Sport, Military and Collectible Knives | Coltelleria Collini

Clean cuts and maximum precision. The 11OR SlipRidge Gut Hook was designed to be the first tool you reach for when processing game. Its configuration allows you to open the abdominal cavity while minimizing the risk of accidentally piercing internal organs, or to start from the inside of the legs to remove the skin without damaging the meat underneath.

Made of 440C stainless steel with a Rust Orange Cerakote finish, the Gut Hook comes with a Boltaron OD Green sheath, designed to be modular and compatible with the 15650 SlipRidge fixed blade.

Intended Use: skinning tool for hunting

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: 440C stainless steel
Blade Finish: CeraKote
Handle: 440C stainless steel
Blade Thickness: 3.18 mm
Overall Length: 122 mm
Weight: 52 g
Sheath: Boltaron, modular
Packaging: Cardboard box with Benchmade logos
Notes: Designed to pair with the 15650 and 15650-01 series SlipRidge fixed-blade knives

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

The Fox Spora mushroom picking knife was designed specifically to handle the delicate nature of mushroom stems, thereby making the harvesting process easier.

With its specially designed blade, it allows for a precise cut of the stems without damaging the mycelium—the delicate, root-like fibers from which a new mushroom can grow. Additionally, the retractable brush makes it easy to clean debris from the mushroom before storing it.

The attractive design and carrying clip make the knife practical and always ready for use during mushroom foraging trips.

Intended Use: Mushroom Knife

Country of Manufacture: Italy
Blade: Sandvik 12C27 stainless steel
Handle: deer antler
Blade Length: 65 mm.
Blade thickness: 3 mm.
Closed length: 110 mm.
Overall length: 175 mm.
Weight: 119 g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: Retractable nylon brush - Design by Riccardo Gobbato / Raven Knives Design

A sturdy pocket knife designed for the most demanding outdoor activities.

The Moutarde Black version combines a sporty yet elegant style with reliable performance in any situation. Sturdy, functional, and durable, it’s designed for outdoor enthusiasts looking for a tool that can accompany them on every adventure: from hiking to camping, mountain biking, canoeing, and other outdoor experiences.

The No. 08 Horizon Moutarde Black features an 8 cm smooth stainless steel blade—durable and versatile—and a handle made of recycled plastic designed to withstand water and extreme temperatures. Rounding out the features are a built-in 110 dB whistle and a practical lanyard loop.

The blade and ferrule are treated with a black PVD coating, which increases corrosion resistance and gives the knife a modern, distinctive look.

Choose the all-black version for an even bolder design.

Intended Use: Hiking / Sports

Manufacturing Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade Finish: Black PVD
Handle: Polyamide with non-slip treatment
Blade Length: 85 mm.
Blade thickness: 2.5 mm.
Closed length: 110 mm.
Overall length: 190 mm.
Thickness when closed: 20 mm.
Weight: 63 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: Equipped with a 110 dB emergency whistle

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

Opinel x monbento Origines Lunch Kit

The Origines lunch kit is the result of a collaboration between monbento and Opinel, designed to make eating on the go simpler, more practical, and more sustainable.

This limited edition combines the expertise of two historic French brands in an elegant and functional set, designed to accompany you every day at the office, while traveling, during a picnic, or on outdoor adventures.

Premium materials—stainless steel and beech wood—come together in a contemporary design inspired by a return to the essentials and the conviviality of the nomadic meal.

What’s included in the Origines kit
1L Sense L Lunch Box

The Sense L Lunch Box is a lightweight, sturdy, and durable metal lunch container, designed to last and simplify meals on the go.

Features:

1-liter capacity
Durable and lightweight metal construction
Oven, microwave, and stovetop safe (without lid)
Comes with a beechwood cutting board
Reusable and ideal for daily use
Elegant and practical design

Thanks to its versatile design, the Sense L becomes an indispensable accessory for those seeking a sustainable alternative to disposable containers.

Opinel néo6 Pocket Knife

The néo6 is a compact and easy-to-handle pocket knife that reinterprets the iconic Opinel style with a contemporary twist.

Features:

7 cm stainless steel blade with a rounded tip
OPIFLEX® system that keeps the blade open or closed without locking it
Varnished beechwood handle
Leather lanyard
Compact, practical, and designed for everyday use

Perfect for picnics, lunch breaks, and outdoor activities, offering both practicality and safety.

“Origines” Design

The packaging and the knife are decorated with the “Origines” motif, inspired by cave drawings and symbols of nature.

These motifs evoke a return to the essentials: eating on the go with practical, elegant items built to last.

Technical Specifications
Product Name: Opinel x monbento Origines Meal Kit
Lunch Box Capacity: 1 L
Materials: stainless steel and beech wood
Limited Edition: 3,500 pieces
Usage: office, travel, outdoor, picnic

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Designed for boating and built for performance at sea, the No. 09 Ocean is an indispensable companion; inspired by the depths of the ocean and the horizon, the No. 09 Ocean Blue is designed for quick identification on board.

Designed for boating and sailing, it combines durability, effectiveness, and safety.

It features a 9 cm semi-serrated stainless steel blade equipped with a blade extractor, and a polyamide handle resistant to water and extreme temperatures. The handle features a whistle and a hardened steel knot-cutting awl for working ropes. A lanyard loop is also available.

Its features facilitate on-board maneuvers and meet the demands of the marine environment, making it the ideal adventure companion.

Intended Use: Sports / Boating / Water Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 121mm.
Total length: 210 mm.
Thickness when closed: 20 mm.
Weight: 80 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle, stainless steel knot-cutting awl, and blade with a carabiner opener/rotator

Designed for boating and built for performance at sea, the No. 09 Ocean is an indispensable companion; inspired by the depths of the ocean and the horizon, the No. 09 Ocean Red is designed for quick identification on board.

Designed for boating and sailing, it combines durability, effectiveness, and safety.

It features a 9 cm semi-serrated stainless steel blade equipped with a blade extractor, and a polyamide handle resistant to water and extreme temperatures. The handle features a whistle and a hardened steel knot-cutting awl for working ropes. A lanyard loop is also available.

Its features facilitate on-board maneuvers and meet the demands of the marine environment, making it the ideal adventure companion.

Intended Use: Sports / Boating / Water Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 121mm.
Total length: 210 mm.
Thickness when closed: 20 mm.
Weight: 80 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle, stainless steel knot-cutting awl, and blade with a carabiner opener/rotator

The No. 08 Horizon is a durable pocket knife designed for all multisport activities. With its understated design and natural inspiration, the No. 08 Horizon Khaki is the ideal companion for all your outdoor adventures.

Sturdy and practical, it is designed for outdoor enthusiasts looking for a versatile tool suitable for all their activities: hiking, camping, mountain biking, or canoeing.

The N°08 Horizon Khaki features an 8 cm smooth stainless steel blade characterized by high corrosion resistance and excellent cutting quality. Its polyamide handle, reinforced with 30% fiberglass, is water-resistant and withstands extreme temperatures. It features a built-in 110dB emergency whistle and a lanyard hole for hanging the knife wherever you like.

Intended use: Hiking / Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 85mm.
Blade thickness: 2.5 mm.
Closed length: 110 mm.
Total length: 190 mm.
Closed thickness: 20 mm.
Weight: 63 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle

The No. 08 Champignon model is available in a black walnut version for an elegant and refined mushroom-picking experience.

This classic Opinel features a comfortable black walnut handle, accented with an orange Alcantara cord. It features an 8 cm curved stainless steel blade to facilitate harvesting, with a scraper on the back for cleaning mushrooms.

The natural bristle brush integrated at the end of the handle allows for easy dusting: the ideal tool for efficient and thorough harvesting.

This pocket knife comes in an elegant wooden case with a plexiglass window. 

Intended Use: Mushroom Picking

Production Type: Industrial
Country of Origin: France
Blade: Sandvik 12C27 Stainless Steel
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Blade Thickness: 2mm
Closed Length: 125mm
Total length: 200mm
Weight: 95g
Closure: Virobloc safety ring
Packaging: Wooden box with synthetic glass
Notes: Supplied with a high-visibility Alcantara lanyard - Fixed rear brush, made of natural bristles

Tactical, dynamic, lightning-fast! With the Böker Plus Fafo, designer Robert Kohut has created a true masterpiece. It’s no coincidence that his original design, initially shared on a knife forum, made it into mass production. The silhouette of this fixed-blade knife clearly evokes that of a throwing knife.

More than just for scoring points, this model with its tactical aesthetic, full-tang construction, and discreet black finish is designed to handle everyday cutting tasks: opening boxes, preparing packages, or cutting ropes with efficiency.

The 440C steel blade ensures excellent hardness, good edge retention, and corrosion resistance in any situation. The black titanium coating on the symmetrical single-bevel drop-point blade emphasizes its tactical character while offering protection from scratches and reducing glare.

The minimalist design continues in the slim G10 handle, which evokes the shape of a gladius, with a rounded pommel for a secure and balanced grip. The fine jimping on the spine ensures control and precision, while the weight reliefs at the base of the blade and on the pommel reduce the overall weight. The rear openings also serve as decorative hollow rivets, ideal for attaching a lanyard.

Lightweight yet sturdy, the Böker Plus Fafo is perfect as a tactical utility knife for law enforcement, special units, or anyone seeking a reliable, compact, and durable blade. The black Kydex sheath with belt adapter ensures safe and versatile carry.

The designer has also chosen to forgo his royalties, donating them to cancer research: a meaningful gesture that underscores his commitment to an important cause.

Intended Use: Light Utility

Production Type: Industrial
Country of Manufacture: China
Blade: Full tang in 440C stainless steel
Blade Finish: Black Coating
Handle: G10
Blade length: 97mm.
Blade thickness: 5.3mm.
Overall length: 177mm.
Weight: 105g.
Sheath: Kydex, with multi-position belt clip, stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Robert Kohut

The internationally acclaimed Laguiole en Aubrac forge is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this world-famous cheese.

Intended use: Regional/Collectible

Production type: Handcrafted
Blade: 12C27 stainless steel
Country of origin: France
Handle: Ebony wood
Blade length: 80mm.
Blade thickness: 2.6 mm.
Closed length: 110 mm.
Total length: 193 mm.
Weight: 88 g.
Closure: rear spring lock
Notes: sold in a round wooden box, modeled after the box of the famous French Camembert cheese

Atlas goes “Army”! Once again, the proven Boker Plus Atlas revitalizes the EDC world with a fresh take: a two-handed knife with a minimalist design that retains the same expressive power and timeless appeal as other models in the same family.

Available in a limited edition, exclusively at select retailers, this Boker Plus Atlas OD Green version combines rugged reliability, understated elegance, and surprising lightness. As an EDC folding knife, it features a full stainless steel handle with a military green Cerakote coating, ideal for everyday use. The minimalist construction ensures high durability without adding unnecessary bulk.

The Drop Point blade, made from Swedish 12C27 steel, offers excellent corrosion resistance, low wear, and ease of sharpening. To accentuate its tactical and discreet look, the blade is finished with a scratch-resistant PVD coating that also reduces light reflections.

The Atlas OD Green retains the proven opening system of its predecessors: thanks to the nail nick and slipjoint mechanism, the blade opens smoothly and closes securely. The black details (lanyard hole, clip, screws, and rivets) complete the military-inspired aesthetic, making this knife perfect for both everyday use and a bold style.

Production type: Industrial
Country of manufacture: China
Blade: Sandvik 12C27 stainless steel with Black PVD coating
Handle: stainless steel with Cerakote coating
Blade length: 75mm.
Blade thickness: 2.3mm.
Overall length: 168mm.
Weight: 49g.
Clip: Black PVD-coated stainless steel, removable
Packaging: cardboard box with manufacturer’s logos
Notes: limited edition available exclusively at select retailers

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Amberg is a collection of outdoor knives designed with a specific purpose in mind: to offer reliability, balance, and durability. Every detail has been carefully considered, from the handle geometry to the choice of materials, right down to the harmonious, nature-inspired color schemes.

Designed to accompany you on every outdoor adventure—from bushcraft to hiking, camping to fishing, hunting to cooking over a fire—the Amberg series offers the right knife for every need. A refined design combines with reliable performance, creating a tool that is intuitive to use and can be counted on, whether for everyday adventures or longer journeys through forests and mountains.

The Amberg knife is synonymous with strength, precision, and versatility: sturdy enough for the toughest tasks, yet agile enough for delicate activities and food preparation. The Scandi grind ensures a durable, long-lasting edge that’s easy to maintain even in the field, while the fire-starter-compatible spine makes lighting a fire practical and efficient.

The ergonomic handle, with an optimized profile and lab-tested non-slip texture, ensures a firm grip in all conditions, even with wet, cold, or greasy hands. The three-component construction combines a sturdy PP core with an outer TPE coating, offering the perfect balance of durability, comfort, and control.

Rounding it all out is the new Click-On sheath: durable, ambidextrous, and modular, designed for safe and flexible carry. Compatible with TEK-LOK accessories and MOLLE systems, it allows for various configurations, adapting to your needs in any situation.

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 109 mm.
Blade thickness: 3.2 mm.
Overall length: 231 mm.
Weight: 168 g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire starter

In the forests of Orsa, pink sandstone has been quarried for over a thousand years, refining tools and shaping craftsmanship through the generations. Here, a tradition of skill and perseverance was born, where stone met steel and forged knowledge that lasts a lifetime.

The Color of the Year 2026, Orsa Sandstone and Dala Red, adorns the compact Eldris outdoor knife. The colors are inspired by the light, natural shade of sandstone meeting classic Dala red, a tribute to Morakniv's heritage and origins.

Intended use: Neck Knife / Backup

Production type: industrial
Country of production: Sweden
Blade: Sandvik 12C27 stainless steel 57/58HRC
Handle: ABS and non-slip rubber
Blade length: 53mm.
Blade thickness: 2mm.
Total length: 143mm.
Balance: rearward
Weight: 80g.
Sheath: ABS
Notes: Limited edition for 2026 in Dala Red and Orsa Sandstone colors

KNIFE TAKEN FROM A PRIVATE COLLECTION
* Origin: Taken back from a private owner, previously purchased
* Condition: Like new, never used, without box
* Availability on the market: Discontinued
* Edge: Factory edge
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Cordura sheath with insert for the two included blades
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house workshop

Intended use: Collection, light outdoor
Production type: Industrial
Country of origin: United States of America
Blade: Stainless steel, plain edge
Blade finish: Bead blasted
Handle: GRN (Glass Reinforced Nylon) with textured surface
Blade length: 83mm
Blade thickness: -
Closed length: 107mm
Overall length: 187mm
Closed thickness: -
Weight: 74g
Locking mechanism: Gerber patented Bolt Action
Clip: None
Packaging: Original Gerber sheath complete with two interchangeable blades (saw blade and skinning blade)
Notes: Late 1980s vintage knife, Made in USA, 1st Production Run, never used, never sharpened, mint condition

Asile is a French artist and illustrator. Her work is a celebration of kindness, with a universe populated by colorful fauna and flora, and happy individuals. 

The N°08 Cosmos Asile features two different but equal characters. Here there is no duality, but a pairing, a balance. The moon on which they sit becomes a space for encounter and delicacy, between dream and reality. Three birds carry stars around them, as if they were redrawing a constellation. 

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8200 pieces, numbered blades.

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Dalkhafine is a multifaceted French artist who works in various disciplines: illustration, motion design, screen printing, painting, clothing, and much more. His world is colorful and largely inspired by nature.

The N°08 Cosmos Dalkhafine depicts the encounter between earthly power and cosmic energy: the strong and majestic tiger bows before the mermaid, whose head shines like the sun. The sun represents the sovereign star that watches over the universe, just as the mermaid watches over the moon.

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8,200 pieces, numbered blades.

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85 mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

The sturdy full tang construction and proven features, consisting of a stonewashed 440C drop-point blade and light brown micarta scales, prove that this little powerhouse is every bit as good as its larger counterparts. 

Professional tattoo artist Thomas Krug from M.B.F. Messer (Mein Bester Freund) not only demonstrates an expert hand with the needle, but also incorporates his aesthetic sense into the design of the fixed blade knife. Featuring knurling on the spine of the blade and the back of the handle for exceptional feel and control, the bolted handle scales feature gill-like indentations.

The shape and characteristics of the blade make the Five Point Nine the ideal backup or pocket knife for everyday use. Supplied with a lanyard hole and a perfectly fitting Kydex sheath.

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: China
Blade: 440C stainless steel ful tang
Blade finish: Stonewashed
Handle: Micarta
Blade length: 59mm.
Blade thickness: 3.2 mm.
Total length: 157 mm.
Weight: 80 g.
Sheath: Kydex, with removable stainless steel attachment system
Packaging: cardboard box with Boker Plus logos
Notes: Design by Thomas Krug

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: Present
* Manuals, Certificates, and Warranties: /
* Checked and certified by our in-house laboratory

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Finland
Blade: Sandvik 12C27 stainless steel
Blade finish: Mirror polished
Handle: Non-slip rubber
Blade length: 110mm.
Blade thickness: 2.5mm.
Total length: 230mm.
Weight: 160g.
Sheath: leather, belt-mounted
Packaging: -
Notes: previously purchased knife from a private collection

The Laguiole Old Time / Autrefois in buffalo horn is a handcrafted folding knife that celebrates French tradition with elegance and authenticity. Handmade in France, it represents a perfect balance between classic aesthetics and contemporary functionality, designed for enthusiasts, collectors, and lovers of authentic objects.

The 120 mm long, 3 mm thick Sandvik 12C27 stainless steel blade offers good cutting performance and corrosion resistance. The Slip Joint closure is accompanied by a hand-finished rear spring, a guarantee of craftsmanship and durability.

The buffalo horn handle, a natural and fascinating material, gives each piece a unique look and a warm feel to the touch. Lightweight and balanced, weighing 80 grams and with a total length of 257 mm, this knife combines practicality, style, and tradition, ideal for both sporting use and as a collector's item.

Intended use: Collection/Sporting

Type of production: Handcrafted
Blade: 12C27 stainless steel
Country of production: France
Handle: Buffalo horn
Blade length: 120 mm.
Blade thickness: 3 mm.
Closed length: 137 mm.
Total length: 257 mm.
Weight: 80 g.
Closure: Slip Joint
Notes: Handcrafted rear retention spring

WithArmour Mercenary-TN - Fixed Tactical Heavy Duty Knife

The Mercenary-TN is a full tang fixed blade knife designed for heavy duty outdoor use. Featuring a sturdy 12C27 steel blade with Soldier Grine (Saber + Scandi) sharpening, ergonomic Micarta and G10 handle, and complete equipment with Kydex sheath and fire starter, this model combines extreme functionality with craftsmanship in detail. Ideal for those seeking reliability, solidity and professional performance in the field.

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: China
Blade: 12C27 stainless steel with Soldier Grine sharpening (Saber + Scandi)
Blade Finish: Dual Tone - Stonewashed and Satin-finished
Handle: Micarta with G10 spacers
Blade Length: 137mm.
Blade thickness: 5.5mm.
Total length: 278mm.
Weight: 390g.
Sheath: thermoformed kydex with belt loop for vertical carry. With dedicated compartment for tinder (included)
Packaging: cardboard box with manufacturer's logos, certificates and warranty
Notes: -

WithArmour Mercenary-BK - Tactical Fixed Heavy Duty Knife

WithArmour's Mercenary-BK is a fixed tactical knife designed to deliver exceptional performance in emergency, outdoor and self-defense situations. With a sturdy blade and ergonomic handle, it is ideal for those seeking reliability, power and precision

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of manufacture: China
Blade: 12C27 stainless steel with full flat asymmetrical sharpening on the left side
Blade Finish: Dual Tone - Matte Black Titanium Coating and Satin finish
Handle: Micarta with G10 spacers
Blade Length: 137mm.
Blade Thickness: 5.5mm.
Total length: 278mm.
Weight: 341g.
Sheath: thermoformed kydex with belt loop for vertical carry. With dedicated compartment for diamond sharpener (included)
Packaging: cardboard box with manufacturer's logos, certificates and warranty
Notes: -

Intended use: Collection
Production type: Handmade
Country of production: France
Blade: Sandvik stainless steel
Blade finish: Satin
Handle: Ebony and turquoise inlay with golden inserts
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 90g
Locking mechanism: Slipjoint
Clip: None
Packaging: Gift box and certificate
Notes: Hand-guilloché work, handle with stone and brass inlay, unique piece

Intended use: Collection
Production type: Handcrafted
Country of manufacture: France
Blade: Sandvik stainless steel
Blade finish: Brushed satin
Handle material: Bogwood
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 90g
Locking system: Slipjoint
Clip: None
Packaging: Gift box with certificate of authenticity
Notes: Brushed stainless steel bolster, handle made from ancient natural fossil wood, entirely handmade

After skiing, cycling and hiking...
Climbing is now engraved on the handle of the traditional N. 08 pocket knife! 

The N. 08 Climbing has an 8.5 cm stainless steel blade with an excellent cutting edge. The handle is made of PEFC-certified Beech, painted and engraved.  The Virobloc safety ring allows the blade to be locked in the open or closed position. 

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Engraved beech wood
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

The iconic knife of the Alps meets the totem animal of our mountains! 
The No. 08 Marmot pocket knife has an 8.5 cm stainless steel blade. The handle is made of varnished and engraved oak. The Virobloc double safety loop locks the blade in the open or closed position. 

A must-have for nature lovers!

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Oak wood with engraving
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Uncompromising elegance
With its ebony handle, full-bodied and velvety to the touch, néo6 stands out for its refinement and comfort. A prestigious and functional pocket knife with an essential design and attention to detail.

The 7 cm stainless steel blade, with rounded tip, offers precision and safety in daily use. The discreet and practical natural leather strap completes it with a touch of elegance.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: African Ebony Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Mediterranean style, authentic soul
The Italian olive wood handle gives néo6 a warm and sunny character. Each pocketknife is a unique piece, thanks to the natural wood grain that enhances its authenticity. The 7-cm stainless steel blade with rounded tip provides safety and versatility in daily activities.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Italian Olive Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Fine materials, essential functionality
The elegant and timeless French black walnut handle gives néo6 a pleasant and natural grip. The ergonomic shape ensures comfort and control, while the leather strap adds a refined and practical detail for easy attachment.

Intended Use: EDC / Sporty

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private individual, previously purchased.
* Condition: Like new
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Le Thiers Artisanal Bouleau knife is a perfect blend of modern technology and traditional French craftsmanship. Designed to be ultra-light, it offers easy one-handed opening and closing. Its handcrafted production in Thiers is guaranteed by the Jurande, a corporation that guarantees respect for traditions and quality in handcrafted production, ensuring authenticity and quality.

Intended Use: Collection/Sportsman

Type of production: Handcrafted
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Olive wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 175mm.
Weight: 70g.
Closure: liner lock
Sheath: leather, pocket
Notes: previously purchased knife, from private collection

Inspired by the breathtaking landscape and craft traditions of Mora, “Color of the Year” celebrates the uniqueness of Dalarna, a region in the heart of Sweden famous for its history, craftsmanship and iconic colors.

Dalarna is known for its Dala horses, traditional red houses and kurbits painting, which symbolize Swedish art, nature and cultural roots.

Each year, we select colors that capture the essence of this land, from the intense tones of the Dala horses to the delicate hues of the crafts. “Color of the Year” goes beyond aesthetics, creating a deep connection between our land and each craft knife, which becomes a symbol of tradition, culture and innovation.

Intended Use: Hiking / Hunting / Sports

Type of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 2025

“Mon Premier Opinel” children's pocket knife and related case.

The “Mon premier Opinel” knife and its case for picnics, first outdoor adventures and DIY. It is an absolutely suitable gift idea for children for experimentation, nature discovery and empowerment.

8 cm blade with rounded stainless steel tip, wooden handle from eco-friendly forests, swivel safety ring to lock blade in open and closed position.

Environmentally friendly belt pouch made from shredded plastic bottles (100% recycled PET) and reclaimed leather from offcuts of leather workshops and factories.

The Virobloc safety system, invented by Marcel Opinel in 1955, allows the blade to be locked in both the open and closed position, ensuring safe use in any situation.

This knife, made entirely in France, is the perfect choice for lovers of nature and objects of distinctive design.

Intended use: outdoor, hiking

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade finish: Satin
Handle: Beech wood
Blade length: 80 mm
Length closed: 100 mm
Total length: 180 mm
Weight: 40 g
Closure: Virobloc security system
Sheath: Belt sheath, made of recycled plastic and reclaimed leather
Packaging: Cardboard box with Opinel logos

Inlaid by cabinetmaker Bruno Chaperon transforms the classic N°08: the fusion of four different woods that play on contrasts make it a unique object.

Equipped with an 8.5-cm stainless steel blade and a very durable handle, it is practical and compact. The Virobloc system allows the user to move and work safely. The wood grain changes depending on the creativity of the craftsman who created the knife. Each handle is therefore different from the other and varies in pattern and contrast, making it a truly unique knife. 

Intended Use: Collection

Type of production: Industrial
Country of production: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Mirror polish
Handle: Inlaid wood, in four different random woods and unique designs
Blade length: 85 mm
Length closed: 107 mm
Total length: 190 mm
Weight: 45 g
Closure: Virobloc security system
Clip: Not present
Packaging: Cardboard box with Opinel logos
Notes: The handle is made in our workshops according to the inlay process developed by artist Bruno Chaperon. The assemblage of four different wood species makes each handle unique: ebony, rosewood, violet wood, bocote, cocobolo, rosewood, zebrali, boxwood, amaranth. Exceptional woods with contrasting shades for an original, out-of-the-ordinary result.

PLEASE NOTE: the specimen in the photo is for illustrative purposes, by placing your order you will randomly receive a model with different woods and different inlays that make each knife unique.

Features
* Flipper-assisted opening for quick blade deployment.
* IKBS ball bearing system ensures smooth blade opening.
* Sandvik 12C27 steel blade for excellent edge retention
* Brown Micarta handle with stainless steel reinforcements that combine strength and aesthetic appeal
* Liner lock mechanism that can be easily closed with one hand
* Low-profile pocket clip for safe carrying

Intended Use: Sporting

Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Blackwashed
Handle: Micarta and Stainless Steel
Blade Length: 84.5mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 184mm.
Weight: 108g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Folts - Assisted opening via Carson Flipper system and IKBS movement on ball bearings

The Le Capucin knife embodies the timeless elegance of traditional French craftsmanship. With roots going back to the 17th century, this iconic model takes its name from its distinctive shape, inspired by the hood of Capuchin monks.

An essential and functional design, originally conceived for the shepherds and peasants of the Aubrac, it now becomes a symbol of authenticity and style. Every detail tells a story of ancient gestures and passion for perfection, making it a faithful companion for those who appreciate the art of tradition combined with modern practicality.

Intended Use: Sporty / Collection

Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade Finish: Satin
Handle: Olive wood
Blade length: 76mm.
Blade thickness: 2mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 40g.
Closing system: slip joint
Notes: -

The Laguiole en Aubrac Le Capucin knife is a symbol of craftsmanship and tradition, made from the highest quality materials to ensure elegance, performance and durability. Its combination of carbon fiber handle and Elforyn, a material that simulates ivory, makes it a unique and refined piece. Ideal for both collectors and lovers of high-end accessories.

Intended Use: Sporting/collectible

Type of production: Industrial
Country of manufacture: France
Blade: Stainless steel 12C27
Blade treatment: satin-finished
Handle: gold-plated carbon fiber and Elforyn
Blade length: 76mm.
Blade thickness: 2mm.
Length closed: 100mm.
Total length: 180mm.
Thickness when closed: 20mm.
Weight: 40g.
Closure: single spring, slip joint

The Opinel N° 112 Paysage Colors set of 4 knives combines functionality, quality, and vibrant design for your table. Designed for every occasion, these knives blend unmistakable French craftsmanship with a modern and fresh style inspired by the colors of natural landscapes.

Thanks to the sharp Sandvik stainless steel blades and ergonomic beechwood handles in vibrant colors, the Opinel N° 112 Paysage set is not only a practical tool for cutting food but also a decorative element that adds elegance and vitality to your table.

Perfect for fruits, vegetables, and everyday foods, these knives are the ideal choice for those seeking versatility, durability, and style in one product. Let Opinel tradition, combined with contemporary design, transform your dining experience.

• Intended Use: Domestic use - Table knives
• Production Type: Industrial
• Country of Manufacture: France
• Blade: Sandvik 12C27 stainless steel, razor-sharp
• Blade Finish: Satin
• Handle: Beechwood, Paysage colors
• Blade Length: 10 cm
• Blade Thickness: 1 mm
• Total Length: 19 cm
• Weight: 27 g per knife (approx. 108 g for the entire set)
• Closure: None (fixed knives)
• Clip: None
• Packaging: Eco-friendly recycled cardboard box with Opinel logo
• Notes: Ideal for cutting fruits, vegetables, and soft foods. Handle painted with a water- and weather-resistant finish. Hand washable (not dishwasher safe).

The Opinel N°08 Animalia knife with deer engraving is an elegant cutting tool that combines tradition and craftsmanship.

The 8.5 cm blade, made from Sandvik 12C27 stainless steel, offers exceptional cutting quality and corrosion resistance. The handle, crafted from French oak wood known for its hardness and resistance to insects and fungi due to its high tannin content, features a laser engraving of a deer, symbolizing majesty and strength.

The Virobloc locking system ensures safety during use and transport, making this knife a reliable companion for daily activities and a highly appealing collector's item.

Intended use: Daily use, collection
Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Polished
Handle: Oak wood with laser engraving
Blade length: 85 mm
Blade thickness: 1.68 mm
Closed length: 107 mm
Total length: 190 mm
Closed thickness: 10.5 mm
Weight: 45 g
Locking system: Virobloc safety ring
Clip: Not included
Packaging: Cardboard box with Opinel logos
Notes: Painted handle for protection against dirt and moisture

The Opinel N°08 Animalia America with Bison engraving is a tribute to American wildlife, combining the elegance of French design with the functionality of a high-quality pocket knife.

The oak wood handle, sourced from French forests, features a refined laser engraving depicting a Bison in a natural landscape, making each piece unique and captivating.

The martensitic stainless steel blade, measuring 8.5 cm, offers excellent cutting performance and corrosion resistance, ideal for outdoor activities and everyday use.

The Virobloc safety system, invented by Marcel Opinel in 1955, allows the blade to be locked in both the open and closed positions, ensuring safe use in any situation.

This knife, entirely made in France, is the perfect choice for nature lovers and those who appreciate distinctive designs.

Intended Use: Outdoor, hiking, collection
Type of Production: Industrial
Country of Production: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Polished
Handle: Oak wood with laser engraving
Blade Length: 85 mm
Blade Thickness: Information not specified
Closed Length: 107 mm
Total Length: 190 mm
Closed Thickness: Information not specified
Weight: 45 g
Locking Mechanism: Virobloc safety system
Clip: Not included
Packaging: Cardboard box with Opinel logos
Notes: Varnished handle for protection against moisture and dirt

The Opinel N°08 Animalia America with Bear engraving is a tribute to American wildlife, combining the elegance of French design with the functionality of a high-quality pocket knife.

The oak wood handle, sourced from French forests, features a refined laser engraving depicting a bear in a natural landscape, making each piece unique and captivating.

The martensitic stainless steel blade, measuring 8.5 cm, provides excellent cutting performance and corrosion resistance, ideal for outdoor activities and daily use.

The Virobloc safety system, invented by Marcel Opinel in 1955, locks the blade in both open and closed positions, ensuring safe use in any situation.

This knife, entirely made in France, is the perfect choice for nature enthusiasts and lovers of distinctive design objects.

Intended use: Outdoor, hiking, collection

Production type: Industrial

Country of production: France

Blade: Martensitic stainless steel 55-57 HRC

Blade finish: Polished

Handle: Oak wood with laser engraving

Blade length: 85 mm

Blade thickness: Information not specified

Closed length: 107 mm

Total length: 190 mm

Closed thickness: Information not specified

Weight: 45 g

Lock: Virobloc safety system

Clip: Not included

Packaging: Cardboard box with Opinel logos

Notes: Handle painted for protection against moisture and dirt

From the famous French company Opinel, a folding knife that has become a timeless classic.

Sandvik stainless steel blade (0.4% carbon content).
Beech wood handle
Exclusive Virobloc system to lock the blade in closing and opening.

N.12
- SAWED BLADE 12cm , total length 28cm
- weight: 115 gr.

The Opinel N°09 Cime knife is a special edition embodying the elegance and savoir-faire of the renowned French brand. This model stands out for its refined design and use of premium materials, making it an ideal accessory for knife enthusiasts and collectors alike. The 9 cm stainless steel blade offers excellent cutting performance and corrosion resistance, while the handle, crafted from an assembly of three contrasting French woods—sycamore maple, thermally treated ash, and black walnut—ensures a comfortable grip and unique aesthetics.

The Virobloc safety ring allows the blade to be locked in both open and closed positions, ensuring total safety during use. Inspired by mountain peaks and wave crests, the N°09 Cime evokes a sense of adventure and sophistication. Entirely made in France, it reflects Opinel's commitment to quality and artisanal tradition.

It comes in an elegant packaging, making it an excellent choice for a prestigious gift.

• Intended Use: Collection
• Production Type: Industrial
• Country of Manufacture: France
• Blade: Sandvik 12C27M martensitic stainless steel
• Blade Finish: Polished
• Handle: Assembly of sycamore maple, thermally treated ash, and black walnut
• Blade Length: 90 mm
• Blade Thickness: 2.2 mm
• Closed Length: 107 mm
• Total Length: 198 mm
• Closed Thickness: 12 mm
• Weight: 57 g
• Locking Mechanism: Virobloc safety ring
• Clip: Not included
• Packaging: Elegant box with mountain-themed decorations
• Notes: Special edition inspired by mountain peaks and waves. Perfect as a prestigious gift or for collectors.

Limited to 1999 pieces worldwide, the forged steel collector's knife was designed as a compact outdoor knife with integral construction and was largely inspired by classic hunting knives. The Boker Magnum Collection 2024 is the perfect balance of showcase and outdoor adventure.

Intended Use: Collection/Utility

Production Type: Industrial
Country of manufacture: China
Blade: forged, 440C steel
Blade Finish: Satin finish
Handle: in Quilted Maple wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 145g.
Sheath: leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Andreas Schweikert

EDC is its home - the world is its home! Reliable, sturdy and biting, the Boker Plus Worldwide 2.0 is a two-handed opening tactical knife whose cosmopolitan features should make it legal to carry in many countries around the world. No blocking system, no quick one-handed opening, no worries: the solid 440C stainless steel drop point blade can be opened comfortably thanks to the generous claw, while the slipjoint system equipped with a powerful spring ensures total stability and safety in use.

The refined black stonewash finish of the blade perfectly matches the ergonomic olive green G10 handle grips adding a tactical touch. The folding knife is cosmopolitan thanks to the various carrying options offered by the lanyard hole and reversible clip. 

Intended Use: EDC

Production type: Industrial
Country of manufacture: China
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: made of G10, with stonewashed stainless steel inner folders
Blade length: 64mm.
Blade thickness: 2.8mm.
Total length: 155mm.
Weight: 87g.
Closure: SlipJoint
Clip: stonewashed stainless steel, removable and reversible
Sheath: - 
Packaging: cardboard box with Boker Plus logos
Notes: -

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way. 

The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden box

The Opinel N°10 with Corkscrew and Cap Lifter is a special variant of the famous Opinel N°10 knife, featuring a versatile blade and a beech wood handle. This additional version is designed to offer extra functionality.

The blade of the Opinel N°10 is made of high-quality stainless steel, which offers good durability and corrosion resistance. The clip-point shape of the blade makes it ideal for multiple uses, such as cutting, peeling or slicing.

In addition to the blade, this model has two additional tools built into the 'handle. The corkscrew is a curly metal protrusion that can be used to easily remove corks from wine bottles, making the knife also suitable for food and wine-related activities. The bottle opener, on the other hand, is a tool for opening glass bottles with crown corks, allowing drinks to be opened quickly and easily.

The handle of the Opinel No. 10 is made of wood, typically beech, which provides an excellent grip and a traditional look. It features Opinel's classic Virobloc locking system, which allows the blade to be securely locked in the open or closed position, improving safety during use and transport.

Type of production: industrial
Country of manufacture: France
Blade: stainless steel
Handle: beech wood
Blade length: 100mm.
Corkscrew length: 65mm.
Blade thickness: 2mm.
Length when closed: 130mm.
Thickness when closed: 24mm.
Total length: 230mm.
Weight: 62g.
Closure: Virobloc

The N°08 Savoyard puts the accent on the cradle of Opinel: the mountains of Savoy! 

The beechwood handle is lacquered and decorated with the Savoyard coat of arms. At the end of the handle is a red drawstring for easy carrying. The blade is made of stainless steel and the knife has a Viroblock safety ring.


Type of production: industrial
Country of manufacture: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with pad printing and red strap
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special edition 2023

The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.

This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.

* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket



Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings

The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.

This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.


* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket




Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings

A reliable, full tang bushcraft knife that can be used in a wide variety of situations during your next long-duration adventure. The ergonomic polished ash wood handle allows for a variety of grips that can be useful. The black recycled Swedish stainless steel blade, with its full curvature and drop point, allows you to get the most out of your experience. The back of the blade is also compatible with a fire starter.

The unique, carefully selected ash wood handle features a functional grip bead and a 2.5 mm thick black blade made of recycled Swedish stainless steel, providing strength and stability with every cut. Thanks to the design of the blade and handle, the knife is well balanced and specially developed for precision work. The black PC coating creates a balanced contrast between the bright ash wood and the polished edge of the blade. The vegetable-tanned leather sheath has a belt loop and protects the cutting edge from surfaces that can dull the knife.


Intended use: hiking / bushcraft / light utility

Type of manufacture: semi-crafted
Blade: full tang, recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: ash wood
Blade length: 103mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Balance: advanced
Weight: 128g.
Sheath: vegetable-tanned leather
Notes: scandi-type sharpening