Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

The KA-BAR George Roscoe is a surprisingly sturdy and easy-to-handle daily carry fixed-blade knife designed by award-winning custom knifemaker Les George. Made entirely in the USA from 425 high carbon stainless steel, it is designed to offer reliable performance and great strength in everyday use.

The compact 46mm Wharncliffe blade and full-tang construction provide structural strength in a total length of just 105.4mm. Its small size and low weight (68g.) make it easy to carry, discreet and quick to use. The knife comes with a durable Celcon sheath with the Les George logo, designed to ensure safe retention and instant access.

The KA-BAR George Roscoe is therefore a compact yet extremely effective EDC, built in the USA to offer robustness and functionality well beyond its small size.

Intended use: Tactical / EDC

Type of production: industrial
Country of production: USA
Blade: full tang in 425 stainless steel
Blade finish: Stonewashed
Handle: stainless steel 425
Blade length: 46mm.
Blade thickness: 5.5mm.
Total length: 105mm.
Weight: 68g.
Sheath: in Celcon, neck, with loops that can be used on a belt
Note: Design by Les George

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: In excellent condition, shows a scratch of about 2.5 cm on the blade
* Commercial Availability: Hard to find
* Sharpening: Factory edge, can be improved
* Blade Marks: shows a scratch of about 2.5 cm on the blade
* Handle Marks: -
* Box: -
* Sheath: in excellent condition, complete
* Manuals, Certificates and Warranties: -
Checked and Certified by our in-house workshop

The Buck 192 Vanguard is a premium-quality hunting knife, made in the USA and designed to deliver outstanding performance in all outdoor situations. The ergonomic handle made of fine wood with brass fittings gives the knife a classic and sturdy appearance, while the drop point blade in 420HC stainless steel ensures a reliable and long-lasting cut.

192 - with hyphen: this model features the marking “192-”, a production detail found on Buck knives made in the 1990s. This makes the knife particularly interesting for collectors and fans of the American brand.

Blade length: 102 mm
Total length: 216 mm
Blade material: 420HC stainless steel
Handle: fine wood with brass bolsters and scales
Sheath: high-quality brown leather
Production: Made in USA

This knife is ideal for hunting, hiking, camping, or as a collectible item. The Buck 192 Vanguard combines functionality, design, and reliability in a single tool appreciated worldwide.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, never used for cutting, cosmetic abrasion marks on the finish caused by insertion and removal from the sheath
* Available on the market: Out of production and difficult to find
* Sharpness: Factory sharp
* Marks on blade: Cosmetic abrasion marks on the finish caused by insertion and removal from the sheath
* Marks on handle: None
* Box: None
* Sheath: Like new
* Manuals, Certificates, and Warranties: None
* Checked and certified by our in-house laboratory

Intended use: Tactical - Military

Type of production: Industrial
Blade: 420HC stainless steel
Blade finish: TiNi - Titanium nitriding
Country of manufacture: USA
Handle: TacHide, non-slip
Blade length: 175mm.
Blade thickness: 5.5 mm.
Total length: 314 mm.
Balance: on the guard
Weight: 332 g (636 g with sheath)
Sheath: ABS, with extraction safety
Notes: designed by Matt Larsen (Close Quarter Combat expert), William Harsey Jr., and Chris Reeve, renowned knife makers

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.

Intended Use: Collection / Hunting

Type of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent condition

Intended Use: Utility / Bushcrat / Hunting

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm. 
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -

Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:

The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.

The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.

Destination of use: Sportivo / Collezione

Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Rare pair of knives produced by United and designed by the renowned knives maker Gil Hibben. These knives come from a private collection and are in excellent condition, with original box but without sheath

United Kempo II UC1168
This model stands out for its unique features, suitable for Kenpo Karate enthusiasts. The UC1168 Kempo II knife, introduced in 1998 and later replaced by the Alaskan knife in 2003, features a Kenpo Karate emblem on the handle. The design includes a grip-enhancing angled guard, stylized after Kenpo's "Chinese Fist" grip for added stability and control. This knife measures approximately 31cm in total with an 18cm blade, made from stainless steel.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Weight: 521g.
Sheath: without sheath
Notes: original box, produced in 1998

The handle design and medallion make it a distinctive piece in any collection.

It comes in the original box, maintaining its impeccable condition, although it lacks a scabbard.

Pro Guide Hunter UC1203
The Pro Guide Hunter UC1203, dated 1999, is ideal for hunting and outdoor activities. This knife is manufactured by United Cutlery under the design expertise of Gil Hibben. The Pro Guide Hunter is recognized for its sturdy construction and ergonomic handle, which ensures comfort and efficiency during use. Like the UC1168, it is sold with its original box but without the sheath.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 235mm.
Weight: 207g.
Sheath: without sheath
Notes: original box, produced in 1999

Intended Use: Tactical

Type of production: Industrial
Country of Production: USA
Blade: 420HC stainless steel
Handle: Phenolic resin
Blade length: 145mm.
Blade thickness: 4.5mm.
Total length: 265mm.
Weight: 213g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -