Sport, Military and Collectible Knives | Coltelleria Collini

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; imperceptible signs of oxidation on the blade that do not compromise its functionality
* Available on the market: Available on the market
* Sharpening: Professionally resharpened
* Marks on blade: Barely noticeable signs of oxidation on the blade that do not compromise its functionality
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Fallkniven A1 Zytel is one of the most highly regarded survival knives for its sturdiness, reliability, and build quality. This version features the renowned laminated VG10 steel blade, a design that combines excellent edge retention with greater resistance to mechanical stress, making it ideal for heavy-duty and outdoor use.

The knife shown here is in excellent overall condition. The blade has only a few minor superficial signs of oxidation, which are purely cosmetic and do not compromise the knife’s performance, structural integrity, or functionality in any way. This is an excellent opportunity to purchase a classic Fallkniven, ready for use and perfect for both field use and an outdoor knife collection.

Intended Use: Outdoor / All-Round Utility

Blade: Hidden tang made of SanMai (laminated) stainless steel (VG-10/420J2) at 59 HRC with a satin finish
Handle: Kraton
Blade Length: 160 mm.
Blade thickness: 6 mm.
Overall length: 280 mm.
Balance: forward, 0.5 cm from the lower guard
Weight: 305 g.
Sheath: Zytel, belt-mounted
Packaging: cardboard box with manufacturer’s logos
Notes: Previously purchased knife, sourced from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with a few minor signs of age on the guard and pommel
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: None
* Marks on handle: A few minor signs of age on the guard and pommel
* Box: Included
* Sheath: Included and like new
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Fallkniven SK6L Krut represents the perfect blend of Scandinavian tradition and modern high-end knife craftsmanship. Inspired by the great work knives of the Swedish forests, it is designed to confidently tackle the most demanding outdoor activities, from hunting to bushcraft, without sacrificing its signature Nordic elegance.

Its sturdy construction, handle made of fine figured birch, and CoS cobalt-laminated steel blade with a convex grind offer an ideal balance between strength, cutting performance, and edge retention. Rounding out the package is a high-quality leather sheath, designed to ensure safe transport and quick access to the knife.

“Krut,” an old nickname given to Swedish soldiers about two centuries ago and meaning “gunpowder,” evokes the rugged and reliable spirit of this model: a knife designed to accompany the user on any adventure, built to last a lifetime.

Intended Use: Hunting / Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: Hidden tang made of laminated stainless steel (SanMai) CoS at 60 HRC
Blade Finish: Satin
Handle: Figured birch wood with a through-guard and nickel silver pommel
Blade Length: 160 mm.
Blade thickness: 6 mm.
Overall length: 280 mm.
Weight: 268 g.
Sheath: Leather, belt-mounted, for vertical carry
Packaging: Cardboard box with manufacturer’s logos
Notes: Previously purchased knife, from a private collection

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: acquired from a private individual, previously purchased
* Condition: excellent, no marks on the blade or handle, only a few minor signs of wear on the Kydex sheath
* Available on the market: still available, though with a different handle and finish
* Sharpening: factory-sharpened
* Marks on blade: none
* Marks on handle: none
* Box: not included (TOPS models are sold without a box)
* Sheath: included, with some minor signs of wear
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a knife that has been appreciated by survival enthusiasts for many years and is designed to handle any outdoor situation. Featuring a full-tang blade with a distinctive multi-section profile—ideal for cutting, carving, splitting, and skinning—it offers exceptional versatility. Crafted from 1095 carbon steel with a protective coating and an ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended Use: Sports / Collectible

Production Type: Industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating”
Handle: Micarta
Blade Length: 160mm.
Blade Thickness: 6.5mm.
Overall Length: 302mm.
Balance: at the lower guard
Weight: 595g.
Sheath: thermoformed Kydex, with dual multi-position clip
Notes: Designed by Tom Brown, featured in the film The Hunted starring Benicio Del Toro—entirely made in the USA—each knife is numbered.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The SOG Forge FG01-L is a knife of extraordinary beauty and build quality, combining Japanese craftsmanship with modern production techniques.

The blade, forged using a hammering technique, features a unique texture that is one-of-a-kind for each piece. It is made of San Mai steel, with a VG-10 cutting edge and 420J2 outer layers, a combination that ensures an excellent balance between sharpness, edge retention, and durability.

The glass-reinforced nylon (GRN) handle is designed with perfectly contoured inserts to provide optimal balance and a secure, comfortable grip. The knife is complemented by an elegant premium leather sheath, enhanced with a colored fabric insert and a button closure.

Manufactured in Japan, the SOG Forge FG01-L evokes an era when honor and master craftsmanship were fundamental values. An object that is not merely a tool, but a true collector’s item destined to stand the test of time and be passed down from generation to generation.

Intended Use: Collectible / Sport

Production Type: Industrial
Country of Origin: Seki - Japan
Blade: SanMai laminated stainless steel with a VG-10 cutting edge and 420J2 outer layers, featuring a concave grind
Blade Finish: Hammered and Brut de Forge with a satin-finished portion of the cutting edge
Handle: Three-dimensionally shaped GRN (Glass Reinforced Nylon)
Blade Length: 160mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Weight: 290 g.
Sheath: Leather, with an insert of fine Japanese fabric, which varies from sheath to sheath
Packaging: Cardboard box with SOG logos
Notes: Knife from a private collection, previously purchased

Discover the new Mcusta Damascus Tanto: a knife that combines the timeless elegance of traditional Japanese blades with top-tier modern performance.

Crafted from SPG-2 Powdered High Speed Tool Steel, it offers exceptional sharpness and superior edge retention. The Damascus blade, with a matte gray finish and hammered texture (tsuchime), immediately catches the eye and evokes authentic Japanese craftsmanship.

The handle, inspired by classic Japanese swords, is made of genuine stingray leather covered in black leather with a tsuka-maki-style wrap: a choice that blends tradition and innovation, ensuring a secure, stable, and comfortable grip. The full-tang construction guarantees strength and durability, while the perfect balance gives you total control in every use.

It is not just a knife, but a true piece of character, where precision and the samurai spirit meet.

Intended use: Collectible / Sport

Production type: industrial
Blade: full tang in laminated Damascus steel, with a central core of SPG2 at 61/62 HRC and outer layers of R-2
Blade finish: hammered (Tsuchime)
Country of manufacture: Japan
Handle: genuine stingray leather (Samekawa) grip with Tsuka-Maki leather wrapping (Tsuka-Gawa)
Blade length: 160mm.
Blade thickness: 4.2 mm.
Overall length: 285 mm.
Weight: 215 g.
Sheath: leather, belt-mounted, for vertical carry
Packaging: box made of Paulownia wood, with manufacturer’s logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: withdrawn from a private collection, previously purchased
* Condition: excellent, little use and not heavy use
* Available on the market: still available, although with a different handle
* Sharpness: factory sharp, little wear
* Marks on blade: minimal marks on blade treatment that do not compromise its use in any way
* Marks on handle: minimal signs of use
* Box: not present, as with most Tops models
* Sheath: present, with minimal signs of wear
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a knife that has been appreciated by survival enthusiasts for many years and is designed to handle any outdoor situation. Featuring a full tang blade with a distinctive multi-section profile—ideal for cutting, carving, splitting, and skinning—it offers exceptional versatility. Made of 1095 carbon steel with a protective coating and ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended use: Sports / Collection

Type of production: industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating” (anti-reflective/non-slip)
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 302 mm.
Balance: at the lower guard branch
Weight: 595 g. (744 g. including sheath)
Sheath: Kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased and used
* Condition: Overall good, with marks and scratches on the blade and guard. The sheath shows signs of wear.
* Commercial availability: Discontinued
* Edge: Original
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our internal laboratory

The ExtremaRatio 39‑09 Operativo is a tactical collector's knife that combines the prestigious Italian military tradition with the precision of modern engineering. Inspired by the silhouette of the 1939 "paratrooper assault dagger", this model is built with premium materials and military-grade finishes that meet operational standards.

Its matte black coating, absence of flashy logos, and overall sturdiness make it ideal for discerning collectors, tactical blade enthusiasts, and those who value operational tools with strong symbolic meaning.

Every detail, from the Böhler N690 steel blade to the Forprene handle, is designed to ensure a balance of aesthetics, functionality, and reliability.

Intended use: collection / display / symbolic tactical use
Production type: high-end industrial manufacturing
Country of production: Italy
Blade: Böhler N690 steel, hardened (~ 58 HRC)
Blade finish: black oxide coating (MIL‑C‑13924 burnishing, non-reflective)
Handle: black Forprene
Blade length: 195 mm
Blade thickness: 6.3 mm
Total length: 319 mm
Weight: 338 g
Locking mechanism: fixed blade (not a folding knife)
Packaging: standard manufacturer box / rigid thigh sheath / nylon leg sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: acquired from a private collector, previously purchased
* Condition: good, unused
* Availability: still available on the market, in a different version
* Sharpening: factory edge, excellent condition
* Blade marks: some near the handle, likely caused by contact with the sheath
* Handle marks: none
* Box: not included, as with most Tops models
* Sheath: included, with a superficial cut (see photos) near the snap button
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

The Silent Hero was designed by Anton Du Plessis, then Head of Operations for the Silent Heroes Foundation Special Interdiction Unit, whose mission was to fight poaching in South Africa. This knife needed to be durable, versatile, and able to withstand field use — requirements that shaped the design of both the blade and the handle. It is built to handle heavy-duty tasks.

The ergonomic handle ensures a secure grip. The hole in the lower guard branch can be used to attach the knife to a stick or pole when needed.

The blade features a finger choil that allows for a firm grip and precise control for detailed cuts. Its recurved tip design makes the knife ideal for slicing while providing extra tip strength. This makes it perfect for bushcraft, survival, and tactical applications.

The black leather sheath is robust and complements the knife perfectly.

Intended use: Sport / Collection

Production type: industrial
Blade: 1095 carbon steel 58HRC with “Sniper Gray” finish
Handle: Micarta
Blade length: 160mm
Blade thickness: 4.8mm
Total length: 294mm
Balance: aligned with the guard branch
Weight: 321g (439g with sheath)
Sheath: leather
Notes: each knife is individually serialized

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: acquired from a private collector, previously purchased
* Condition: good, lightly used and not heavily worn
* Availability: still available on the market, though with a different handle version
* Sharpening: factory edge, slightly worn
* Blade marks: none on the treated area, slight oxidation spots on the edge
* Handle marks: none
* Box: not included, as with most Tops models
* Sheath: included, with friction marks on the Kydex and oxidation on the metal clips
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a survival knife highly appreciated for many years by outdoor enthusiasts, designed to tackle any wilderness challenge. Featuring a full tang blade with a distinctive multi-section profile — ideal for cutting, carving, chopping and skinning — it delivers outstanding versatility. Made of 1095 carbon steel with a protective coating and an ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended use: Sport / Collection

Production type: industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating” (anti-glare / anti-slip)
Handle: Micarta
Blade length: 160mm
Blade thickness: 6.5mm
Total length: 302mm
Balance: aligned with lower guard branch
Weight: 595g (744g with sheath)
Sheath: tactical Kydex with dual multiposition clip
Notes: Design by Tom Brown, featured in the film “The Hunted” with Benicio Del Toro, handmade in the USA, each knife individually numbered.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, with superficial cosmetic marks on the blade due to actual use, which in no way compromise its functionality and use
* Available on the market: On the market
* Sharpening: Resharpened
* Marks on blade: Several superficial cosmetic marks on the burnishing
* Marks on handle: None
* Box: Present and complete
* Sheath: Present and in excellent condition
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Born from the growing demand of demanding professionals, Extrema Ratio presents ONTOS—a field knife designed to tackle any challenge. The name, derived from the Greek word for “the thing,” represents the perfect synthesis of strength, versatility, and reliability. Compact but extremely durable, ONTOS is the ideal companion in any situation, thanks to its partially serrated blade that always guarantees a sharp, ready-to-use cut.

Its nylon thigh sheath, equipped with the MOLLE system, is designed to remain firmly anchored even in the most difficult conditions, when the soldier is forced to give up his primary tactical equipment. And for those looking for an extra level of preparedness, a survival kit is available, sold separately, to be attached directly to the knife sheath.

Intended use: Heavy Utility

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: MIL-C-13924 burnishing
Handle: Forprene
Blade length: 168mm.
Blade thickness: 6.3mm.
Total length: 299 mm.
Balance: advanced
Weight: 411 g.
Sheath: nylon thigh sheath, modular, compatible with M.O.L.L.E. systems.
Packaging: Cardboard box with Extrema Ratio logos
Notes: knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: New, never used, no original box
* Commercially available: Still in catalog, but now offered without “9th Col Moschin” logos on the blade
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, new
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

Commissioned and officially adopted in 2002 by the well-known 9th Incursor Rgt. “Col Moschin”, this model expresses the quintessence of the pure combat knife.

Inspired by the daggers with asymmetric blade and straight but oriented handle of the Arditi, from which the Regiment draws its vestiges, it has been reworked in a modern key. The center of gravity is strongly set back, the point particularly piercing. It is light, maneuverable and intuitive.

Every new raider gets one, every new raider is trained to use it to the fullest.

Intended use: Collector/Tactical/Military

Blade: N690Co 58HRC stainless steel with Desert Warfare finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: set back, 1 cm. from the lower guard branch
Weight: 264g.
Sheath: Nylon, modular, thigh or belt, with removable inner plastic shell
Notes: previously purchased knife, from private collection

Born out of the growing demand of demanding professionals, Extrema Ratio presents ONTOS - a field knife designed to meet any challenge. The name, derived from the Greek “the thing,” represents the perfect synthesis of toughness, versatility and reliability. Compact yet extremely durable, ONTOS is the ideal companion in any situation, thanks to its partially serrated blade that always ensures a sharp, ready-to-use cut.

Its nylon thigh scabbard, equipped with the MOLLE system, is designed to stay firmly anchored even in the harshest conditions, when the soldier is forced to give up his primary tactical equipment. And for those seeking an extra level of preparedness, a survival kit, purchased separately, is available to attach directly to the knife sheath.

Intended Use: Heavy Utility
Production Type: Industrial
Country of manufacture: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 168mm.
Blade thickness: 6.3mm.
Total length: 299mm.
Balance: advanced
Weight: 411g.
Sheath: nylon, MOLLE compatible
Packaging: cardboard box with Extrema Ratio logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued, only produced in 90 examples.
* Sharpening: Factory sharpened
* Marks on blade: A few small marks from being inserted into the scabbard and a couple of small oxidation spots
* Marks on handle: None
* Box: -
* Scabbard: Originally sold without a scabbard, offered here with an aftermarket Nylon thigh piece.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Recommended Use: hiking / heavy utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang, Calmax carbon steel (A8 Modified)
Blade finish: Satin
Handle: Micarta
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 288mm.
Balance: advanced
Weight: 355g.
Sheath: marketed without a scabbard, offered here together with a generic aftermarket nylon thigh piece
Packaging: -
Notes: knife made in only 90 examples for members of the MCKF forum, which was concerned with designing knives primarily for outdoor/bushcraft use by experimenting with exotic steels not used on a large scale-the physical production of the models was then entrusted to LionSteel of Maniago (PN)

The USMC Fighter model is our modern and improved version of the classic multi-purpose knife made famous by the United States Marines.

This fixed blade is 6.5mm thick and made of CPM-S35VN sintered stainless steel with Black DLC treatment, measures nearly 30cm. in total length, has G-10 grips with a three-dimensional machined surface, a two-piece Titanium guard with DLC treatment, and a billet Titanium pommel with DLC treatment.

This unique full tang design has all the advantages of a classic slide-over construction without compromising strength, as would be expected from a Medford! With handcrafted brown leather sheath, it is a true 21st century combat knife.

Intended Use: Tactical/Collection

Type of manufacture: MidTech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN steel
Blade Finish: Black DLC
Handle: Titanium Guard and Pommel, and G10 three-dimensionally machined grips
Blade Length: 170mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balance: set back 1cm from the guard branch
Weight: 508g.
Sheath: leather, belt, for vertical carry, handcrafted
Packaging: nylon pouch, with zipper closure and Medford logos, certificates of warranty and authenticity, cardboard box
Notes: designed and built by Greg Medford

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory.
* Marks on blade: Marks and abrasions.
* Marks on handle: Small signs of wear and tear.
* Box: Present, not complete (absence of warranties and plastic bags).
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

Commissioned and officially adopted in 2002 by the renowned 9th Incursor Rgt. “Col Moschin,” this model expresses the quintessence of the pure combat knife. Inspired by the daggers with asymmetric blade and straight but oriented handle of the Arditi, from which the Regiment draws its vestiges, it has been reworked in a modern key. 

The center of gravity is strongly set back, the point particularly piercing. It is light, maneuverable and intuitive. Every new raider receives one, every new raider is trained to use it to the fullest.

Intended use: Collector/Tactical/Military

Blade: N690Co 58HRC stainless steel with Desert Warfare finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: set back, 1 cm. from the lower guard branch
Weight: 264g.
Sheath: modular tactical, thigh or belt, Nylon
Notes: -

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Condition: USED
* Commercially available: available
* Sharpening: resharpened by our internal laboratory
* Signs on the blade: has superficial scratches on the entire blade on both sides of the blade (visible in the photos) which do not compromise the quality but only the aesthetics
* Signs on the handle: None
* Box: YES
* Sheath: Yes
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

The Giant Mamba has a tanto blade in Böhler N690 steel, 6.3 mm thick with a hardness of 58 HRC, flat edge and full-length lightening fuller.

The Forprene handle with threaded tang lock makes the knife solid and well-balanced. The sheath, M.O.L.L.E. compatible, is made of shock-absorbing nylon with a conical guide for quick insertion and extraction and a system that prevents shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and an ambidextrous reversible safety: simply pressing the trigger unlocks the blade.

Intended use: Tactical / Multi-role

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Extrema Ratio, on the occasion of the 10th anniversary of COM.FO.SE., presents a version in a limited series of only 70 pieces, "A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION". 

A.S.F.K. (Assault Special Forces Knife) is the dagger dedicated to and acquired by the Army Special Forces Command. This model recalls the tradition of arditism and the bloody trench battles punctuated by assaults with a bladed weapon. A.S.F.K. is a trench knife reimagined with a modern twist.

A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weatherproof, dustproof and shockproof. Inside is a metal plate with the numbering of the series limited to only 70 pieces.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing Geotech Camo
Handle: Forprene
Blade Length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balance: backward
Weight: 413g.
Sheath: cordura, M.O.L.L.E. compatible.
Packaging: thermoplastic collectible case with logos 
Notes: limited and numbered edition made in only 70 pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2015
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended Use: Tactical/Military/Survival

Country of production: USA
Type of production: semi-artisanal
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch
Weight: 585g.
Sheath: in kydex, tactical, with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, each knife has a serial number on the blade.

Intended Use: Tactical/Military/Survival

Type of production: Made in the USA, semi-crafted
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta RMT (Rocky Mountain Tread)
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch.
Weight: 595g.
Sheath: made of kydex, with double metal multi-position clip
Notes: Design by Tom Brown; used in the 2003 film "The Hunted / The Prey" starring Benicio Del Toro and Tommy Lee Jones

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection

Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Vintage

Type of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knife

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM).  Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Tactical

Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent condition

Tops - Tom Brown - The Tracker

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 595g.
Closure: -
Clip: -
Sheath: in kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.

The Task series has been designed for all everyday cutting jobs.

The partially symmetrical blade with flat edge on both sides. The hollow part of the blade after the guard, which separates the sharp part from the handle, has been made to house the index finger during use, creating a grip point near the sharp part for better control while using the knife.

This feature, together with the support grip on the back of the knife, allows a better grip while avoiding the slipping of the hand on the blade. This allows you to carry out most cutting jobs with higher pressure.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Desert Warfare (Burnished with laser engraving)
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Weight: 275g.
Sheath: Cordura
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.

Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Invia commenti
Cronologia
Salvate
Community

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

SILENTE is the name of the knife taken from the motto "SICUT NOX SILENTES" by N.O.C.S. Central Security Operations Unit, special anti-terrorist unit of the State Police.

SILENTE was presented to the Department, the Authorities, the Minister of the Interior and the Chief of Police on the occasion of the forty-year ceremony of the foundation of the NOCS.

SILENTE is a unique model of its kind that fulfills equally unique needs: the handle is divided into two parts and creates the handle of a clamp placed in the end of the handle. With it, in addition to taking on everything that has the appropriate dimensions, it is possible to cut wire, wire, steel cables, etc. and last but not least, it can be used as a window breaker, given the tungsten carbide insert at the end.

The sheath protects the cutting edge during all these uses, allowing it to be used safely, but it can also release the blade with a fast and silent retention system. Adaptable to thigh use and applicable to the M.O.L.L.E system, it is integrated into the operator's equipment using the least possible space.

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 309mm.
Weight: 338g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Notes: a multi-purpose pliers are integrated in the handle for cutting reticulated and cables or can also be used as glass breakers

modern version of the classic USMC produced by Medford

Intended use: Tactical / Collection

Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg Medford

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Intended use: Regional

Type of production: Artisan
Lama production: Italy
Blade: carbon steel 1060
Blade treatment: -
Handle: buffalo horn with brass ring
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: 200mm.
Total length: 355mm.
Thickness when closed: -
Balancing: -
Weight: 238g.
Closure: -
Clip: -
Sheath: -
Package: -
Notes: single piece

Glock - 78 Field Knife - Olive - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

With saw on the back of the blade.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Knife developed together with the experts of the Department Jagdkommando materials, the special strength of the Austrian army.

The Task J is a multirole equipped with double guard to prevent accidental slippage of the hand on the blade. It comes with desert color standard of the knife sheath with automatic clutch, flap and stringer belt for fixing to the side. In it there is housed a flint connected to the sheath with a safety leash.

Use: Tactical
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade Treatment: Browning MIL-C-13924
Handle: Forprene
Blade length: 158mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Weight: 315g.
Sheath: Nylon thigh and ABS
Packaging: cardboard box with Extrema Ratio logos
Notes: fire steel including

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated LSS PGK steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel with jimping acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. 

The blade is heat treated and double tempered to a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Enhanced parrot's beak pommel and lower front guard aid in blade retention during chopping. Stainless steel hardware locks all the components into place.

Included is a Spec-Ops Brand fabric sheath with thermoformed puncture-proof kydex lining.

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Specifications:

Knife Name:  Model 451 Chopper

Designer:  Jeff Freeman

Overall Length: 11.8"

Blade Length: 6.5”

Blade Thickness:  3/16”

Blade Steel:  LSS PGK

 Blade Hardness:  59-61 HRC

Blade Style:  Full-Tang Fixed Blade, Drop Point

Coating: CerakoteTM Ceramic Firearms Coating

Handle Material: Machined G-10 or Canvas Micarta

Sheath Material: Spec-Ops Brand Basic Modular Sheath

Knife Weight: 0.66 LBS

Note from Jeff: Before joining the US Army, I worked for 5 seasons as a wildland firefighter based out of Sweet Home, Oregon. While there, I battled scores of wildfires throughout Oregon and the Western United States with a very skilled, hard-working and dedicated group of young men and women. My crew's radio dispatch call sign was "451". 

I've named this knife family the "Model 451" in honor of those crew mates past and present that put it all on the line for the protection of our wildlands.

Takeshi Saji - Bat 150 - Knife Craft

Intended Use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Overall length: 290mm.
Thick when closed: -
Balancing: -
Weight: 406g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

From the dynamic universe of the "Blade" film comes this authenticated and officially licensed reproduction of the "Blade Trinity", directed from the final film in the trilogy.

This piece dating back to 2005 was designed directly from the original film studio prop and measures over 30cm in length. Every detail has been precisely replicated to satisfy even the most demanding collectors.

The 16.5cm long blade is made of mirror-polished 420 stainless steel and the handle features an antique silver plated finish with solid metal parts and a black rubber handle.

Each dagger is accompanied by a black enameled wood and stainless steel display stand featuring BLADE's logo medallion, from which the blade can be removed for display.

This collectible is a must for fans of the daytime vampire hunter, Blade, played by Wesley Snipes, in his final conflict against the vampires in the film "Blade Trinity", written and directed by David S. Goyer.

Destination: Military/Tactic/Collection

Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -