Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Knife manufactured in 2010, acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with some signs of wear, especially on the sheath
* Available on the market: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: A few small signs of wear, visible against the light
* Marks on the handle: None
* Box: Present and complete
* Sheath: Present, with some minor signs of wear that do not compromise its use
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

Discontinued and increasingly difficult to find, the Chris Reeve Nyala is considered one of the most iconic and highly regarded fixed-blade knives in the Chris Reeve Knives lineup. Originally designed as a versatile hunting and outdoor knife, it represents one of the most successful interpretations of the modern field knife, combining clean lines, excellent ergonomics, and a full-tang construction designed to ensure absolute reliability.

Crafted from CPM S35VN steel and finished to the exceptionally high quality standards that have made the brand famous, the Nyala offers benchmark cutting performance, great durability, and a versatility that makes it ideal for outdoor use as well as for hunting.

Produced until 2020, the Nyala perfectly embodies Chris Reeve’s design philosophy: eliminating the superfluous to create a functional, durable, and uncompromising tool. Today, its limited availability on the market further enhances its appeal, making it one of the most sought-after models among both brand enthusiasts and collectors of contemporary custom and semi-custom knives.

Intended Use: Hunting/Sporting

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN stainless steel, 58/59 HRC
Blade Finish: Stonewashed
Handle: Brown canvas Micarta
Blade Length: 95mm.
Blade thickness: 4.5mm.
Overall length: 216mm.
Weight: 175g.
Sheath: Brown leather by G. Feller Casemakers
Packaging: Cardboard box with Chris Reeve logos; warranty certificates
Notes: 2010 knife previously purchased, from a private collection, full set

The KA-BAR George Roscoe is a surprisingly sturdy and easy-to-handle daily carry fixed-blade knife designed by award-winning custom knifemaker Les George. Made entirely in the USA from 425 high carbon stainless steel, it is designed to offer reliable performance and great strength in everyday use.

The compact 46mm Wharncliffe blade and full-tang construction provide structural strength in a total length of just 105.4mm. Its small size and low weight (68g.) make it easy to carry, discreet and quick to use. The knife comes with a durable Celcon sheath with the Les George logo, designed to ensure safe retention and instant access.

The KA-BAR George Roscoe is therefore a compact yet extremely effective EDC, built in the USA to offer robustness and functionality well beyond its small size.

Intended use: Tactical / EDC

Type of production: industrial
Country of production: USA
Blade: full tang in 425 stainless steel
Blade finish: Stonewashed
Handle: stainless steel 425
Blade length: 46mm.
Blade thickness: 5.5mm.
Total length: 105mm.
Weight: 68g.
Sheath: in Celcon, neck, with loops that can be used on a belt
Note: Design by Les George

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife from a private collection
* Condition: Like new
* Availability: Rare and hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: In excellent, complete condition
* Manuals, Certificates & Warranty: Ka-Bar
Inspected and certified by our in-house laboratory

The KA-BAR BK72 represents the ultimate evolution of a survival knife icon. As the heir to the famous Becker BK2/BK22, it retains their toughness and reliability while enhancing performance thanks to the premium CPM S35VN steel. Built full tang with a 6.35 mm thick blade, it offers outstanding strength and optimal handling.

The black micarta handle ensures a firm grip in any condition, while the available finishes — stonewashed or black DLC coating — provide a modern and functional aesthetic. A knife that combines durability, precision, and style, perfect for outdoor, survival, and professional use.

Intended use: survival / outdoor / heavy-duty
Production type: exclusive Knivesandtools edition (KA-BAR–Knivesandtools collaboration)
Country of origin: USA
Blade: CPM S35VN steel (full tang, 6.35 mm thick)
Blade finish: stonewashed (KABK72) or black DLC coating (KABK72BK)
Handle: black micarta
Blade length: approx. 13.2 cm
Blade thickness: 6.35 mm
Closed length: 107 mm
Overall length: approx. 270 mm
Closed thickness: estimated between 12–15 mm
Weight: approx. 435 g
Locking mechanism: fixed blade, no locking system
Clip: none (includes kydex sheath)
Packaging: original box
Notes: hardness approx. 58 HRC

The USMC Fighter model is our modern and improved version of the classic multi-purpose knife made famous by the United States Marines.

This fixed blade is 6.5mm thick and made of CPM-S35VN sintered stainless steel with Black DLC treatment, measures nearly 30cm. in total length, has G-10 grips with a three-dimensional machined surface, a two-piece Titanium guard with DLC treatment, and a billet Titanium pommel with DLC treatment.

This unique full tang design has all the advantages of a classic slide-over construction without compromising strength, as would be expected from a Medford! With handcrafted brown leather sheath, it is a true 21st century combat knife.

Intended Use: Tactical/Collection

Type of manufacture: MidTech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN steel
Blade Finish: Black DLC
Handle: Titanium Guard and Pommel, and G10 three-dimensionally machined grips
Blade Length: 170mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: set back 1cm from the guard branch
Weight: 508g.
Sheath: leather, belt, for vertical carry, handcrafted
Packaging: nylon pouch, with zipper closure and Medford logos, certificates of warranty and authenticity, cardboard box
Notes: designed and built by Greg Medford

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, sheath shows signs of time and has poor retention of the knife
* Commercially available: Discontinued and company no longer in operation.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, with signs of time and poor knife retention.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10, handcrafted
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: absent
Notes: Design by W. Harsey - knife previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, the sheath and box show some minor signs of time
* Commercially available: Discontinued and company no longer operating
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with some signs of time
* Scabbard: Present, with some signs of time.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: cardboard box with Fantoni logos, warranty certificate with technical specifications
Notes: Design by W. Harsey - knife previously purchased, from private collection

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio interno

Destinazione d'uso: Tattico/Collezione

Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory



The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.

Intended Use: Sporting/Collection

Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: in Kydex
Packaging: Wooden box with WRKT logos
Note: -

modern version of the classic USMC produced by Medford

Intended use: Tactical / Collection

Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg Medford

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Destinazione d'uso: Caccia/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -

Destinazione d'uso: Tattico/Collezione

Tipo di produzione: industriale
Lama: in acciaio inox CPM-S35VN a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 90mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata a 2 cm. dal ramo di guardia inferiore
Peso: 124g.
Chiusura: -
Clip: -
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by W. Harsey

Spartan Blades - Black CQB Tool knife - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Black SpartaCoat
Handle:
Blade length: 60mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 170mm.
Thick when closed: -
Balance: -
Weight: 58g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes:

Dopo oltre 40 anni di servizio nella US Army Special Forces, Curtis Iovito e Mark Carey fondano nella North Carolina la Spartan Blades LLC.

Curtis, che già da anni progettava e disegnava coltelli per gli amici nelle forze speciali e Mark, che da sempre si occupava di attrezzature militari e tattiche quando lavorava nei "Berretti Verdi", decidono di unire le loro competenze e la loro passione con l'obiettivo di costruire coltelli innovativi e funzionali utilizzando materiali di altissimo livello qualitativo e interamente fatti negli Stati Uniti.

Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 59/60HRC
Trattamento Lama: Flat Dark Earth SpartaCoat
Manicatura: 
Lunghezza lama: 60mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 58g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: -
Note: 

Spartan Blades - Phrike - Self-Defense Utility Desert - Knife

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: G-10
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Total length: 215mm.
Thick when closed: -
Balance: -
Weight: 115g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

The Spartan-Breed Fighter/Dagger is our first collaboration with knife maker, writer, and retired Green Beret, MSG(R) Kim Breed. The Breed Fighter/Dagger was produced with the goal of creating a sturdy fighter in the spirit of our Special Operations Forces. Daggers have come to symbolize the elite of our military special operations units and agencies since the forming of the OSS. In that spirit, we worked with Kim to create a fighter/dagger that could be used while conducting missions on the modern battle field.
The blade allows for deep penetration, all while allowing the user to index the blade by touch and feel. The ergonomic and textured micarta handle is specifically designed with comfort and confidence in of grip.
Note: Double edge may be ordered with an unsharpened on top edge to comply with some state and/or local laws, please insure you follow the laws of your state and locality when ordering this knife.

 
Specifications:
Knife Name:  Spartan-Breed Fighter-Dagger
Designer:  Kim Breed
Overall Length:  11"
Blade Length:  5.5"
Blade Thickness:  3/16"
Blade Steel:  CPM S35VN
Blade Hardness:  58-60 HRC
Blade Style:  Full Tang Dagger— Flat saber grinds with optional unsharpened top edge.
Coating:  SpartaCoat - Black PVD - Tungsten DLC or Flat Dark Earth - ZrN
Handle Material:  3D Contoured CE Canvas Micarta® Black or Green
Weight:  8.13 Oz
 
Note:  Please select blade color, double or single edged, sheath type/color and handle color before adding to cart

The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve

Intended use: Fighter / Tactical

Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranks

Destinazione d'uso: Caccia/Sportivo

Tipo di produzione: Midtech
Paese di produzione: USA
Lama: full tang In acciaio inox CPM-S35VN 58/59HRC
Finitura lama: Stonewashed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza totale: 216mm.
Peso: 175g.
Fodero: in Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone con loghi Chris Reeve; certificati di garanzia
Note: -

The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so we can offer greater design freedom. Fully ambidextrous, the Ti-Lock does not want to be a mere exercise in style, but must be understood as an innovation and mechanics as a solid and reliable evidence of the passion of Chris Reeve and Grant and Gavin Hawk.

Intended Use: Sport / Collection

Type of production: Semi-Craft
Production Lama USA
Blade: stainless steel CPM-S35VN 58/59HRC
Treatment Blade: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Closed Length: 100mm.
Total length: 182.5mm.
Thick when closed: -
Balance: -
Weight: 85g.
Closure: Ti-Lock Titanium 6AI4V
Clip: Titanium 6AI4V
Sheath: -
Packaging: Cardboard box with logos Chris Reeve
Notes: Design by Grant and Gavin Hawk

Target: Tactical / Military

Type of production: Semi-Industrial
Blade Production: USA
Blade: Stainless steel CPM-S35VN 59 / 60HRC
Blade Treatment: Black SpartaCoat
Manicure: Micarta Canvas with 3D machining
Blade Length: 130mm.
Blade thickness: 4.8mm.
Closed length: -
Total length: 254mm.
Closure thickness: -
Balance: -
Weight: 217g.
Closure: -
Clip: -
Sheath: in Nylon, with MOLLE attachments
Packing: -
Notes: Design by Lovito / Carey

Intended Use: Neck / Tactical / Military

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: -
Blade length: 68mm.
Blade thickness: 4.8mm.
Length closed: -
Total length: 159mm.
Thick when closed: -
Balance: -
Weight: 80g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Intended Use: Neck / Tactical / Military

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Black SpartaCoat
Handle: -
Blade length: 68mm.
Blade thickness: 4.8mm.
Length closed: -
Total length: 159mm.
Thick when closed: -
Balance: -
Weight: 80g.
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey