bing

knives made in Italy

Shop By
Shopping Options
Brand
  1. Extrema Ratio 2items
  2. Fox Knives 2items
  3. Approved 4items
  4. Nilte 1item
  5. WanderTactical 1item
Less
Stock
  1. In Stock 3items
  2. Out of Stock 7items
Rating
  1. 5
    2items
Set Ascending Direction

10 Items

  1. Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available On order
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Packaging: Zip pouch, original
    * Scabbard: Leather, pocket size, original
    * Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
    * Checked and Certified by our in-house laboratory



    Intended use: sports/collection

    Type of production: handcrafted
    Country of production: Italy
    Blade: stainless steel M390 60/61HRC
    Blade finish: satin finish
    Handle: titanium
    Blade length: 176mm.
    Blade thickness: 2.5mm.
    Length closed: 99mm.
    Total length: 175mm.
    Weight: 64g.
    Closure: Frame Lock
    Clip: removable, titanium
    Scabbard: Leather pouch
    Packaging: Zip pouch and certificate of authenticity and warranty 
    Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collection

    AP-FRANK-TI
    €376.23
    Only 1 left
    Only 1 left
  2. ExtremaRatio - K1 Dobermann knife - XXV Anniversary - Limited Edition

    This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.

    The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.

    The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.

    The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.

    The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.

    The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.

    The K1 equipment is completed with a polypropylene case ‌, complete leather sheath and underarm shoulder strap.

    WEIGHT g.: 493
    WEIGHT OZ.: 17.39
    BLADE LENGTH (MM): 210
    BLADE LENGTH (IN): 8.26
    TOTAL LENGTH (MM): 351
    TOTAL LENGTH (IN): 13.81
    BLADE THICKNESS (MM): 6.3
    BLADE THICKNESS (IN): 0.25
    BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
    BLADE FINISH: SATIN
    BLADE GRINDING: FLAT EDGE
    HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUM

    ER-K1-D-LE
    €770.49
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  3. Nilte - Quiete - White Mirror Wash - 20pcs Limited Edition - knife

    COMFORTABLE TO WEAR !

    The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.

    PLEASURE OF USE

    The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.

    HIGH LIGHT

    The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .

    SCREW ANTI-SLIP

    In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .

    THE HOLE WITH WINGS WINGS PIVOT HOLE

    This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .

    CURVE LIFESAVER !

    Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .

    SAFETY FIRST !

    The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .

    THE NAME

    The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.

    Intended Use : Sport / EDC

    Type of production : Industrial
    Production Blade: Italy
    Blade: Sandvik 14C28N stainless steel
    Treatment Blade: Stone Wash
    Handle: G10
    Blade length : 64mm .
    Blade thickness : 3mm .
    Closed Length : 103mm .
    Overall length: 178mm .
    Thick when closed: 12mm .
    Balancing : the pin opening
    Weight: 60g .
    Closure: Pure Back Lock
    Clip: -
    Sheath: -
    Packaging: Cardboard box with logos Nilte , paracord , warranty
    Notes: First Production Run built in only 20 copies

    7287W
    €262.30
    Only 1 left
    Only 1 left
  4. Roberto Bernini - Fixed Hunter in Sambar Deer - PRIVATE COLLECTION - handcrafted hunting knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available On commission
    * Sharpening: Factory.
    * Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
    * Marks on handle: No.
    * Packaging: Zip pouch, original
    * Scabbard: Leather, handcrafted, original
    * Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
    * Checked and Certified by our in-house laboratory



    Intended use: hunting / collection

    Type of production: handcrafted
    Country of production: Italy
    Blade: stainless steel ATS-34 60HRC
    Blade finish: satin finish
    Handle: deer Sambar with stainless steel 416 guard
    Blade length: 87mm.
    Blade thickness: 4mm.
    Total length: 198mm.
    Weight: 80g.
    Sheath: handcrafted, leather, for vertical belt carry
    Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
    Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collection

    AP-BER-HCV
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  5. Lionsteel - T.R.E. Titanium - K390 Sprint Run - PRIVATE COLLECTION - TRE K390 - Knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously purchased and used.
    * Condition: Overall in good condition.
    * Commercially available Not available (limited run sprint run in K390 steel).
    * Sharpening: Re-sharpened
    * Marks on blade: Small marks, especially near the tip, left side
    * Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
    * Box: Present and original, in cardboard.
    * Scabbard: -
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory


    Intended Use: Sporting/Collection

    Type of Production: Industrial
    Country of Production: Italy
    Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
    Blade finish: Microbead blasted and matted
    Handle: Titanium
    Blade length: 74mm.
    Blade thickness: 3.5mm.
    Total length: 175mm.
    Weight: 74g.
    Closure: Titanium Frame Lock with steel clapper
    Clip: Titanium 6Al4V
    Packaging: Cardboard box with LionSteel logos
    Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collection

    LS-3K390
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  6. Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife

    Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.


    Intended Use: Collection / Sporting

    Country of manufacture: Italy
    Type of production: industrial
    Blade: stainless steel CPM-S30V 61-62HRC
    Blade finish: satin-finished
    Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
    Blade length: 80mm.
    Blade thickness: 3.5mm.
    Total length: 170mm.
    Balance: set back 1cm. from the lower guard branch
    Weight: 68g.
    Sheath: Made of kydex, with clip
    Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.

    Link to the HIDE project page directly on the website of Designer Tommaso Rumici

    FA-HIDE-CP20
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  7. Wander Tactical - Smilodon - Copper Brush & White G-10 - PRIVATE COLLECTION - handcrafted knife

    Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

     

    Type of Production: Handcrafted
    Country of Production: Italy
    Blade: D2 steel at 59/60HRC
    Blade Finish: Copper Brush
    Handle: G-10
    Blade Length: 180mm.
    Blade thickness: 6.5mm.
    Total length: 340mm.
    Balance: backward
    Weight: 605g.
    Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
    Packaging: -
    Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

    AP-SMIL-CBWG10
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  8. ExtremaRatio - N.K.1 Neck Knife - SanMai V-TOKU2 - Limited Edition - NK1 - Knife

    Japanese steel merges with Italian excellence

    For this 2021 collaboration, exclusive to Coltelleria Collini, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

     

    Intended Use: Neck Knife / Collector's Knife

    Type of production: Industrial
    Country of Production: Italy
    Blade / Handle: Full, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
    Blade finish: Satin finish
    Blade length: 40mm.
    Blade thickness: 3mm.
    Total length: 129mm.
    Weight: 55g.
    Sheath: Kydex, for neck.
    Packaging: Cardboard box with Extrema Ratio logos.
    Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - the central core of the blade and handle is made of carbon steel so it is recommended to wash/dry the knife very well after each use and protect the steel, during storage, with a light surface of lubricant to avoid rust and oxidation.

     

     

    As in the ancient swords of the Japanese Samurai.

    The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

    Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals individually taken:

    - Longer cutting edge life
    thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

    - Greater resilience
    Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

    - Improved corrosion resistance
    The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

    - Easy machining even after heat treatment
    Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

    - Improved aesthetic performance
    Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

    ER-NK1-CC
    €0.00
    Only -51 left
    Only -51 left
    Rating:
    100%
    5
    Out of stock
  9. Fox - Radius by D. Simonucci - Limited Edition Damascus & Carbon Fiber - FX-550DCF - knife

    Intended use: Collection

    Type of production: Industrial
    Country of production: Italy
    Blade: Damasteel Gysinge DS93X damascus stainless steel
    Blade treatment: -
    Handle: Carbon fiber and Copper
    Blade length: 75mm.
    Blade thickness: 4mm.
    Length closed: 110mm.
    Total length: 185mm.
    Weight: 115g.
    Closing: Fingers Safe Opening System
    Clip: Titanium machined from solid
    Packaging: box with Fox Knives, pouch with leather zip, part of the damask steel advanced by the production of the blade
    Notes: Limited edition made only in 15 numbered copies on knife and box - Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"

    FX-550DCF
    €844.26
    Only -50 left
    Only -50 left
    Out of stock
  10. Fox - Radius by D. Simonucci - Limited Edition Damascus & Black PVD Titanium - FX-550DTI - knife

    Intended use: Collection

    Type of production: Industrial
    Country of production: Italy
    Blade: Damasteel Damacore DC18N stainless steel damask
    Blade treatment: -
    Handle: Titanium with Black PVD treatment
    Blade length: 75mm.
    Blade thickness: 4mm.
    Length closed: 110mm.
    Total length: 185mm.
    Weight: 145g.
    Closing: Fingers Safe Opening System
    Clip: Titanium machined from solid
    Packaging: box with Fox Knives, pouch with leather zip, part of the damask steel advanced by the production of the blade
    Notes: Limited edition made only in 15 numbered copies on knife and box - Design by Denis Simonucci - Winner of the 2019 Blade Show in Atlanta as "Knife of the year" and "Imported knife of the year"

    FX-550DTI
    €868.85
    Only -50 left
    Only -50 left
    Out of stock
Set Ascending Direction

10 Items





ecommerce sicuro