Knife - Essential Tool for Camping, Outdoor Adventure and collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Provenance: 2008 knife acquired from a private seller, previously purchased
* Condition: Overall in excellent mechanical condition and good cosmetic condition; has a few small spots of oxidation on the carbon steel blade and some minor signs of wear on the guard and handle
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Small spots of oxidation
* Marks on the handle: A few minor signs of wear on the guard and handle
* Box: Sold in a nylon pouch with a zipper and embroidered manufacturer’s logos
* Sheath: Included and in excellent condition
* Manuals, Certificates, and Warranties: Warranty certificate with technical specifications and date of manufacture
* Inspected and certified by our in-house laboratory

Intended use: Collectible/sporting

Production type: Handcrafted
Country of origin: Cambodia
Blade: DNH7 carbon steel, selectively hardened to 40/60 HRC
Blade finish: Polished, with brut de forge sections
Handle: Buffalo horn
Blade length: approximately 135 mm.
Blade thickness: approximately 5.5 mm.
Overall length: approximately 247 mm.
Weight: approximately 178 g.
Lock: set back 1.5 cm
Sheath: leather
Notes: Previously purchased knife, from a private collection

A smaller version of the popular Boker Bronco, this impressive bushcraft knife creates unforgettable moments away from everyday life, from the first breath of clear morning dew to a crackling fire in the midst of unspoiled nature.

The drop-point blade with high-precision saber sharpening is made of CPM-3V steel, a carbon steel produced using powder metallurgy technology, renowned for its exceptional toughness, high impact resistance, and remarkable wear resistance. Although not stainless, it offers good corrosion resistance for its category and ensures excellent edge retention even in the most demanding uses. Cutting, carving, and even chopping are the unmistakable comfort zone of this outdoor knife.

To ensure maximum stability, the tang is full-length and protrudes a few millimeters from the end of the handle, so that it can easily withstand even powerful blows with round wood. A short section of the blade's back forms sharp 90-degree edges on both sides to make sparks with an optional fire starter. Thermoplastic elastomer (TPE) was chosen as the handle material, which completely encloses the tang and has a grippy texture.

TPE is durable, elastic, non-slip, and has low thermal conductivity. This means gentle and safe handling, with a perfect grip in all weather and working conditions. The Bronco Mini's natural shelter includes a Kydex sheath with clip for safe storage.

Intended use: Bushcraft / Outdoor / Utility

Type of production: Industrial
Country of manufacture: Germany - Solingen
Blade: CPM-3V steel ful tang
Blade finish: Satin
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: Kydex with removable belt clip 
Packaging: cardboard box with Boker Germany logos
Notes: -

The 915 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The drop point blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: full tang in M390 61/62HRC stainless steel with satin finish
Handle material: Walnut wood
Weight: 95g.
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 916 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The reverse tanto blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80 mm
Blade thickness: 3.3 mm
Blade material: full tang in M390 61/62HRC stainless steel with stonewashed finish
Handle material: Micarta
Weight: 95 g
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 915 Path, designed by Igor Bortolussi, is a compact fixed blade knife with a contemporary design, designed to offer great versatility of use and remarkable resistance. Made entirely in Maniago, it is designed to be a reliable cutting tool in any situation.

The drop point blade is made of M390 stainless steel, known for its excellent edge retention and corrosion resistance. The slim, ergonomic handle ensures a secure and comfortable grip.

The leather sheath with magnet system allows you to carry the knife in your pocket discreetly, with the blade completely covered, or with the handle exposed and ready for use.

The Path is an elegant and functional fixed blade knife, designed for those seeking uncompromising performance and style.

Intended use: Sports

Country of manufacture: Italy
Total length: 170mm
Blade length: 80 mm
Blade thickness: 3.3 mm
Blade material: full tang in M390 61/62HRC stainless steel with stonewashed finish
Handle material: Micarta
Weight: 95 g
Sheath: leather, with magnetic attachment system
Notes: Design by Igor Bortolussi

The 630 and 631 PULSE models designed by Igor Bortolussi are EDC folding knives that are “siblings,” sharing a common design vision but distinguished by the profile of the blade: curved for the 630, Tanto-inspired for the 631. The design, created in collaboration with Straightline EDC, combines soft lines and bold features in a modern, ergonomic, and essential synthesis.

The name PULSE—which evokes momentum and heartbeat—perfectly expresses the dynamic sensation you feel when holding these tools. Both models are equipped with the innovative W-Lock opening system, which ensures greater safety during use.

Intended use: Sports

Country of manufacture: Italy
Total length: 190mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: Micarta
Weight: 85g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal activation on the back of the knife)
Notes: Design by Igor Bortolussi

The 630 and 631 PULSE models designed by Igor Bortolussi are EDC folding knives that are “siblings,” sharing a common design vision but distinguished by the profile of the blade: curved for the 630, Tanto-inspired for the 631. The design, created in collaboration with Straightline EDC, combines soft lines and bold features in a modern, ergonomic, and essential synthesis.

The name PULSE—which evokes momentum and heartbeat—perfectly expresses the dynamic sensation you feel when holding these tools. Both models are equipped with the innovative W-Lock opening system, which ensures greater safety during use.

Intended use: Sports

Country of manufacture: Italy
Total length: 190mm
Blade length: 80mm
Blade thickness: 3.3mm
Blade material: CPM-MagnaCut 62HRC steel with stonewashed finish
Handle material: Micarta
Weight: 85g.
Pocket clip: removable and reversible, stainless steel
Screws: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal activation on the back of the knife)
Notes: Design by Igor Bortolussi

CIVIVI's Fixed Blade Elementum is a rugged and versatile knife designed to deliver high performance in any situation.

Featuring a D2 steel blade with 59-61 HRC hardness and a satin finish with hollow grind sharpening, the knife offers excellent cutting ability. The G10 handle ensures a secure and comfortable grip, while the T-Clip, designed by renowned designer Bob Terzuola, allows for convenient and safe carrying.

Complete with a durable black Kydex holster and black paracord lanyard, the Elementum is perfect for those seeking a high-quality fixed blade knife ideal for everyday use and outdoor adventures.

Intended Use: Sporting / Light Utility / Bushcraft

Production Type: Industrial
Country of Production: China
Blade: full tang in D2 steel
Blade treatment: Black Stonewashed
Handle: G10
Blade length: 101mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 138.5g.
Sheath: thermoformed kydex, with “T-Clip” hooking system by Bob Terzuola
Packaging: cardboard box with Civivi logos
Notes: -

CIVIVI's Fixed Blade Elementum is a tough and versatile knife designed to ensure high performance in any situation.

Featuring a D2 steel blade with 59-61 HRC hardness and satin finish with hollow grind sharpening, the knife offers excellent cutting ability. The dark green micarta handle ensures a secure and comfortable grip, while the T-Clip, designed by renowned designer Bob Terzuola, allows for convenient and safe carrying.

Complete with a durable black Kydex holster and black paracord lanyard, the Elementum is perfect for those seeking a high-quality fixed blade knife ideal for everyday use and outdoor adventures.

Intended Use: Sporting / Light Utility / Bushcraft

Production Type: Industrial
Country of Production: China
Blade: full tang in D2 steel
Blade treatment: Satin finish
Handle: Micarta
Blade length: 101mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 125g.
Sheath: thermoformed kydex, with “T-Clip” hooking system by Bob Terzuola
Packaging: cardboard box with Civivi logos
Notes: -

WeKnife's Sylox (WE24027-2) is an extraordinary knife that combines high-quality materials, refined design and impeccable performance.

With a blade made of high-hardness Bohler M390 steel (59-61 HRC), the Sylox offers exceptional cutting strength and a stonewashed and satin finish that enhances its aesthetics. The 6AL4V titanium handle with carbon fiber inserts adds lightness and strength, while the push-button locking mechanism ensures a secure and reliable lock.

With compact dimensions and an attractive design, the Sylox is perfect for those seeking a versatile and functional knife without sacrificing style.

Intended Use: Sporty/Collection

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel
Blade treatment: double finish, satin-finished and stonewashed
Handle: anodized titanium, with carbon fiber inserts
Blade length: 96.5mm.
Blade thickness: 3.2mm.
Length closed: 125mm.
Total length: 222mm.
Weight: 143g.
Closure: button lock
Clip: anodized titanium, machined from billet
Packaging: cardboard box with WeKnife logos, nylon case, warranty certificates
Notes: flipper opening system on ball bearings

The Minimalist Nessmuk is an outdoor knife designed to combine lightness with exceptional utility. Although the American conservationist who inspired the Nessmuk knife's name primarily valued functionality, expert blacksmith Alan Folts knows how to masterfully combine functionality and design.

With a sturdy D2 steel blade and a sleek, easy-to-grip micarta handle, the Nessmuk Minimalist stands out for its versatility: the practical sheath allows it to be worn around the neck, attached to a backpack, or attached to a belt.

With its pronounced curvature, sturdy tip and crescent-shaped blade design, the Nessmuk is a proven outdoor knife popular in the hunting, fishing and bushcraft communities for its versatile and efficient cutting ability. The sleek design, comfortable grip, and ability to handle all types of cutting make this lightweight knife the ideal companion for any outdoor adventure.

Intended Use: Light Utility / Neck Knife

Production Type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Stonewashed
Handle: Micarta
Blade length: 74mm.
Blade thickness: 3.7mm.
Total length: 152mm.
Weight: 74g.
Sheath: Nylon, for neck or with removable and repositionable belt loop
Packaging: cardboard box with CRKT logos
Notes: Design dy Alan Folts

The Minimalist Nessmuk is an outdoor knife designed to combine lightness with exceptional utility. Although the American conservationist who inspired the Nessmuk knife's name primarily valued functionality, expert blacksmith Alan Folts knows how to masterfully combine functionality and design.

With a sturdy D2 steel blade and a sleek, easy-to-grip micarta handle, the Nessmuk Minimalist stands out for its versatility: the practical sheath allows it to be worn around the neck, attached to a backpack, or attached to a belt.

With its pronounced curvature, sturdy tip and crescent-shaped blade design, the Nessmuk is a proven outdoor knife popular in the hunting, fishing and bushcraft communities for its versatile and efficient cutting ability. The sleek design, comfortable grip, and ability to handle all types of cutting make this lightweight knife the ideal companion for any outdoor adventure.

Intended Use: Light Utility / Neck Knife

Production Type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Stonewashed
Handle: Micarta
Blade length: 74mm.
Blade thickness: 3.7mm.
Total length: 152mm.
Weight: 74g.
Sheath: Nylon, for neck or with removable and repositionable belt loop
Packaging: cardboard box with CRKT logos
Notes: Design dy Alan Folts

This is the knife that represented lionSTEEL at the Atlanta 2024 Blade Show in the Manufacturing Quality Award competition; it was a challenging project to make. It is a button-lock knife that has both integral frame and handle (a “SOLID® squared”). The parts need to be milled with high precision so that they fit together perfectly ensuring both quality of operation and final aesthetics.

It features a satin-finished CPM MagnaCut steel blade, the frame is made of titanium while the handle is made of carbon fiber, Canvas or G10.

Being manufacturers and having innovation and improvement of quality standard as our goals, receiving the “Manufacturing Quality Award” with this closer was a great honor.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 62/63HRC steel
Blade finish: Satin finish
Handle: Titanium billet with carbon fiber insert
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 86g.
Closure: Button Lock
Clip: stainless steel, removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - IKBS ball bearing opening movement

This is the knife that represented lionSTEEL at the Atlanta 2024 Blade Show in the Manufacturing Quality Award competition; it was a challenging project to make. It is a button-lock knife that has both integral frame and handle (a “SOLID® squared”). The parts need to be milled with high precision so that they fit together perfectly ensuring both quality of operation and final aesthetics.

It features a CPM MagnaCut satin-finished steel blade, the frame is made of titanium while the handle is made of carbon fiber, Canvas or G10.

Being manufacturers and having innovation and improvement of quality standard as our goals, receiving the “Manufacturing Quality Award” with this closer was a great honor.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 62/63HRC steel
Blade finish: Satin finish
Handle: Titanium billet with green canvas micarta insert
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 86g.
Closure: Button Lock
Clip: stainless steel, removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - IKBS ball bearing opening movement

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: FatCarbon
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: FatCarbon
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

The 502 Power is a gentleman knife, created by one of our long-time collaborators, Sergio Consoli, a master of the knife art and above all one for whom creating knives is an art form. The lines of the 502 highlight the refined elegance and signature mark of a knife maker with a background as a technical designer. This new closer is lightweight, easy to handle, and assembled with fine materials. The CNC machining of the handle, in addition to giving the Fatcarbon version an excellent grip, further enhances the color facets. The 502 is a closer intended for those who like to stand out in style.

Intended use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel N690Co 59HRC
Handle material: G10
Weight: 90 grams
Pocket clip: removable, polished stainless steel
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Sergio Consoli

371 W2 is a gentleman knife brother of the 373 Tungsten, with one important difference: the blade is made of M390 steel with a satin finish and a prism sharpening line. It shares the handle shape with the 373 Tungsten, but is slightly heavier and was created to offer a wider audience the knife design idea that won the "Most Innovative Imported Design" award at BLADE SHOW 2023 - Largest Knife Show in the World - in Atlanta U.S.A.

Intended Use: Sporting

Country of manufacture: Italy
Total length: 185mm
Blade length: 80mm
Blade thickness: 3.2mm
Blade material: stainless steel M390 60HRC
Handle material: forged Fat Carbon fiber
Weight: 85 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti

The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.

The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.

Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.

Intended Use: Hiking / Hunting / Bushcraft

Production type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

Delightfully tactical - Alessandra De Santis/Hydra Design enchants knife enthusiasts around the world with the irresistible charm of the Boker Plus Kirke, inspired by the goddess of sorcery of the same name from Greek mythology. Despite its bewitching magic, the Italian knife designer stays true to its tactical line and keeps the pocket knife in a muted black color.

The ball-bearing-opening blade, made of Nitro-V steel with an austere black stonewash finish can be operated either in flipper or with the generous thumb opening, while the push-button lock ensures intuitive knife release.

Pronounced finger recesses, fine texture on the G10 handle grips and a thumb recess on the back of the blade ensure a secure grip at all times and a high level of safety at work, even in the most adverse conditions.

Intended Use: Sporting/Tactical

Type of production: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade treatment: stonwashed
Handle: G10
Blade length: 86mm.
Blade thickness: 3.8mm.
Total length: 201m.
Weight: 100g.
Clip: removable and reversible, stainless steel
Closure: Button Lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings - design by Alessandra De Santis

The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.

The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.

Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.

Intended Use: Hiking / Hunting / Bushcraft

Production type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.

The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.

Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.

Intended Use: Hiking / Hunting / Bushcraft

Production type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka Peltonen

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Intended Use: Utility

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Green Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;

- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany

- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.

The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.

TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.

The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.

These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -

Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.

A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

Intended Use: Rescue Tool / Utility

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso Rumici

On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.

The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.

Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition product

Intended Use: Sporting / Hunting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.

The 15002-1 Saddle Mountain Skinner is a premium hunting fixed blade knife designed for hunters around the world. Light, handy and robust, this knife is effective on medium / large game. The sheath, redesigned from the previous version, creates a slim, comfortable and safe housing. Improved geometry, ergonomics and materials used, this Benchmade model will not disappoint the expectations of even demanding hunters.

Intended use: Utility / Hiking / hunting

Type of production: Industrial
Production Lama: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: Satin
Handle: Richlite / Orange G10
Blade length: 106mm.
Blade thickness: 3.5mm.
Total length: 221mm.
Weight: 121g.
Sheath: in Boltaron® Thermoplastics
Packaging: Cardboard box with Benchmade logos
Note: -

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 420HC stainless steel
Handle: Phenolic resin
Blade length: 102mm.
Blade thickness: 3.5mm.
Total length: 209mm.
Weight: 122g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

For the fiftieth anniversary of the birth of Diabolik , one of the most loved by fans of comics noir , the cutlery Maserin , in collaboration with the publishing house Astorina , have created a version of " replica " of the famous knife throwing of the King of Terror . Weapon of choice by the character created in 1962 by the imagination of the Giussani sisters , the dagger "Diabolik Special Edition" Maserin replica of the features and style of the original knife , inseparable companion of many adventures Man of a Thousand Faces .

Type of production : Industrial
Production Blade: Italy
Blade: Stainless Steel 440 blunt
Treatment Lama : -
Handle material: TPE
Blade length : 160mm .
Blade thickness : 3.5mm .
Length closed: - mm .
Total length : 275mm .
Thick when closed: - mm .
Balance: -
Weight: 210g .
Closing: -
Clip: -
Sheath: nylon , Made in Italy , by Radar
Packaging : cardboard box with logos and Maserin Diabolik
Note : Product Exhibition / collectible officially licensed

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 130 mm.
Total length: 235 mm.
Blade Thickness: 3.5 mm.
Length Closed: -
Weight: 250g.
Closing: -
Sheath: Leather
Notes: -

Designed for field work and big-game hunting enthusiasts, the Buck Vanguard is a fixed-blade knife that combines tradition, durability, and reliability. A classic model from Buck, designed to confidently handle game preparation and processing thanks to its Drop Point blade, ergonomic handle, and safety guard that ensures optimal control during use.

The 420HC steel blade, subjected to a specific Buck heat treatment, offers an excellent balance between strength, ease of resharpening, and edge retention. The Heritage Walnut DymaLux® handle with brass accents gives the knife an elegant and traditional look, while maintaining a secure and comfortable grip even during prolonged use.

Made in the United States with select materials and meticulous craftsmanship, the Vanguard comes with a dedicated sheath: an indispensable companion for hunters, outdoor enthusiasts, and anyone seeking a sturdy, functional fixed-blade knife steeped in history.

Intended Use: Sports / Hunting

Production Type: Industrial
Country of Origin: USA
Blade: 420HC stainless steel
Blade Finish: Satin
Handle: Walnut with brass guard and pommel
Blade Length: 90 mm
Blade Thickness: 3.5 mm
Overall Length: 215 mm
Weight: 186 g
Sheath: Brown leather
Packaging: Cardboard box with Buck logos