Sport, Military and Collectible Knives | Coltelleria Collini

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, never used for cutting, cosmetic abrasion marks on the finish caused by insertion and removal from the sheath
* Available on the market: Out of production and difficult to find
* Sharpness: Factory sharp
* Marks on blade: Cosmetic abrasion marks on the finish caused by insertion and removal from the sheath
* Marks on handle: None
* Box: None
* Sheath: Like new
* Manuals, Certificates, and Warranties: None
* Checked and certified by our in-house laboratory

Intended use: Tactical - Military

Type of production: Industrial
Blade: 420HC stainless steel
Blade finish: TiNi - Titanium nitriding
Country of manufacture: USA
Handle: TacHide, non-slip
Blade length: 175mm.
Blade thickness: 5.5 mm.
Total length: 314 mm.
Balance: on the guard
Weight: 332 g (636 g with sheath)
Sheath: ABS, with extraction safety
Notes: designed by Matt Larsen (Close Quarter Combat expert), William Harsey Jr., and Chris Reeve, renowned knife makers

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.

Intended Use: Collection / Hunting

Type of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent condition

Intended Use: Utility / Bushcrat / Hunting

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm. 
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -

Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:

The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.

The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.

Destination of use: Sportivo / Collezione

Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Rare pair of knives produced by United and designed by the renowned knives maker Gil Hibben. These knives come from a private collection and are in excellent condition, with original box but without sheath

United Kempo II UC1168
This model stands out for its unique features, suitable for Kenpo Karate enthusiasts. The UC1168 Kempo II knife, introduced in 1998 and later replaced by the Alaskan knife in 2003, features a Kenpo Karate emblem on the handle. The design includes a grip-enhancing angled guard, stylized after Kenpo's "Chinese Fist" grip for added stability and control. This knife measures approximately 31cm in total with an 18cm blade, made from stainless steel.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Weight: 521g.
Sheath: without sheath
Notes: original box, produced in 1998

The handle design and medallion make it a distinctive piece in any collection.

It comes in the original box, maintaining its impeccable condition, although it lacks a scabbard.

Pro Guide Hunter UC1203
The Pro Guide Hunter UC1203, dated 1999, is ideal for hunting and outdoor activities. This knife is manufactured by United Cutlery under the design expertise of Gil Hibben. The Pro Guide Hunter is recognized for its sturdy construction and ergonomic handle, which ensures comfort and efficiency during use. Like the UC1168, it is sold with its original box but without the sheath.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 235mm.
Weight: 207g.
Sheath: without sheath
Notes: original box, produced in 1999

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather

Intended Use: Tactical

Type of production: Industrial
Country of Production: USA
Blade: 420HC stainless steel
Handle: Phenolic resin
Blade length: 145mm.
Blade thickness: 4.5mm.
Total length: 265mm.
Weight: 213g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -