Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Knife manufactured in 2010, acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with some signs of wear, especially on the sheath
* Available on the market: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: A few small signs of wear, visible against the light
* Marks on the handle: None
* Box: Present and complete
* Sheath: Present, with some minor signs of wear that do not compromise its use
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

Discontinued and increasingly difficult to find, the Chris Reeve Nyala is considered one of the most iconic and highly regarded fixed-blade knives in the Chris Reeve Knives lineup. Originally designed as a versatile hunting and outdoor knife, it represents one of the most successful interpretations of the modern field knife, combining clean lines, excellent ergonomics, and a full-tang construction designed to ensure absolute reliability.

Crafted from CPM S35VN steel and finished to the exceptionally high quality standards that have made the brand famous, the Nyala offers benchmark cutting performance, great durability, and a versatility that makes it ideal for outdoor use as well as for hunting.

Produced until 2020, the Nyala perfectly embodies Chris Reeve’s design philosophy: eliminating the superfluous to create a functional, durable, and uncompromising tool. Today, its limited availability on the market further enhances its appeal, making it one of the most sought-after models among both brand enthusiasts and collectors of contemporary custom and semi-custom knives.

Intended Use: Hunting/Sporting

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN stainless steel, 58/59 HRC
Blade Finish: Stonewashed
Handle: Brown canvas Micarta
Blade Length: 95mm.
Blade thickness: 4.5mm.
Overall length: 216mm.
Weight: 175g.
Sheath: Brown leather by G. Feller Casemakers
Packaging: Cardboard box with Chris Reeve logos; warranty certificates
Notes: 2010 knife previously purchased, from a private collection, full set

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In good condition, shows signs of wear on the titanium and a small mark on the blade that does not compromise its use
* Available on the market: Available to order from the manufacturer in different technical configurations
* Sharpness: Factory sharp
* Marks on blade: a small mark on the blade, possibly due to an impact or a fall
* Marks on handle: several signs of wear on the titanium
* Box: -
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collectible/Sporting

Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium and Bocote
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 156mm.
Weight: 40g.
Closure: Frame Lock
Clip: Titanium
Notes: Mnandi means “very beautiful” in Zulu - knife previously purchased and used

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, a couple of small cosmetic marks of use on the tip of the blade
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small cosmetic marks of use on the tip of the blade
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Demko Knives AD20.5 is a high-quality folder offered at a very competitive price. Fun to use and practical for everyday use, it owes much of its appeal to the innovative Shark Lock: a radical system that guarantees a secure blade lock, keeping your fingers safe at all times.

The mechanism is activated by pulling back the “fin” with your thumb or index finger, in a movement similar to that of a flipper opener. Once opened, the blade locks securely and the fin becomes a comfortable thumb rest, complete with jimping for superior control. Additional jimping on the back of the blade and an optional high grip further enhance the handling and versatility of this folding knife.

The AD20.5 represents the perfect balance that every EDC seeks to achieve, and will easily earn a permanent place in your pocket as soon as it enters your collection.

Intended use: Sports/Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S45VN steel
Blade treatment: Stonewashed
Handle: Carbon fiber
Blade length: 82mm.
Blade thickness: 3.2mm.
Total length: 195mm.
Weight: 98g.
Closure: Shark-Lock
Clip: Stainless steel
Packaging: Transparent plastic box with Demko logos
Notes: Design by Andrew Demko - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE FROM A PRIVATE COLLECTION
* Provenance: PDT YouTube channel.
* Condition: Overall in very good condition.
* Commercially available: By catalog
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Small signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sport/Utility

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin finish
Handle: OD Green G10
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.

WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collection

Type of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 2015 NOS new old stock - New from stock
* Condition: Like new, never taken out of original packaging.
* Commercially available: Hard to find
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory




Intended Use: Sporting / Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade finish: stonewashed
Handle: Titanium 6AI4V
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 17mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Packaging: white cardboard box with Chris Reeve logos, Warranty certificates
Notes: NOS knife, new from stock - Includes box and certificates

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Destination of use: sports / tactical

Type of production: industrial
Country of production: USA
Blade: full tang, stainless steel CPM-S35VN, 61HRC
Blade treatment: two tone: satin & stonewashed
Handle: black canvas micarta
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 251mm.
Balancing: on the guard branch
Weight: 206g.
Sheath: in kydex, multiposition, with Tek-Lok type connection
Packaging: cardboard box with Sog Knives logos
Note: -

Purpose: Sportsman / Collectibles

Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Cutlery Collini is an authorized dealer of products knives Rick Hinderer

Use: Tactical / Collection

Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -

Intended use: Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Weight: 124g.
Closing: framelock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - Design by Les George - Opening KVT on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: DLC Coating
Handle: G10 Orange and Titanium DLC Coating
Blade length: 91mm.
Blade thickness: 3.6mm.
Closed Length: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Weight: 178g.
Lock: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - in collaboration with Emerson Knives - patented opening system Wave

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 123mm.
Overall length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel S35VN
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance - Les George Folder Titanium - ZT0900 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: stonewash
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 124g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Les George - Opening KVT ball-bearing

Intended use: Collection / Sports

Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium and Radica
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 91mm.
Total length: 156mm.
balance:
Weight: 40g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: Leather
Notes: Production certificate included: production date July 30, 2013 - Mnandi in Zulu means "very nice"

Destinazione d'uso: Collezione/Sportivo

Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio ed Ebano
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: Certificato di produzione incluso: data di produzione 23 luglio 2012 - mnandi in zulu significa "molto bello"

Destinazione d'uso: Caccia/Sportivo

Tipo di produzione: Midtech
Paese di produzione: USA
Lama: full tang In acciaio inox CPM-S35VN 58/59HRC
Finitura lama: Stonewashed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza totale: 216mm.
Peso: 175g.
Fodero: in Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone con loghi Chris Reeve; certificati di garanzia
Note: -

Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.

Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes

Microtech - SF M / A Stone Washed - knife

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design

Intended Use: Neck / Tactical / Military

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Flat Dark Earth SpartaCoat
Handle: -
Blade length: 68mm.
Blade thickness: 4.8mm.
Length closed: -
Total length: 159mm.
Thick when closed: -
Balance: -
Weight: 80g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Intended Use: Neck / Tactical / Military

Type of production: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN 59/60HRC
Treatment Blade: Black SpartaCoat
Handle: -
Blade length: 68mm.
Blade thickness: 4.8mm.
Length closed: -
Total length: 159mm.
Thick when closed: -
Balance: -
Weight: 80g.
Sheath: Kydex
Packaging: -
Notes: Design by Iovito / Carey

Winner of "American year knife" to Blade Show 2007.

The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.

Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity

Cold Steel Espada Extra Large CPM‑S35VN is the ultimate high-performance design for those seeking an imposing yet elegant folding knife. Inspired by the tradition of the Spanish navaja, this modern “pocket sword” combines premium CPM‑S35VN steel with robust and refined construction: mirror-polished blade, G‑10 handle, and polished 7075 aluminum frame. Thanks to the patented Tri‑Ad Lock mechanism, the Espada XL offers exceptional shock resistance, withstanding loads up to 600 lb in real-world testing. Despite its 7.5″ blade (approx. 191 mm) and total length of 16.75″ (approx. 425 mm), the knife remains surprisingly pocketable and accessible — a no-compromise heavy-duty tool for collectors, outdoor enthusiasts, LE operators, and bold design lovers.

Intended use: Sport / Defense / Collection
Production type: Industrial
Country of origin: Taiwan
Blade: CPM‑S35VN stainless steel
Blade finish: Polished
Handle: Black G‑10 with polished 7075 aluminum reinforcements
Blade length: 7.5″ (approx. 191 mm)
Blade thickness: 4 mm (0.157″)
Closed length: 9.25″ (approx. 235 mm)
Total length: 16.75″ (approx. 425 mm)
Closed thickness: (to be verified)
Weight: 16 oz (approx. 454 g)
Locking mechanism: Tri‑Ad Lock
Clip: Tip-up, right/left
Packaging: (to be verified)
Notes: High-strength Tri‑Ad Lock mechanism; high-performance CPM‑S35VN blade.