Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Ka-Bar - Dozier Folding Hunter knife 4062D2 - Coyote Blue Zytel Handle - knife
Intended use: tactical
Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4062D2 -
Ka-Bar - Becker Folder - BK40 - knife
Intended Use: Sporting / Light Utility
Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -KB-BK40 -
Ka-Bar - Jarosz Spear Point Flipper knife 7509 - titanium handle - knife
Destination of use: tactical
Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Sheath: Nylon
Design: by Jesse Jarosz
Production: TaiwanKB-7509 -
Buck - Buck 345 Vantage large - 0345BKS - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper systemAP0345BKS -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Ka-Bar - USSF Space Force Corser Folder Knife 5698SF - Blue GFN - knife
Intended Use: Sporting / Collection
Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logosKB-5698SF -
Ka-Bar - Dozier Folding Hunter knife 4062FG - Green Zytel Handle - knife
Intended use: tactical
Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steelDesign: by Bob Dozier
Production: TaiwanKB-4062FG -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Buck - Vantage Force Pro Combo - 0847BLX-B - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama USA
Blade: CPM-S30V stainless steel
Blade treatment: nitriding Titanium
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed Length: 112mm.
Overall length: 190mm.
Thick when closed: 11mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Buck logos
Notes: Hardened by Paul Bos2828B-COMBO -
Buck - Hunt Foldover 11100 - knife
Buck - Hunt Foldover 11100 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 122mm.
Total length: 215mm.
Thick when closed: 16mm.
Balance: -
Weight: 210g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -B11100 -
Buck - King Charles 550 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -buck -
Buck Lightning HTA II Pocket Knife - Model 175 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -00175 -
Buck 171 Mayo Waimea BOS S30V Titanium Framelock Folding Pocket knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box00171 -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
-
Buck - Vantage Force Pro - 0847BLS coltello
DISPONIBILE UNICAMENTE CON LAMA PARZIALMENTE SEGHETTATA Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Nitrurazione al Titanio
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828B -
Buck - Vantage Force Pro A-TACS Camouflage - 0845CMS-B coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stonewash
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828CAMO -
Buck - Vantage Force Pro Marine - 0847ODX-B - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stonewashed
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828G -
Buck/TOPS - CSAR-T Knife - Black G-10 + Multitool Set - 0095BKSTP-B - knife
Collaboration between TOPS and BUCK for this CSAR-T 095, designed as a heavy-duty pocket knife for use by military professionals.
The shape of the blade is "modified tanto." This means that the traditional angle of a tanto blade is slightly curved. It is extremely strong, with a thickness of 4.4 mm and a weight of 247 grams.
The ring at the end of the handle can be used as a screwdriver, using the tool kit already provided, and + it is possible to use standard drill bits that also fit the drill. The included nylon sheath is MOLLE compatible, but can also be worn on a belt.
Intended use: Sporting / Multi-role / Military
Blade: stainless steel ATS-34
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 87mm.
Blade thickness: 4.5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 244g.
Closure: Liner Lock
Clip: removable stainless steel
Sheath: Nylon
Packaging: Unboxed/packaged, sold loose with its own sheath the screwdriver kits
Notes: Hardened by BOS - Screwdriver and extension set included0095BKSTP-B