Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Aitor - Jungle King I knife Black - green sheath - 16016V - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos16016V -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Aitor - Jungle King II Black knife Camo - 16071 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16071 -
Medford Knife and Tools - NAV-H Fixed - Bead Blasted D2 & Green G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in good condition
* Commercially available: discontinued
* Sharpening: professionally re-sharpened.
* Marks on blade: small abrasions given by insertion in Kydex sheath.
* Marks on handle: small abrasions in a couple of places.
* Box: Nylon pouch.
* Scabbard: made of Kydex
* Manuals, Certificates and Warranties: missing.
* Checked and Certified by our in-house laboratoryIntended Use: Tactical/Collection
Production type: MidTech
Country of manufacture: USA
Blade: full tang, D2 steel
Blade finish: microbead blasting
Handle: G10 green
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 230mm.
Weight: 368g.
Sheath: kydex, thermoformed, with Tek Lok type attachment
Packaging: nylon pouch, with zipper closure and Medford logos
Notes: designed and built by Greg MedfordAP10517 -
Aitor - Commando Black knife - 16021 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16021 -
Aitor - Commando Satin knife - 16020 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16020 -
Aitor - Jungle King I knife Black - 16016N - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16016N -
Aitor - Jungle King II Black knife - 16013N - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013 -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5 -
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia
Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -F-NL5CX -
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numberedF-PHK -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - SK1 Jarl Betulla - fodero in cuoio - coltello
Destinazione d'uso: Caccia
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Legno di Betulla
Lunghezza lama: 100mm.
Spessore della lama: 4,5mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrato di 1 cm dal ramo di guardia
Peso: 134g.
Fodero: Cuoio
Note: -F-SK1 -
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -F-SK3 -
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Aitor - Ferfal Outdoor knife - N680 steel - 16099 - knife
Intended use: Collection / Outdoor
Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers
Packaging: cardboard with Aitor logosAI-16099 -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Medford Knife and Tools - USMC Fighter tactical knife MK103 - knife
modern version of the classic USMC produced by Medford
Intended use: Tactical / Collection
Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg MedfordMK103 -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Kiku Matsuda Knives - Kawa Kaze KK01 en acero SanMai Cuchillo fijo - cuchillo artesanal
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Uso previsto: Colección / Deportes
Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.KK01 -
Kiku Matsuda Knives - Southern Cross KM-760 Fixed Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: -
Handle: Black Canvas Micarta
Blade length: 80mm.
Blade thickness: 5.3mm.
Length closed: -
Total length: 195mm.
Thickness when closed: -
Balancing: -
Weight: 186g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attack
Package: -
Notes: Kiku Matsuda won in 2007 the prestigious "Knife Of The Year Awards" Blade Show with a project realized in collaboration with SOGKM-760 -
Kiku Matsuda Knives - Back Up Neo 300 Fixed Blade Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOGKM-300 -
Kiku Matsuda Knives - Back Up Zero 490 Fixed Blade Knife - artisan knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-490 -
Kiku Matsuda Knives - J Defender Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-730 -
Kiku Matsuda Knives - Karambit Desperade - handmade knife
Kiku Matsuda is one of the most famous artists and scholars sharpening throughout Japan; probably in your collection is already a fruit knife of his passion: collaborates for several years with SOG, William Henry, Pro-Tech and Randall Kings developing to their bevels, and politure sharpening the blades.
Intended Use: Collection / TacticalType of production: Handmade
Production Country: Japan
Blade: D2 hardened carbon steel to 61 HRC
Handle: Green Canvas Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 232mm.
Balancing: Set back
Weight: 210g.
Sheath: Kydex with Tek-Lok attack
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project carried out in collaboration with SOG Knives12508 -
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.
Intended use: Sport / Fishing
Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-390 -
Kiku Matsuda Knives - Knife KM-340 - craft knife
Kiku Matsuda Knives - Knife KM-340 - craft knife
Intended Use: Collection / Sports / Tactical
Unique and no longer produced by Kiku
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel 61HRC D2
Treatment Lama: acid
Handle: Black G10
Blade length: 195mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: -
Weight: 440g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesHK-340 -
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Intended Use: Collection / Sports / Tactical
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-460 -
Kiku Matsuda Knives - Hasinau Kamui Master Hunters - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Caccia
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: G10 Black
Lunghezza lama: 130mm.
Spessore lama: 5,0mm.
Lunghezza chiuso: -
Lunghezza totale: 260mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 360g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Questo coltello è stato disegnato dal giapponese Mr. Chujyo di Hokkaido - Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsKM-500A -
Kiku Matsuda Knives - Blast Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.8mm.
Total Length: 275mm.
Weight: 390g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-215 -
Kiku Matsuda Knives - Aoba Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsAB31 -
Kiku Matsuda Knives - Back Up Small Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsBUP-MN -
Medford Knife and Tools - NAV-T Tactical Coyote - knife
Medford Knife and Tools - NAV-T Tactical Coyote - knife
Intended use: Tactical / Collection
Type of production: Custom
Production Lama: Use
Blade: Stainless D2
Treatment Lama: -
Handle material: paracord woodland
Blade length: 95mm.
Blade thickness: 6.5mm.
Overall length: 230mm.
Balancing: on the branch of guard
Weight: 330g.
Sheath: kydex coyote
Packing: Nylon pouch with zipper and logos Medford
Notes: Designed and built by Greg Medford10516D -
Medford Knife and Tools - FM-1 Field Master Black knife - knife
Intended use: Tactical / Collection
Type of production: Custom
Lama production: Use
Blade: D2 steel
Blade treatment: -
Handle: paracord desert
Blade length: 105mm.
Blade thickness: 5.5mm.
Total length: 225mm.
Balancing: on the guard branch
Weight: 262g.
Sheath: kydex
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg Medford10514 -
Medford Knife and Tools - TS-2 Tactical Service Sniper Field Craft Blade - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: black
Manicatura: paracord desert
Lunghezza lama: 150mm.
Spessore lama: 7mm.
Lunghezza totale: 280mm.
Bilanciatura: sul ramo di guardia
Peso: 438g.
Chiusura: -
Clip: -
Fodero: in kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: disegnato e costruito da Greg Medford10513 -
Medford Knife and Tools - NAV-T Tactical Black - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: paracord green
Lunghezza lama: 95mm.
Spessore lama: 6.5mm.
Lunghezza totale: 230mm.
Bilanciatura: sul ramo di guardia
Peso: 330g.
Fodero: kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: Disegnato e costruito da Greg Medford10516 -
Medford Knife and Tools - TSP Tactical Spear Tip Black - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: paracord
Lunghezza lama: 105mm.
Spessore lama: 6.5mm.
Lunghezza totale: 240mm.
Bilanciatura: sul ramo di guardia
Peso: 378g.
Fodero: kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: Disegnato e costruito da Greg Medford10512 -
Medford Knife and Tools - TSP Tactical Spear Tip - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: paracord
Lunghezza lama: 105mm.
Spessore lama: 6.5mm.
Lunghezza totale: 240mm.
Bilanciatura: sul ramo di guardia
Peso: 378g.
Fodero: kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: Disegnato e costruito da Greg Medford10511 -
Medford Knife and Tools - TS-1 Tactical Service Sniper Field Craft Blade - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: paracord
Lunghezza lama: 130mm.
Spessore lama: 6mm.
Lunghezza totale: 245mm.
Bilanciatura: sul ramo di guardia
Peso: 338g.
Chiusura: -
Clip: -
Fodero: in kydex
Confezione: astuccio in nylon, con chiusura a zip e loghi Medford
Note: disegnato e costruito da Greg Medford10515 -
Aitor - Crow Black Tactical Knife - 16129 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051B -
Aitor - Crow Tactical Knife - 16128 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051 -
Aitor - Jungle King II knife satin - 16012 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16012 -
Aitor - One Black Tactical Knife - 16131 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252B -
Aitor - One Tactical Knife - 16130 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252S -
Aitor - Zero Black Tactical Knife - 16127 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: black
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450B -
Aitor - Zero Tactical Knife - 16126 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450