knives made in Italy

Extrema Ratio, on the occasion of the 10th anniversary of COM.FO.SE., presents a version in a limited series of only 70 pieces, "A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION". 

A.S.F.K. (Assault Special Forces Knife) is the dagger dedicated to and acquired by the Army Special Forces Command. This model recalls the tradition of arditism and the bloody trench battles punctuated by assaults with a bladed weapon. A.S.F.K. is a trench knife reimagined with a modern twist.

A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weatherproof, dustproof and shockproof. Inside is a metal plate with the numbering of the series limited to only 70 pieces.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing Geotech Camo
Handle: Forprene
Blade Length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balance: backward
Weight: 413g.
Sheath: cordura, M.O.L.L.E. compatible.
Packaging: thermoplastic collectible case with logos 
Notes: limited and numbered edition made in only 70 pieces

The Task series has been designed for all everyday cutting jobs.

The partially symmetrical blade with flat edge on both sides. The hollow part of the blade after the guard, which separates the sharp part from the handle, has been made to house the index finger during use, creating a grip point near the sharp part for better control while using the knife.

This feature, together with the support grip on the back of the knife, allows a better grip while avoiding the slipping of the hand on the blade. This allows you to carry out most cutting jobs with higher pressure.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Desert Warfare (Burnished with laser engraving)
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Weight: 275g.
Sheath: Cordura
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.

Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Invia commenti
Cronologia
Salvate
Community

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Regional

Type of production: Artisan
Lama production: Italy
Blade: carbon steel 1060
Blade treatment: -
Handle: buffalo horn with brass ring
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: 200mm.
Total length: 355mm.
Thickness when closed: -
Balancing: -
Weight: 238g.
Closure: -
Clip: -
Sheath: -
Package: -
Notes: single piece

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

Designed by David Repossini, instructor of Krav-Maga with decades of experience in martial arts and combat systems in the military, was founded with the purpose of joining a blade with a survival for the fight, trying to be more effective than high knives already in business. The result is the model Outlander, a tool that can be picked up and handled in six major ways and making it adaptable to different contexts.

It is effective both for heavy work, such as cutting of a branch, is for precision work, such as making out to light the campfire. In combattimentoè well balanced, maneggevle and forms that make it effective is to strike or engage, and to achieve the most sensitive parts in extension.

The variety of grips allows feasible to do many different techniques of combat systems also bringing together elements typical of the kukri and karambit.

Intended Use: Combat Survival

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: G10
Blade length: 165mm.
Blade thickness: 6mm.
Overall length: 295mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 466g.
Sheath: Nylon with leather loop
Packaging: Cardboard Box
Notes: designed by David Repossini

Fox - Coyote G10 Modras Dagger - Single Wire - FX-508 - knife

Intended use: Tactical / Military / Collectibles

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: PVD
Handle: G-10 Coyote
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Overall length: 330mm.
Thick when closed: -
Balance: Set back
Weight: 342g.
Closure: -
Clip: -
Sheath: leather, with attacks M.O.L.L.E.
Packaging: Cardboard box with logos FKMD
Notes: single-wire version

Fox - Modras G10 Black Dagger - Single Wire - FX-507 - knife

Intended use: Tactical / Military / Collectibles

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: PVD
Handle: G-10
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Overall length: 330mm.
Thick when closed: -
Balance: Set back
Weight: 342g.
Closure: -
Clip: -
Sheath: leather, with attacks M.O.L.L.E.
Packaging: Cardboard box with logos FKMD
Notes: single-wire version

Destination: Military/Tactic/Collection

Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -

COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: in condizioni pari al nuovo
* Reperibile in commercio Fuori produzione dal 2020
* Affilatura: Di fabbrica
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: Presente
* Fodero: Presente - Originale
* Manuali, Certificati e Garanzie: Certificato 
* Controllato e Certificato dal nostro laboratorio interno

La serie Task stata studiata per tutti i lavori di taglio di uso quotidiano.

La lama parzialmente simmetrica con arrotatura piana su entrambi i lati. La parte incavata della lama dopo la guardia, che separa la parte affilata dal manico, stata realizzata per alloggio del dito indice durante l'utilizzo, creando un punto di grip vicino alla parte affilata per un miglior controllo durante l'utilizzo del coltello.

Questa caratteristica, insieme al grip d'appoggio sul dorso del coltello, permette una miglior presa evitando al contempo lo scivolamento della mano sulla lama. In questo modo possibile effettuare la maggior parte dei lavori di taglio con una pressione superiore.

Destinazione d'uso: Tattico/Sportivo

Tipo di produzione: Industriali

Produzione Lama: Italia

Lama: in acciaio inox N690Co

Trattamento Lama: Testudo

Manicatura: Forprene

Lunghezza lama: 160mm.

Spessore lama: 6.3mm.

Lunghezza chiuso:

Lunghezza totale: 290mm.

Spessore da chiuso:

Bilanciatura:

Peso: 275g.

Chiusura:

Clip: Fodero: Cordura

Confezione: Scatola di cartone con loghi Extrema Ratio

Note: -

***************************************

FUORI PRODUZIONE

NOTA INFORMATIVA: questo prodotto è presente nel nostro database unicamente a scopo storico ed informativo, non ci risulta più in produzione e pertanto non è acquistabile. Per aggiornamenti: [email protected]

***************************************

Questo kombat è stato disegnato da Ivano Beltrame e realizzato insieme al maestro Danilo Rossi, fondatore della Calix Academy Europe Club, accademia il cui scopo è la divulgazione delle tradizioni italiane nel maneggio di armi bianche e bastoni.

Dalla Paranza siciliana, alla Puntatina, al sistema Zaccagno, alla Pizzica pugliese, alla Beidana valdese, al Falcet piemontese alla Britula friulana.
Dettaglio delle scelte tecniche:
l’impugnatura con l’elsa a proteggere la mano serve a far scivolare durante il combattimento la lama all’avversario, e ci siamo ispirati sempre per restare in ambito tradizionale alla coccia del fioretto italiano.
Il foro sulla lama serve a bloccare la lama dell’avversario e a disarmarlo non con una azione di forza ma di destrezza.Lo skull krash minimalista non serve tanto a rompere quanto a strisciare sull’avversario per disarmarlo o per far leva sui tendini sempre per una azione di disarmo.
Il nome Tinea si ispira al un famoso combattente italiano Ottaviano detto er più de Roma reso celebre dal film di Adriano Celentano “ Storie di donne e di coltelli”.La scelta dei materiali il pratico acciaio N690 e lo spessore 6mm ne garantiscono la robustezza in ogni situazione; è stato testato in prove estreme di foratura e taglio senza perdere efficienza.
Il manico in G10 oltre a garantire un ottimo grip e anche efficace conduttore in caso di scossa elettrica.
Al momento è disponibile con copertura teflon in grado di evitare sia in diurna che in notturna quelle situazioni di rifrangenza durante l'utilizzo.
Il fodero è stato studiato sia per attacco in cintura ma soprattutto da posizionare con un pettorale proprio in copertura ¾ del cuore con uno sgancio rapido per situazioni critiche, difficilmente i foderi posti in altre zone garantiscono una immediatezza di copertura in caso di attacco.

Destinazione d'uso: Militare/Tattico/Collezione

Tipo di produzione: industriale
Lama: 58-59HRC N690
Trattamento Lama: teflonata
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza totale: 295mm.
Bilanciatura: sul ramo di guardia
Peso: 370g.
fodero: in cordura con attacco ascellare
Note: Design by Danilo Rossi

The design of this military knife, sponsored by COFS (Special Forces Operative Command) in the person of General Bertolini, had already been suggested by some collectors of white weapons of the time. The restyling of the famous "paratrooper assault dagger mod. 1939 ", constitutes an important piece of Italian military history.

The knife, while borrowing the line, the structure and the proportions from the original, has been strengthened, enriched with functional modifications and made with materials with modern military specifications. The result of these few modifications is an extremely functional and effective dagger. The sheath is ankle-shaped to be worn as Italian paratroopers usually wear a bayonet.

The 39-09 COMBAT version is the compact version with 160mm blade and side sheath.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: MilSpec MIL-C-13924
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 284mm.
Thick when closed: -
Balancing: -
Weight: 305g.
Sheath: Nylon
Packaging: Cardboard box with ExtremaRatio logos
Note: -

After insistent requests from professional customers, Extrema Ratio decided to create a survival tool suitable for every situation.

Hence the Ontos, (from the Greek "la cosa") a pure, robust, heavy but compact field knife. A portion of the blade is serrated to have a part of the knife always sharpened and ready for use.

The nylon thigh sheath with M.O.L.L.E. he remains on the soldier even when in case of withdrawal he is forced to abandon the primary, heavy and tactical equipment. A pocket is fixed to the scabbard, also with the M.O.L.L.E. system, containing a survival kit that makes the Ontos a real survival knife; in addition a fluorescent stick (duration 12 hours) and a diamond sharpener.

The survival kit contains:
* container for water
* water purifying tablets
* nylon lanyard
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tool
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* lapis
* instructions for survival (in English).

Technical Data of the Knife:
BLADE LENGTH: 165 mm
TOTAL LENGTH: mm 298
BLADE THICKNESS: 6.3 mm
WEIGHT KNIFE: gr 400
TOTAL WEIGHT: 1000 gr
STEEL BLADE: BOHLER N690 (58HRC)
HANDLE MATERIAL: Forprene
DENTATION: YES
FINISHING / SURFACE TREATMENT: Testudo