Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Knife from a private collection

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Survival

Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in Italy

Knife withdrawn from private collection - Overall in good condition, has some minor wear marks on the aluminum handle. On the other hand, the blade is in excellent condition and still has the factory sharpening - The knife is without packaging and certificates, but comes with the original Nylon sheath - Checked and certified by our in-house laboratory.




Innovative tactical/military knife, designed by Duane Dieter, produced in the late 1990s and immediately became an icon in the cutlery scene.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.




Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft grade aluminum with non-slip and skull-crasher inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, stainless steel
Sheath: made of Nylon with MOLLE attachments

Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

THE CAC® GIGN - Limited Edition 250 ex.

The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® scelto ufficialmente dell'Esercito Francese

Questo coltello è un vero concentrato di tutte le tecnologie avanzate che ci si aspetterebbe da un coltello operativo. La lama è in Nitrox®,  con manicatura in PA6

La versione del C.A.C attualmente in dotazione all'esercito, con logo ufficiale sulla lama e impugnatura in coyote non è disponibile per la vendita al civile.

Il CAC ® è il terzo coltello prdotto dalla Tarrerias - Bonjean progettato per l'esercito francese. Il suo design senza compromessi, leggerezza e robustezza fanno del CAC® un coltello eccezionale. Molto più tecnico e ambizioso dei suoi predecessori, il CAC® è la risposta di TB alla richiesta espressa dall'esercito francese, ovvero quella di progettare un coltello robusto e ambidestro con apertura e chiusura con una sola mano. Per creare questo eccezionale coltello, Tarrerias - Bonjean ha collaborato con Philippe Perotti, ex appartenente alle forze speciali francesi e autore di decine di libri sul tiro. La sua comprovata esperienza nel combattimento corpo a corpo ha massimizzato l'efficienza dell'uso del coltello per rendere il CAC® il compagno ideale per le truppe francesi in tutti i teatri operativi. Il meccanismo di bloccaggio del CAC® è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

TB ha anche integrato il meccanismo di bloccaggio sicuro della lama spostando l'asse sul CAC®. Questo meccanismo è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

Il CAC® è stato ufficialmente selezionato nel 2017 dall'esercito francese, rispetto all'offerta dei competitor, per le sue prestazioni, e rapporto qualità prezzo. La sua distribuzione nei vari corpi d'armata è iniziata all'inizio del 2018 e equipaggerà in gran parte i nostri francesi almeno fino al 2022.

Perfettamente resistente alla corrosione, la lama è realizzata in Nitrox®. Il CAC® ha anche un rompivetro, un taglia cinture e una clip da cintura reversibile.

Il manico è composto da due piastre in polimero caricato con fibre di vetro. Queste piastre sono avvitate al meccanismo tramite viti in acciaio inossidabile, una delle quali ospita abilmente una lama taglia reggetta. Questa lama curva e intercambiabile è progettata per tagliare cinghie, corde e cinture di sicurezza per facilitare l'estrazione in caso di incidente.

Destinazione d'uso: collezione

Lama: in acciaio inox Nitrox® 58/59 hrc
Manicatura: in G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 238mm.
Peso: 161g.
Fodero: -
Note: design Philippe Perotti 

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

Intended use: sports

Type of production: industrial
Blade: full tang in 440B stainless steel
Blade treatment: -
Lama production: China
Handle: kryton
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Weight: 102g.
Closing: -
Clip: in steel
Sheath: -
Note: -

Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.

Features:

coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel

History of the coin:

The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: Sports / Collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -

Master of Defense - CQD Mark II by Duane Dieter - knife

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 154CM stainless steel with titanium nitride
Handle: aeronautical aluminum with non-slip inserts and skull-crasher
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 200mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with secure additional system
Clip: removable and reversible, stainless steel
Packaging: cardboard box with logos M.O.D. Master of Defense and warranty certificates - Nylon sheath with MOLLE attacks

Mcusta - Series Katana - MC-0041C - knife

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Mcusta - Basic Series Rosewood - MC-0014R - knife

Intended use: Sport

Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -

Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle material: steel and ebony
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Susu-Take Money Clip MC-0152 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle: Steel and Red pakkawood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Tsuchi Green - MC-163D - knife

Type of production: industrial cutting - assembly and handcrafted finishes 

Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Mcusta - Ao-Take Money Clip MC-0154 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: steel AUS-8
Blade Production: Japan
Handle material: stainless steel and green micarta
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip this
Sheath: -
Notes: -

Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -

Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -

Mcusta - Riple knife - MC-0142 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -

Mcusta - Mari Damascus Japan - MC-0036D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Innovative tactical / military knife, designed by Duane Dieter, produced at the end of the 90s and immediately became an icon in the field of cutlery.

Master of Defense, an eclectic American brand no longer in business and subsequently acquired by Blackhawk! Blades produced various tactical and military types of folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Single copy 867/2000 at our disposal, new and with original boxes, nowhere to be found and discontinued for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Lama production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: Aeronautical aluminum with non-slip inserts - belt-cutting and skull-crasher
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 247mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with M.O.D. Master of Defense and warranty certificates

Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: hammered steel
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 74g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 167mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection / gentlemen

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: clip ferma soldi

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Produzione Lama: Giappone
Lama: in acciaio inox AUS-8
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 50mm.
Spessore della lama: 2mm.
Lunghezza chiuso: -
Lunghezza totale: 120mm.
Bilanciatura: sul ramo di guardia
Peso: 56g.
Chiusura: Frame Lock
Clip: clip fermasoldi
Fodero: -
Note: -

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: sporivo/collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: VG-10 59/60HRC e guance esterne in acciaio inox
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco e cocobolo
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 96mm.
Lunghezza totale: 166mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Liner Lock
Clip: -
Fodero: cordura
Note: -