Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

Intended use: Sports / Collection

Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

Intended use: Sports / Collection

Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 110 mm
Handle material: Titanium
Color:
Weight: 98 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: Italy

A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.

Destination: French regional collector's knife

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: Absent

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.

The Dellatorre is an elegant knife with an innovative design that redefines the classic pocket knife. Its name derives from the Val della Torre, a city located on the picturesque foothills of Piedmont, where Sandrin knives are born and worked.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.

Intended use: Sports / Collection

Total length: 180mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.

Sharper, thinner and harder than any blade ever made, TCK is an ultra-thin and easily portable folder.

This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.

Intended use: Sports / Collection

Total length: 198mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 80mm
Handle thickness: 6 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 60 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

The Lanzo, with its wave-shaped blade, is designed for cutting and slicing when you are not looking for a tipless knife. It takes its name from the winding "road" located at the foot of Piedmont, Italy, where Sandrin knives are born and made.
This sleek design made from patented tungsten carbide with Sandrin's patented StaySharp Technology ™ keeps a clean, sharp edge longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / Collection

Total length: 180 mm
Blade length: 79 mm
Blade thickness: 0.0889 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98 mm
Handle thickness: 10.5 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slip joint
Country of production: Italy

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.

Intended use: Regional

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Intended Use: Regional / Collection

Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Laguiole En Aubrac - Horn of Buffalo - knife collection

Destination : Knife regional French collector

Blade: 12C27 Swedish stainless steel in 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm .
Overall length : 220 mm .
Weight: 68 g .
Folders : Stainless steel brushed
Heads : Absent
Closure : Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Buffalo Horn
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Mcusta - Series Katana - MC-0041C - knife

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Mcusta - Riple knife - MC-0142 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Laguiole en Aubrac - Bone with double blosters carbon - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection

Intended use: Collection / Sports

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en Aubrac

Laguiole en Aubrac - Double Head - Ebony Wood - knife collection

Intended Use: Regional / Collection

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: ebony
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 110g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Laguiole En Aubrac - Horn Classic 11 cm - Knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Horn Classic - knife

Intended use: Collection / Sports

Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac

Laguiole En Aubrac - Buffalo Brut de forge and knife - knife

Destination: Knife regional French collector

Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None

Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection

Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: buffalo horn with insignia hammered
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: fossil ivory and carbon fiber
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

ATTENTION: as this is a handmade product, the external appearance (colors, finishes, etc.) differs from the photographed piece.

Intended use: Regional / Collection

Type of production: artisanal
Blade: 12C27 stainless steel
Lama production: France
Handle: Cattle Horn
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 220mm.
Balancing: -
Weight: 92g.
Closure: rear retention springk
Clip: -
Sheath: -
Notes: rear corkscrew

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: SanMai steel with sharp stainless steel VG-10 at 59 / 60HRC and external chevron damask with 33 layers nickel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -