Sport, Military and Collectible Knives | Coltelleria Collini

Clean cuts and maximum precision. The 11OR SlipRidge Gut Hook was designed to be the first tool you reach for when processing game. Its configuration allows you to open the abdominal cavity while minimizing the risk of accidentally piercing internal organs, or to start from the inside of the legs to remove the skin without damaging the meat underneath.

Made of 440C stainless steel with a Rust Orange Cerakote finish, the Gut Hook comes with a Boltaron OD Green sheath, designed to be modular and compatible with the 15650 SlipRidge fixed blade.

Intended Use: skinning tool for hunting

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: 440C stainless steel
Blade Finish: CeraKote
Handle: 440C stainless steel
Blade Thickness: 3.18 mm
Overall Length: 122 mm
Weight: 52 g
Sheath: Boltaron, modular
Packaging: Cardboard box with Benchmade logos
Notes: Designed to pair with the 15650 and 15650-01 series SlipRidge fixed-blade knives

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

Tactical, dynamic, lightning-fast! With the Böker Plus Fafo, designer Robert Kohut has created a true masterpiece. It’s no coincidence that his original design, initially shared on a knife forum, made it into mass production. The silhouette of this fixed-blade knife clearly evokes that of a throwing knife.

More than just for scoring points, this model with its tactical aesthetic, full-tang construction, and discreet black finish is designed to handle everyday cutting tasks: opening boxes, preparing packages, or cutting ropes with efficiency.

The 440C steel blade ensures excellent hardness, good edge retention, and corrosion resistance in any situation. The black titanium coating on the symmetrical single-bevel drop-point blade emphasizes its tactical character while offering protection from scratches and reducing glare.

The minimalist design continues in the slim G10 handle, which evokes the shape of a gladius, with a rounded pommel for a secure and balanced grip. The fine jimping on the spine ensures control and precision, while the weight reliefs at the base of the blade and on the pommel reduce the overall weight. The rear openings also serve as decorative hollow rivets, ideal for attaching a lanyard.

Lightweight yet sturdy, the Böker Plus Fafo is perfect as a tactical utility knife for law enforcement, special units, or anyone seeking a reliable, compact, and durable blade. The black Kydex sheath with belt adapter ensures safe and versatile carry.

The designer has also chosen to forgo his royalties, donating them to cancer research: a meaningful gesture that underscores his commitment to an important cause.

Intended Use: Light Utility

Production Type: Industrial
Country of Manufacture: China
Blade: Full tang in 440C stainless steel
Blade Finish: Black Coating
Handle: G10
Blade length: 97mm.
Blade thickness: 5.3mm.
Overall length: 177mm.
Weight: 105g.
Sheath: Kydex, with multi-position belt clip, stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Robert Kohut

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

KNIFE TAKEN FROM A PRIVATE COLLECTION
* Origin: Taken back from a private owner, previously purchased
* Condition: Like new, never used, without box
* Availability on the market: Discontinued
* Edge: Factory edge
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Cordura sheath with insert for the two included blades
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house workshop

Intended use: Collection, light outdoor
Production type: Industrial
Country of origin: United States of America
Blade: Stainless steel, plain edge
Blade finish: Bead blasted
Handle: GRN (Glass Reinforced Nylon) with textured surface
Blade length: 83mm
Blade thickness: -
Closed length: 107mm
Overall length: 187mm
Closed thickness: -
Weight: 74g
Locking mechanism: Gerber patented Bolt Action
Clip: None
Packaging: Original Gerber sheath complete with two interchangeable blades (saw blade and skinning blade)
Notes: Late 1980s vintage knife, Made in USA, 1st Production Run, never used, never sharpened, mint condition

The sturdy full tang construction and proven features, consisting of a stonewashed 440C drop-point blade and light brown micarta scales, prove that this little powerhouse is every bit as good as its larger counterparts. 

Professional tattoo artist Thomas Krug from M.B.F. Messer (Mein Bester Freund) not only demonstrates an expert hand with the needle, but also incorporates his aesthetic sense into the design of the fixed blade knife. Featuring knurling on the spine of the blade and the back of the handle for exceptional feel and control, the bolted handle scales feature gill-like indentations.

The shape and characteristics of the blade make the Five Point Nine the ideal backup or pocket knife for everyday use. Supplied with a lanyard hole and a perfectly fitting Kydex sheath.

Intended use: EDC / Light Utility

Type of production: Industrial
Country of production: China
Blade: 440C stainless steel ful tang
Blade finish: Stonewashed
Handle: Micarta
Blade length: 59mm.
Blade thickness: 3.2 mm.
Total length: 157 mm.
Weight: 80 g.
Sheath: Kydex, with removable stainless steel attachment system
Packaging: cardboard box with Boker Plus logos
Notes: Design by Thomas Krug

Limited to 1999 pieces worldwide, the forged steel collector's knife was designed as a compact outdoor knife with integral construction and was largely inspired by classic hunting knives. The Boker Magnum Collection 2024 is the perfect balance of showcase and outdoor adventure.

Intended Use: Collection/Utility

Production Type: Industrial
Country of manufacture: China
Blade: forged, 440C steel
Blade Finish: Satin finish
Handle: in Quilted Maple wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 145g.
Sheath: leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Andreas Schweikert

Intended use: Sports/Hunting

Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.

Intended Use: Rescue Tool / Utility

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso Rumici

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearings

Intended use: EDC / Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 56g.
Clip: removable, in titanium
Closure: -
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: Tactical / emergency belt cutter

Production type: Industrial
Country of production: USA
Blade: Stainless steel 440C
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Length closed: -
Total length: 166mm.
Weight: 51g. (77g. including scabbard)
Closure: -
Scabbard: Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: satin finish
Handle: G10
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 51g.
Clip: removable, steel
Locking mechanism: -
Package: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: tactical / emergency belt cutter

Type of production: Industrial
Country of production: USA
Blade: 440C stainless steel
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Closed Length: -
Total length: 110mm.
Weight: 43g.
Closing: -
Sheath: in Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Note: -

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended Use: Bushcraft / Outdoor

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C HRC 57-59
Blade Treatment: Stonewashed
Handle: Micarta
Blade Length: 100mm.
Blade thickness: 4mm.
Total lenght: 220mm.
Weight: 180g.
Sheath: Kydex, with Tek-Lok type fitting
Package: Cardboard box with BlackFox logos.
Notes: Tinderbox to light the fire to be inserted in the sheath - Design by Alfredo Doricchi

tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath

Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: micarta green
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Intended Use: Hiking / Heavy Duty

Type of Production: Industrial
Blade: Stainless steel 440 58/59HRC treatment with Black Powder
Production Lama Italy
Handle: forprene
Blade length: 221mm.
Blade Thickness: 5mm.
Overall length: 368mm.
Balancing: advanced to 2cm. the branch of guard
Weight: 575g.
Closure: -
Clip: -
Sheath: Cordura MOLLE compatible
Packaging: cardboard box
Notes: -

Maserin Saw Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.

functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers

Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain

size:
8 cm (Length)
42 g (weight)

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

Intended Use: Knife Mushrooms

Blade: Stainless steel 440
Handle material: Olive
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 138mm.
Total length: 208mm.
Balance: -
Weight: 95g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: brush hair Exchange - inch and tweezers

The collaboration between the writer Nicolai Lilin and Knives Maserin was born on 987 Siberian Knife. Knife shapes typically Siberian, has blade and scabbard with designs that reflect themes and symbols tradition of this land, cold and still largely mysterious; elements also present in figurative works and tattoos created by the author of the best selling book Siberian Education, then became blockbuster thanks to the wise directed by Gabriele Salvatores.

Intended use: Hunting / Sports / Collection

Type of production: Industrial production

blade: Italian blade: 440A stainless steel blade

Treatment: -

Handle: Wood Pau Santo

Blade length: 170mm.

Blade thickness: 4.5mm.

Closed Length: -

Overall length: 293mm.

Thick when closed: -

Balance: -

Weight: 288g.

Lock: -

Clip: -

Sheath: Leather

Package: Cardboard Box

Notes: Kolima Design by Nicolai Lilin

Intended Use: Knife Mushrooms

Blade: Stainless steel 440
Handle material: Rosewood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 138mm.
Total length: 208mm.
Balance: -
Weight: 95g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: brush hair Exchange - inch and tweezers

Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.

Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cm

Accetta prodotto dalla Maserin

– Lama in acciaio 440 satinata
– Manicatura in gomma antiscivolo
– Lunghezza totale 38 cm
– Peso 700 grammi
– Fodero in cuoio nero

Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

The shape reached today derives from ancient styles used in past times.

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

For the fiftieth anniversary of the birth of Diabolik , one of the most loved by fans of comics noir , the cutlery Maserin , in collaboration with the publishing house Astorina , have created a version of " replica " of the famous knife throwing of the King of Terror . Weapon of choice by the character created in 1962 by the imagination of the Giussani sisters , the dagger "Diabolik Special Edition" Maserin replica of the features and style of the original knife , inseparable companion of many adventures Man of a Thousand Faces .

Type of production : Industrial
Production Blade: Italy
Blade: Stainless Steel 440 blunt
Treatment Lama : -
Handle material: TPE
Blade length : 160mm .
Blade thickness : 3.5mm .
Length closed: - mm .
Total length : 275mm .
Thick when closed: - mm .
Balance: -
Weight: 210g .
Closing: -
Clip: -
Sheath: nylon , Made in Italy , by Radar
Packaging : cardboard box with logos and Maserin Diabolik
Note : Product Exhibition / collectible officially licensed

Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. E 'characterized by a blade with typical shape of a scimitar, or "French".

Intended use: gentleman / collection

Type of production: Industrial
Production Blade: Italy
Blade: 440A stainless steel 55/57HRC
Treatment Lama: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balance: -
Weight: 104g.
Clasp: double-retention spring on the inner liners
Clip: -
Sheath: leather suede bag with logos Viper
Packaging: box of black cardboard with silver logos, warranty certificates
Notes: numbered copies with a limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

Destinazione d'uso: Tattico / Militare

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A 55/57HRC
Trattamento Lama: Black Idroglider in PTFE Nero
Manicatura: ABS
Lunghezza lama: 180mm.
Spessore lama: 5mm.
Lunghezza totale: 325mm.
Peso: 300g.
Fodero: in gomma nera, con pietra per affilatura nella tasca superiore
Confezione: -
Note: Impugnatura cava con bussola ed accessori survival inseriti nel manico

Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. It is characterized by a blade with a typical scimitar or "French" shape.

Intended use: gentleman / collection

Type of production: Industrial
Lama production: Italy
Blade: 440A stainless steel 55 / 57HRC
Blade treatment: -
Handle: bovine horn horn tip (ATTENTION: since it is a natural material, the color may change with respect to the knife photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

Knife from a private collection, overall in excellent condition, with scratches on the blade due to insertion and removal from the sheath. Unpackaged - Checked, certified by our in-house laboratory.

Designed for NATO military aircraft crews, the ASEK-Bowie is a rescue and emergency knife

Intended use: Fighter / Tactical

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade treatment: Teflon coated
Production Lama: Germany
Handle: Polyamide reinforced with fiberglass
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -1cm back from the guard branch
Weight: 235g.
Sheath: cordura and polyamide with sharpener and small backup knife

Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.

Intended use: Collection / Sports

Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing thread

Intended use: Kukri/Heavy Utility

Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-like

Packaging: Cardboard box with Down Under logos and warranty certificates

Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: Collection

Type of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)

The colors of the materials with which our handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Fiorentino Buffalo Silver Engraved R-FIB20A - knife

Craft knife regional product in Scarborough in use up to 800 in Tuscany.
The handle, in a single piece of horn, door foot in the characteristic ring round silver engraved.

Blade of carbon steel
Blade length: 8.5 cm
Blade thickness: 2.5 mm
Length open: 20 cm
Weight: 78 gr

Destination of use: hunting

Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Lama production: Italy
Handle: Deer
Blade length: 190mm.
Blade thickness: 4mm.
Length closed: 220mm.
Total length: 310mm.
Balancing: backward - 1cm. from the guard branch
Weight: 270g.
Closure: Side button lock
Clip: -
Sheath: Leather
Note: -