Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the blade and a few imperceptible spots of oxidation
* Available on the market: Out of production and difficult to find
* Sharpness: Factory sharp
* Marks on blade: a few imperceptible marks on the blade and a few imperceptible spots of oxidation 
* Marks on handle: None
* Box: None
* Sheath: A couple of small marks from storage
* Manuals, Certificates, and Warranties: None
* Checked and certified by our in-house laboratory

The Temperance 2 is Spyderco's answer to the need for a medium-sized fixed blade knife for heavy-duty use. Designed in-house by Sal Glesser for camping, general use, and MBC (Martial Blade Craft), this versatile knife also has a place in the kitchen, where Sal himself uses it both indoors and outdoors.

Made from high-quality VG-10 stainless steel, it features a thick, wide blade with a spear-point profile and flat grind on both sides for excellent cutting performance. The knurling on the spine and finger choil ensure maximum control and precision, while the sturdy construction makes it ideal for survival, hunting, camping, and food preparation.

The Canvas Micarta handle provides a secure grip, excellent grip, and quick indexing during MBC techniques. The flat pommel acts as a leverage point for the thumb in reverse or rearward grips. The Temperance 2 comes with a Boltaron sheath and 5-position Tek-Lok for versatile carry.

Intended use: All-round utility/MBC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: satin
Country of manufacture: Japan
Handle: Canvas Micarta
Blade length: 124mm.
Blade thickness: 4 mm.
Total length: 247 mm.
Weight: 192 g.
Sheath: Boltaron, with multi-position Tek-Lok attachment
Notes: First series (2010/2015) of the Temperance 2 model; from the second series onwards, the sheath has been made of leather.

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife previously purchased, withdrawn from a private collection
* Condition: Like new, never used, never taken out of the box and never placed in the sheath.
* Commercially available: Hard to find with this particular briar handle
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present, new, never removed from plastic packaging still sealed.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The Bark River Bushcrafter II is designed to be the ultimate bushcraft knife. The name itself is no accident: careful research has led to an exceptional result that is appreciated by enthusiasts in the field. The blade has an ideal shape for bushcraft activities, while the handle offers excellent ergonomics. Compared to the standard model, the Bushcrafter II is slightly larger, with a blade over an inch longer.

Made of CPM 3V steel, the blade is extremely durable and retains its sharpness for a long time. However, it is not completely stainless, so it should be cleaned after use and occasionally oiled to prevent corrosion. The edge has a convex bevel, which is easy to maintain by sanding.

The handle is made of fine desert ironwood burl, a hardwood from the U.S. and Mexico, featuring an elegant grain that gives the knife a luxurious look. The leather sheath allows for both vertical (belts up to 2 inches) and diagonal carry.

Each Bark River knife is handcrafted and one-of-a-kind.

Intended Use: Hiking / Utility / Bushcraft

Country of manufacture: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burlwood
Blade length: 113mm.
Blade thickness: 4.1mm.
Total length: 233mm.
Weight: 205g.
Sheath: leather, belt
Notes: knife from a private collection, like new, never taken out of its box and never placed in the sheath

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new, never used, never removed from its packaging, and never inserted in the sheath
* Availability: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present
* Sheath: Present, with an additional new leather sheath
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our internal laboratory

The Bark River Aurora II is designed as the ultimate bushcraft knife, a result of extensive testing conducted by experts in North America and Europe. This outdoor knife, perfected through feedback received, is notable for its balance and versatility. The blade, made of CPM 3V steel, is renowned for its exceptional strength and its ability to retain an excellent edge over time. However, it is important to watch for moisture and acids, as CPM 3V is not completely stainless. Cleaning the knife after use and occasionally applying oil is recommended to ensure its longevity.

The Aurora II, significantly larger than the standard model, features a pointed tip ideal for detailed tasks and a spine suited for use with a fire starter. These characteristics make it an indispensable tool for outdoor activities.

The handle is made of desert ironwood, a hardwood appreciated for its color and unique pattern, giving the knife a luxurious look and improving grip. Each piece is handmade by Bark River, meaning that every knife is unique and may have slight variations compared to the images.

Intended Use: Hiking / Utility / Bushcraft

Country of Manufacture: USA
Blade: Full tang in CPM-3V carbon steel at 61 HRC
Handle: Desert ironwood
Blade Length: 140mm.
Blade Thickness: 3.85mm.
Total Length: 264mm.
Weight: 195g.
Sheath: Leather, with an additional leather sheath
Notes: Knife from a private collection, like new, never removed from its packaging and never inserted in the sheath, provided with an additional sheath, out of production and no longer available on the market

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

Microtech Socom knives are named after the U.S. Special Operations Command, abbreviated as Socom; an operational command under the U.S. Department of Defense Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does! Thanks to high-quality materials that can withstand all the rigors of the battlefield. Knives built to last.

The Microtech Signature Series line is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of premium materials and finishes: such as carbon fiber, copper, Damascus, and DLC.

Intended Use: Tactical/Sporting

Type of production: Midtech
Country of Production: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black DLC
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: made of Kydex Carbon Fiber, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the United States Special Operations Command, abbreviated to Socom; an operational command under the United States Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre with DLC treated screws
Blade length: 137mm.
Blade thickness: 4mm.
Total length: 265mm.
Weight: 212g. (273g. including scabbard)
Sheath: Carbon fibre Kydex, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: G10 Urban Camo
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: Kydex Carbon Fibre, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.

Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.

Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.

Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -

La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 238g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Type of production: industrial
Lama production: China
Blade: 3Cr13 steel
Blade treatment: satin finish
Handle: Pakkawood wood
Blade length: 300mm.
Blade thickness: 4mm.
Total length: 455mm.
Balancing: set back
Sheath: -
Packaging: in cardboard
Notes: Limited edition of 3000 pieces, each knife is numbered with certificate and supplied with a wooden plate to be displayed on the wall

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.

Uso previsto: Colección / Deportes

Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 238g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Note:

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Takeshi Saji - Miyabi Shikarigata knife - Knife custom

Intended Use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Sakura (cherry wood)
Blade length: 115mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closed: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Intended Use: Training

Type of production: Industrial
Production Country: Japan
Blade: Stainless steel AUS-6
Blade treatment: Satin finish
Handle: FRN
Blade length: 109mm.
Blade thickness: 4mm.
Overall length: 241mm.
Weight: 146g.
Sheath: Boltaron (plastic) with Tek-Lok coupling
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser - Exemplary discontinued and no longer available, one piece at our disposal

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Intended use: Tactical / Neck

Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, 64HRC Hitachi Shirogami carbon steel
Blade treatment: -
Handle: traditional Japanese, ray skin and rattan
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 184mm.
Thick when closed: -
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports

Production Type: Handmade
Production Blade: Japan
Blade: Hand forged, carbon steel Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: traditional Japanese rope
Blade length: 56mm.
Blade thickness: 4mm.
Length closed: -
Total length: 168mm.
Thick when closed: -
Balance: -
Weight: 80g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black rattan
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 146g.
Closing: -
Clip: -
Sheath: wood covered with rattan
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.

Intended use: Collection / Sports / Machete

Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Takeshi Saji - Koinobori - black carp skin - custom Knife

Intended Use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closed: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Purpose: Collection / Sportsman

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, Yoshoku laminated damper with cutting edge in Hitachi Aogami at 64HRC
Blade Treatment: -
Manicure: Koinobori (carp) and Tou-Maki (rattan)
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: -
Overall length: 207mm.
Closure thickness: -
Balance: -
Weight: 128g.
Closure: -
Clip: -
Sheath: in leather
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey