Sport, Military and Collectible Knives | Coltelleria Collini

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Take it seriously: the Sumo is no joke! This oversized knife is the ultimate in practicality: it's easy to use, opens smoothly and offers an ambidextrous locking system that's easily operated with a simple, reliable pivot, and it's also particularly aesthetically appealing and packed with colorful details and accents.

The red ceramic-treated inner folders give an attention-grabbing pop, while the layered G10 offers great grip and plenty of hand room!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Darkwashed
Handle: made of layered G10, with liners and spacers made of red ceramic-treated steel
Blade length: 98mm.
Blade thickness: 3.3mm.
Length closed: 130mm.
Total length: 225mm.
Weight: 145g.
Closure: Pivot Lock (Axis Lock)
Clip: removable and reversible in painted stainless steel
Packaging: cardboard box with Gerber logos
Notes: -

Intended use: Sports

Type of production: industrial
Blade: full tang, in 7Cr17MoV stainless steel
Blade finish: Teflon coating
Country of production: China
Handle: aluminum
Blade length: 73mm.
Blade thickness: 4.5mm.
Total length: 148mm.
Balancing: backward
Weight: 170g.
Sheath: ABS with multi-position belt attachment
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Teflon coating
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper system

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 98mm.
Total length: 169mm.
Weight: 115g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to Gerber's technical and packaging choices (painted aluminum instead of anodized and poorly protected knife in its packaging), we point out that these articles, although they are new from the factory and come from the manufacturer, already present small imperfections and abrasions that undermine aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and G10
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 7Cr17Mov
Blade treatment: Stonewashed
Handle: Stainless Steel and Aluminum
Blade length: 97mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 216mm.
Weight: 150g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with Gerber logos
Note: -

Important notice: due to the technical and packaging choices of Gerber (painted aluminum instead of anodized and knife fixed with a plastic band in the cardboard box that physically "scrapes" the paint of the handle), we point out that these articles, although factory new and from the manufacturer, they already present small imperfections and abrasions that undermine their aesthetic perfection. We therefore recommend the purchase only to concrete users and we advise against buying them instead from collectors.

United - GH5027 Hibben Legacy Bowie knife -

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle material: Micarta
Blade length: 145mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 348g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben and Wesley Hibben

The Boker knives AK Series features a solid aluminum handle with great ergonomics. The 7Cr17MoV black finished stainless steel blade is partially serrated for great cutting performance. Every task which might come up will be handled with ease. The handle structure provides a very secure grip and makes the knife absolutely slip-proof under all conditions. Includes a sturdy nylon sheath.

Specifications:
Overall Length: 8.625" 
Blade Length: 3.5"
Weight: 7.4 oz.

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle: Wood
Blade length: 240mm.
Blade thickness: 5mm.
Length closed: -
Total length: 380mm.
Thick when closed: -
Balance: -
Weight: 540g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben

Fallkniven Tre Kronor TK4

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Zytel
Blade length: 70 mm.
Blade Thickness: 2.5 mm.
Total length: 165 mm.
Weight: 50 g.
Closure: BackLock
Sheath: Black Cordura

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather