave nothing to chance, even in everyday life.

 

Intended use: Outdoor / Utility

Type of production: industrial
Country of production: Italy
Blade: full tang, N690Co stainless steel at 58HRC
Blade finish: MIL-C-13924 burnishing with Dark Stone finish
Handle: monolithic, perforated, N690Co stainless steel at 58HRC
Blade length: 87mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 130g.
Sheath: Kydex, ambidextrous, with double button loop attachment
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Experience the perfect blend of expertise and design with the KA-BAR Les George Cool Name, a fixed blade knife designed by award-winning knife maker and USMC veteran Les George. A model that represents his expertise gained in the field and a new chapter in the long history of KA-BAR.

Manufactured in the United States, the Cool Name is made of sturdy 1095 Cro-Van carbon steel, prized for its extraordinary toughness and ability to maintain its sharpness. Drop Point blade with durable black finish and flat grind for reliable performance in any situation.

The ergonomic transparent polycarbonate handle, with a honeycomb pattern, is lightweight and durable, with a translucent “smoke” finish, ensuring a firm grip and a unique look. Each knife comes with a Celcon sheath made in the USA for safe and practical carrying.

With optimal balance, the Cool Name is designed as a reliable work tool. More than a knife: a collaboration that brings veteran-tested design and American manufacturing quality to your hands.

 

Intended use: Bushcraft / Outdoor / All-Round Utility

Type of production: Industrial
Country of manufacture: USA
Blade: 1095 steel at 56/58HRC
Blade finish: Black Traction Coating
Handle: Smoke Honeycomb Transparent Polycarbonate
Blade length: 108mm.
Blade thickness: 4.8mm.
Overall length: 229mm.
Weight: 181g.
Sheath: Belt sheath, ambidextrous, Celcon
Packaging: Cardboard box with KA-Bar and Les George logos
Notes: Design by Les George

Dynamic, mystical, “toxic”: the Böker Plus Midgards Snake captures the senses and leaves no one indifferent. Never before has a fixed blade knife been designed with such skill to tackle any everyday cutting task.

Made entirely of steel, with a stonewashed D2 clip-point blade, it is a lightweight EDC that is always ready for use thanks to the included Kydex sheath. Cardboard, packaging, or ropes yield in an instant to the effective “toxicity” of its blade.

The filigree, sinuous, and enveloping handle offers a secure grip and comfort even in the most demanding jobs, allowing you to hold the knife between your fingers while both hands remain free for other activities. The ergonomics are further enhanced by the non-slip jimping on the thumb rest and the bottom of the handle, whose pointed shape resembles the rattles of a rattlesnake and acts as an emergency glass breaker.

The design is completed by a lanyard hole and a stainless steel clip for the Kydex sheath.

 

Intended use: Sports knife

Type of production: Industrial
Country of production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: -
Blade length: 115mm.
Blade thickness: 5.2 mm.
Total length: 236 mm.
Weight: 146 g.
Sheath: Kydex, with removable, multi-position belt loop
Packaging: cardboard box with Boker Plus logos
Notes: Design by Midgards Messer

The Socom Elite sets the highest standards for tactical/utility knives. Since the original Socom was introduced in 1996, it has been the pioneer of the entire Microtech folding knife line. Over the years, numerous improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows for easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended use: Tactical/Military

Production type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade finish: Dual Tone - Tactical Black PVD & Satin
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Closed length: 133mm.
Total length: 230mm.
Closed thickness: 13mm.
Weight: 149g.
Lock: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: Tungsten carbide glass breaker integrated into the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the original Socom's inception in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

The name Acha derives from the way it was constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different variants and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap.

 

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: PVD Stonewashed
Handle: Burlap Micarta SOLID, carved and machined from solid stock, with three-dimensionally milled PVD titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

The name Acha derives from the way it is constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different versions and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap. 

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: Satin
Handle: Burlap Micarta SOLID, carved and machined from solid material, with a three-dimensionally milled titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

The name Acha derives from the way it is constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different versions and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap. 

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: Satin
Handle: Burlap Micarta SOLID, carved and machined from solid material, with a three-dimensionally milled titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

Cold Steel Recon Tanto – Absolute reliability, wherever you need it.
With over 30 years of evolution behind it, the Recon Tanto has become a benchmark among combat knives. Its American Tanto-style design with reinforced tip offers power, precision, and maximum resistance even in the most extreme situations.

Used by special forces and SWAT units, it is designed for those who demand the best without compromise. Sharp, sturdy, ready to use. Try it and you'll understand why it should always be part of your equipment.

 

Intended use: Tactical/Sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balance: on the guard
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Cold Steel Recon Tanto – Absolute reliability, wherever you need it.
With over 30 years of evolution behind it, the Recon Tanto has become a benchmark among combat knives. Its American Tanto-style design with reinforced tip offers power, precision, and maximum resistance even in the most extreme situations.

Used by special forces and SWAT units, it is designed for those who demand the best without compromise. Sharp, sturdy, ready to use. Try it and you'll understand why it should always be part of your equipment.

 

Intended use: Tactical/Sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balance: on the guard
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

After skiing, cycling and hiking...
Climbing is now engraved on the handle of the traditional N. 08 pocket knife! 

The N. 08 Climbing has an 8.5 cm stainless steel blade with an excellent cutting edge. The handle is made of PEFC-certified Beech, painted and engraved.  The Virobloc safety ring allows the blade to be locked in the open or closed position. 

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Engraved beech wood
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

The iconic knife of the Alps meets the totem animal of our mountains! 
The No. 08 Marmot pocket knife has an 8.5 cm stainless steel blade. The handle is made of varnished and engraved oak. The Virobloc double safety loop locks the blade in the open or closed position. 

A must-have for nature lovers!

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Oak wood with engraving
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Uncompromising elegance
With its ebony handle, full-bodied and velvety to the touch, néo6 stands out for its refinement and comfort. A prestigious and functional pocket knife with an essential design and attention to detail.

The 7 cm stainless steel blade, with rounded tip, offers precision and safety in daily use. The discreet and practical natural leather strap completes it with a touch of elegance.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: African Ebony Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Mediterranean style, authentic soul
The Italian olive wood handle gives néo6 a warm and sunny character. Each pocketknife is a unique piece, thanks to the natural wood grain that enhances its authenticity. The 7-cm stainless steel blade with rounded tip provides safety and versatility in daily activities.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Italian Olive Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Fine materials, essential functionality
The elegant and timeless French black walnut handle gives néo6 a pleasant and natural grip. The ergonomic shape ensures comfort and control, while the leather strap adds a refined and practical detail for easy attachment.

 

Intended Use: EDC / Sporty

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

The CIVIVI Merit C24012-3 is a stylish and functional knife with an overall length of 193.5 mm and a low weight of 76.7 g for easy carrying.

The 14C28N blade, with 58-60 HRC hardness, offers excellent corrosion resistance and a durable edge, while the Flat Grind and Satin finish ensure precision cutting. The purple Canvas Micarta handle, combined with gray steel liner, ensures a secure and comfortable grip.

Ceramic bearing system allows smooth opening, with liner lock for added security. The ambidextrous Tip-Up pocket clip completes a practical and refined design, ideal for those seeking performance and style in a lightweight EDC.

 

Intended Use: Sporty / EDC

Production Type: Industrial
Country of manufacture: China
Blade: 14C28N stainless steel
Blade finish: satin-finished
Handle: Micarta
Blade length: 83.2mm
Blade thickness: 2.0mm
Length closed: 110.3mm
Total length: 193.5mm
Closure: liner lock
Weight: 76.7g.
Clip: removable and reversible, stainless steel
Packaging: cardboard box with manufacturer's logos, nylon zippered pouch, manuals and warranties
Notes: carson flipper opening system on ceramic ball bearings

Civivi's Maxwell model is a sturdy fixed-blade knife designed to deliver superior performance in any situation.

With a D2 steel blade and a hardness rating of 58-60 HRC, the Maxwell is ideal for those seeking a versatile and durable cutting tool. The blade's black stonewashed finish, with a spear point design, increases its wear resistance. The black G10 handle ensures a solid and comfortable grip, while the “T-Clip” carry clip, designed by renowned designer Bob Terzuola, allows for convenient and safe carrying.

Complete with a durable Kydex holster and black paracord lanyard, the Maxwell is perfect for those who need a sturdy, yet stylish and functional knife for any adventure or everyday need.

 

Intended Use: Sporting/Utility

Production Type: Industrial
Country of manufacture: China
Blade: full tang in D2 steel
Blade treatment: black stonewashed
Handle: in G10
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 259mm.
Weight: 266g.
Sheath: made of thermoformed kydex, with “T-Clip” hooking system by Bob Terzuola
Packaging: cardboard box with Civivi logos
Notes: -

The Hellfire is the result of a collaboration between Ka-Bar and the Tactical Defense Institute (TDI), thanks to which several models have been produced. With a prestigious addition: the world-renowned knife maker/designer Rick Hinderer.

Compact, robust, excellently balanced. The robust plastic sheath facilitates safe carrying and removal. A knife that well represents the concept of form made function.

Intended use: Tactical/Military/Collection

Blade: 1095 56/58HRC carbon steel
Handle: Ultramid
Blade length: 89 mm
Blade thickness: 4.9 mm.
Total length: 183 mm.
Balance: central, at the index finger recess
Weight: 127g. (200g. scabbard included)
Sheath: ABS
Packaging: cardboard box with Ka-Bar logos