Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Coltelleria Collini exclusive - Available in only 33 numbered examples on blade and box

Intended use: collection / EDC / CQD

Type of production: industrial, limited
Blade: Japanese laminated stainless steel (San Mai) with cryogenically hardened 61.5HRC CoS cutting edge; with double concave shank in the strong of the blade
Blade treatment: satin finish
Country of manufacture: Italy
Handle: made of Titanium, machined from solid, with integral Frame Lock system with removable casement and safety made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 186g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: tapered Skull Crasher engaged in the tang - Limited and numbered edition of only 33 pieces serialized on the blade and box
Box: cardboard, numbered, with ExtremaRatio and Coltelleria Collini logos

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: briar
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

ANZU is the new knife from Fox Knives inspired by the creature of the Mesopotamian religions; a powerful figure who challenged the authority of the gods by stealing from the god Enlil the Table of Destinies, an object that, when possessed, confers the power to control the Universe. Through this act of rebellion, Anzu became an example of power, strength, precision and determination, characteristics that also distinguish the new Fox Knives knife designed by Les George.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: anodized aluminum with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 120g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade finish: Tumbled & Satin
Handle: handcrafted flamed titanium
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 201mm.
Thickness when closed: 11mm.
Weight: 115g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.



Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V anodized
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 101g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Intended Use: EDC/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/60HRC 
Blade treatment: Satin
Handle: Titanium billet
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thickness when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel knocker
Clip: Retractable, machined from solid wood.
Package: cardboard box with LionSteel logos
Notes: -

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

Intended use: Tactical / EDC

Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg Medford

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Helmsman is a knife designed and perfected in every single detail for its primary use in a nautical environment and represents the evolution of the BF2 V model presented on the Amerigo Vespucci School Ship in 2013 and dedicated to the most beautiful ship in the world.

The blade, which reaches a length of 87 mm, has a serration at the base while the tip has a flat grinding that allows symmetrical cutting work with wider support while the stone washed finishing process preserves more from corrosion in a marine environment.

Intended use: Sports / Tactical / For Sailing Boat

Type of production: industrial
Blade: N690Co 58HRC stainless steel with Stone Washed finish
Country of production: Italy
Handle: Anticorodal with stainless steel reinforcements
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 210mm.
Weight: 143g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Notes: ankle band / loose knots - small shackle - Tactical quick release hanger - Safety catch with open knife - Safety ankle fastener / Knot release

Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.

The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.

All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.

Intended use: Gentleman / EDC

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: Titanium GR5 Anodized
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Anodized Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

Multipurpose knife useful on many occasions, equipped with two blades. The main blade opens with one hand. Both blades are equipped with liner-lock closure.

Intended use: Sports multipurpose

Type of production: Industrial
Country of production: Italy
Blade: 440C 57HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 65mm.
Blade thickness: 2.5mm.
Length closed: 133mm.
Total length: 135mm.
Thick when closed: 17.2mm.
Weight: 98g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Maserin logos
Notes: Design by Moris Baroni
Accessories: Carabiner, can opener, bottle opener and slotted screwdriver

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run edition

Purpose: collection / sport

Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: blue titanium
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 144g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Intended use: Tactical / EDC

Type of production: artisanal seed
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Black PVD
Handle: Anodized titanium
Blade Length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total Length: 170mm.
Closed thickness: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Designed and built by Greg Medford - Free Comic Book

Purpose of use: Sportsman

Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total Length: 230mm.
Weight: 142g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearings

Purpose of use: Sportsman

Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio Consoli

Intended use: Sports / EDC

Type of production: Industrial
Production Lama USA
Blade: CPM-S30V stainless steel
Blade treatment: nitriding Titanium
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed Length: 112mm.
Overall length: 190mm.
Thick when closed: 11mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Buck logos
Notes: Hardened by Paul Bos

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

Intended Use: Collection

Type of production: Industrial
Production Country: Germany
Blade: stainless Damascus steel 300 layers, from the German battleship Tirpitz was sunk 12 November 1944
Blade treatment: -
Handle: aluminum to silicon AlMgSi1 anodized in color navy blue and walnut inlay in German
Blade length: 100mm.
Blade thickness: 3.5mm.
Overall length: 230mm.
Weight: 165g.
Clip: reversible and removable, stainless steel
Lock: Liner Lock
Packaging: PVC box exhibition that leaves "float" the knife in it, making it visible from all sides
Notes: Certificate of warranty - Case in red cotton - Exemplary limited numbered edition on the handle

Intended use: Tactical / Collection

Type of production: Industrial
blade production: U.S.A.
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Aluminium Blue
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 128g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Spyderco - Translucent Blue Manix 2 - C101PBL2 knife

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS BD-1
Treatment Lama: -
Handle: Edgetek FRCP polymer reinforced with glass fiber
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 82g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle: G10 Blue
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 184mm.
Thick when closed: 16mm.
Balancing: -
Weight: 100g.
Fastening: Bolt Action
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -