Sport, Military and Collectible Knives | Coltelleria Collini

The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: China
Blade: Stainless steel 4034SS
Blade Treatment: Satin finish
Handle: Griv-Ex with non-slip Kray-Ex
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 116g.
Closure: Liner Lock with additional safety catch on right handle
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: -

Multi-purpose vegetable and fruit knife. Thanks to the wooden case (shirasaya), similar to the one used for the katana or the tanto, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: 420J2 steel
Japan blade production
Handle: cherry wood
Blade length: 105mm.
Blade thickness: 1mm.
Total length: 210mm.
Balancing: -
Weight: 36g.
Sheath: cherry wood sheath
Note:

Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.

Features:

coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel

History of the coin:

The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914

A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.

The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.

This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.

Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts. 
Plaque: Silkscreened wood with Game of Thrones® motif. 

From the dynamic universe of the "Blade" film comes this authenticated and officially licensed reproduction of the "Blade Trinity", directed from the final film in the trilogy.

This piece dating back to 2005 was designed directly from the original film studio prop and measures over 30cm in length. Every detail has been precisely replicated to satisfy even the most demanding collectors.

The 16.5cm long blade is made of mirror-polished 420 stainless steel and the handle features an antique silver plated finish with solid metal parts and a black rubber handle.

Each dagger is accompanied by a black enameled wood and stainless steel display stand featuring BLADE's logo medallion, from which the blade can be removed for display.

This collectible is a must for fans of the daytime vampire hunter, Blade, played by Wesley Snipes, in his final conflict against the vampires in the film "Blade Trinity", written and directed by David S. Goyer.

The United Cutlery GH5003 throwing knife set, designed by the legendary master knifemaker Gil Hibben, is an excellent choice for throwing enthusiasts and professionals. Each knife is made of 420 stainless steel, known for its strength and durability, and features a full tang skeletonized design, offering perfect balance and a secure grip. The sharp blade and aerodynamic shape ensure a stable trajectory and effective target penetration. The set includes three identical knives and a faux leather sheath, ideal for transport and storage. This kit is perfect for those looking to improve their accuracy with professional knives designed by an industry icon.

Set of three throwing knives with excellent performance designed by Gil Hibben. Accompanied by triple cordura scabbard.

Blade: 420 satin steel
Overall length: 220 mm.
Blade width: 110 mm.
Weight: 160 g.
Sheath: Black Cordura

Model Name: Navros Dagger
Edition: Limited, 1,500 serialized pieces
Manufacturer: United Cutlery Brands

Product Description:
This collectible dagger, known as the "Blade of Ancient Chaos", was once the weapon of the wizard Navros. Also known as the Wizard's Dagger, it features a hilt crafted from faux amber and solid metal handle parts with an antique silver plated finish. The pommel is adorned with twin hawk heads, while the spell of Evruc, Ancient One of the Fourth Age, is engraved on the blade.

Characteristics:

Blade length: 34.93 cm
Total Length: 52 cm
Handle Material: Solid metal, faux amber details
Finish: Antique silver plating on metal parts of the handle
Blade: Cast metal, bright nickel plated, unsharpened

Features of the Special Edition:

Handle Finish: Solid metal parts with 24-K gold plated finish
Figurine: Wooden display base with hand-painted figurine of Vaelen holding the Navros Dagger
Authenticity: Each piece is individually serialized and includes an art print signed by fantasy artist Kit Rae, plus a certificate of authenticity

Presentation:

The dagger is accompanied by an exclusive art print by Kit Rae, "The Blade of Navros", and a solid wood display stand.

Warnings:

Kit Rae products are high-quality collectibles produced exclusively by United Cutlery Brands. Beware of imitations; always check for the presence of the Kit Rae seal or logo to guarantee the authenticity of the product.
This dagger is not only a work of art but also a piece of imaginative history, making it a highly valuable collector's item for fans of the fantasy genre and high-quality blacksmithing.

Fallkniven Tre Kronor TK4

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Zytel
Blade length: 70 mm.
Blade Thickness: 2.5 mm.
Total length: 165 mm.
Weight: 50 g.
Closure: BackLock
Sheath: Black Cordura

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather