Sport, Military and Collectible Knives | Coltelleria Collini

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Coyote Tan Idroglider
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: Advanced to 2.5cm. the branch of guard
Weight: 352g.
Closure: -
Clip: -
Sheath: Nylon compatible M.O.L.L.E.
Packaging: cardboard box with Fox logos
Notes: Survival Kit in aluminum box sealed, with its MOLLE compatible nylon sheath

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Saw wire
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* pencil

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

Based on knife maker Jonathan McNees' popular Killer B model, the ultra-compact Spyderco McBee proves that functionality is a matter of design, not size.

Made from CTS XHP, its Wharncliffe blade with saber grind offers both scalpel-like precision and impressive cutting power, as well as the ability to open it with one hand thanks to its distinctive round hole. The stonewashed blade locks via a sturdy Reeve Integral Lock (R.I.L.) integrated into one of the two solid titanium scales of the handle.

A pocket clip on the right side and a coated lanyard hole ensure convenient carrying, while the dotted accents on the pivot screws and handle faithfully reproduce McNees' distinctive style.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: CTS XHP sintered stainless steel
Blade finish: Stonewashed
Handle: Stonewashed titanium
Blade length: 39mm.
Blade thickness: 3mm.
Closed length: 59mm.
Overall length: 95mm.
Weight: 48g.
Lock: Frame Lock (Reeve Integral Lock)
Clip: Stainless steel, removable
Packaging: Cardboard box with Spyderco logos
Notes: Design by Jonathan McNees

Your most discreet utility tool, always in your pocket.

A modern take on everyday utility, the Box Key is a compact, non-locking knife designed by award-winning knifemaker Richard Rogers. The calibrated detent holds the 12C27 steel blade securely in place, allowing quick access for opening boxes, cutting tape, or opening mail.

The low-profile clip also serves as a money clip, while the lanyard hole in the stainless steel handle allows for easy attachment to a keyring. Essential, safe, and intuitive, the Box Key protects the edge when closed and is always ready for use when needed.

Intended use: EDC

Type of production: Industrial
Country of production: China
Blade: Sandvik 12C27 stainless steel
Blade finish: Stonewashed
Handle: Stonewashed stainless steel
Blade length: 31mm.
Blade thickness: 2.5mm.
Closed length: 51mm.
Total length: 82mm.
Weight: 28g.
Closure: Slipjoint
Clip: Stainless steel, removable, can also be used as a money clip
Packaging: Cardboard box with CRKT logos
Notes: Design by Richard Rogers

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

The Wander Tactical Smilodon Custom Edition is a high-end semi-custom knife designed to meet the needs of blade enthusiasts and demanding professionals.

This knife combines premium materials with a robust and functional design, ideal for outdoor activities, survival, and collecting. The D2 steel blade with a raw Dual Tone finish ensures superior wear resistance and long-lasting sharpness, while the black Micarta handle provides a secure and comfortable grip in any situation.

Each piece is handcrafted in custom production, ensuring exceptional quality and uniqueness.

Production Type: Handmade
Blade Production: Italy
Blade: D2 steel, 59/60HRC
Blade Treatment: Dual Tone Raw Finish
Handle: Micarta
Blade Length: 185mm
Blade Thickness: 5mm
Total Length: 360mm
Balance: Rear
Weight: 590g
Sheath: Thermoformed Kydex with Tek-Lok attachment
Packaging: -
Notes: Each knife is handmade and unique; slight variations in finishes, colors, and materials may be present compared to the photographed product.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Out of production, available in different finishes and configurations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

The Operator 7 model is huge! TOPS Knives has dared to create an imposing knife with a thick blade and solid handle, creating a balanced tool that excels as a true “workhorse.” At the same time, it retains that classic American combat knife aesthetic, looking as spectacular as it performs.

Made from 8 mm thick 1075 steel, the blade is differentially heat treated: the edge is impact resistant, while the spine is incredibly sturdy. The handle combines sand-colored Micarta on the lower part with black G10 on the upper part, offering optimal grip. Once assembled, the handle is over 2.5 cm thick, shaped to fit perfectly in the user's hand, just like an axe or hatchet handle.

Designed to be useful and comfortable, this knife is for those who don't hold back. It is at home with door kickers, survivalists, and weekend enthusiasts alike. The rounded handles and guard ensure comfort of use, while the finger choil allows for great precision in the most delicate cuts. The 16.5 cm of active edge covers most needs, and the weight of the knife helps to do most of the work itself. The included Kydex sheath with dangler attachment makes it easy to carry in any terrain.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel 58/60HRC
Blade treatment: Black River Wash (Stonewashed)
Handle: G10 Black and Micarta
Blade length: 184 mm.
Blade thickness: 8 mm.
Total length: 318 mm.
Balance: on the guard branch
Weight: 695 g.
Sheath: Kydex
Packaging: -
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased and from a withdrawn private collection
* Condition: Perfect, like new
* Available on the market: Knife from the late 1980s/early 1990s, out of production and difficult to find
* Sharpness: Factory sharp, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Sheath: Present, with some minor signs of wear on the back 
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Created in the early 1980s from the vision of legendary designer Al Mar, the 3004 “De Oppresso Liber” is much more than a knife: it is a symbol of tactical excellence and special forces spirit.

Produced in a very limited series in Seki, Japan, this fixed blade knife was designed to meet the extreme standards of the U.S. Army's SERE (Survival, Evasion, Resistance, and Escape) units.

The engraved motto — “De Oppresso Liber,” “liberate the oppressed” — directly echoes the ethos of the American Green Berets.

Refined, robust, and now highly sought after by collectors, the 3004 represents one of the most iconic chapters in the history of modern military knives.

Intended use: tactical/collection

Country of manufacture: Japan
Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: satin
Handle: brown micarta
Blade length: 155mm. 
Blade thickness: 4mm.
Total length: 267mm.
Balance: on the guard
Weight: 245g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - supplied with original unopened packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, with superficial cosmetic marks on the blade due to actual use, which in no way compromise its functionality and use
* Available on the market: On the market
* Sharpening: Resharpened
* Marks on blade: Several superficial cosmetic marks on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Present and in excellent condition
* Manuals, certificates, and warranties: Present
* Checked and certified by our internal laboratory

The M7 is one of lionSTEEL's most impressive outdoor knives: designed for the most demanding challenges, it combines generous dimensions with surprising maneuverability. Designed to meet the need to cut branches and tackle demanding hikes, it concentrates most of its weight on the blade to facilitate effective chopping and batoning operations.

Made with SOLID technology, the Micarta handle is carved from a single block using 4-axis milling, ensuring structural strength and a firm, secure grip in all conditions. The Sleipner steel blade is resistant to the most intense stresses and easy to sharpen.

The M7 comes with a Cordura-coated Kydex sheath, equipped with a belt loop with MOLLE attachment, for stable and versatile carrying.

A true field companion, ready to tackle any outdoor adventure.

Type of production: Industrial
Country of production: Italy
Blade: full tang, Sleipner steel 60/61HRC
Blade finish: Black MilSpec
Handle: SOLID, machined from a single piece of Micarta using 4-axis milling 
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 410g.
Sheath: Kydex and Nylon, modular, multi-position, MOLLE compatible
Packaging: Cardboard box with Lion Steel logos
Notes: knife from a private collection, previously purchased and used

The Wander Tactical Smilodon Compound Custom Edition is a high-end handcrafted knife designed to meet the needs of the most demanding blade enthusiasts and professionals.

This knife combines premium materials with a rugged and functional design, ideal for outdoor activities, survivalism and collecting. The D2 steel blade with Ice Brush finish provides superior wear resistance and long edge life, while the Micarta handle provides a secure and comfortable grip in any situation.

Each piece is carefully handcrafted in custom production, ensuring quality and uniqueness to each specimen.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Ice Brush
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 360mm.
Balance: backward
Weight: 615g.
Sheath: made of Kydex, thermoformed, with M.O.L.L.E. compatible belt loop attachment.
Packaging: offered by manufacturer without packaging, accompanied by certificate of authenticity
Notes: Each knife is unique and handcrafted

Wander Tactical Smilodon Custom Edition is a high-end semi-handcrafted knife designed to meet the needs of blade enthusiasts and the most demanding professionals.

This knife combines top-quality materials with a robust and functional design, ideal for outdoor activities, survival, and collecting. The D2 steel blade with raw finish ensures superior wear resistance and long-lasting sharpness, while the black Micarta handle provides a secure and comfortable grip in any situation.

Each piece is crafted with artisanal care in a custom production process, ensuring quality and uniqueness in every model.

Production Type: Handcrafted
Blade Production: Italy
Blade: D2 steel, 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 189 mm
Blade Thickness: 5 mm
Overall Length: 360 mm
Balance: Rearward
Weight: 590 g
Sheath: Thermoformed Kydex with Tek-Lok attachment
Packaging: -
Notes: Each knife is unique and handcrafted; slight variations in finish, colors, and materials may occur compared to the photographed product.

Intended use: Tactical
Production type: Custom
Country of manufacture: Italy
Blade: D2 steel with 59-61 HRC hardness
Blade finish: Raw Finish
Handle: Sculpted black Micarta
Blade length: 180 mm
Total length: 315 mm
Weight: 794 g
Packaging: Black Kydex sheath
Notes: Design inspired by Roman daggers and American combat knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued in this configuration.
* Sharpening: Factory sharpened
* Marks on blade: A few small marks given by time.
* Marks on handle: A few small marks given by time.
* Box: Present, very worn and with a few missing manufacturer's stickers.
* Scabbard: Present, in very good condition.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The 2007 Chris Reeve Green Beret 7” is an iconic knife designed by William H. Harsey, a legendary knife designer known for his expertise in tactical and military tool design.

William H. Harsey has a long career in the knife world, with a particular focus on creating combat and utilitarian knives prized for their functionality and durability. His experience and background in the armed forces helped shape his approach to design, which is reflected in knives such as the Green Beret 7”. His creations are renowned for the perfect balance of aesthetics, performance and durability. Harsey has collaborated with several top knife manufacturers, and his designs have become icons in the world of tactical equipment.

With its practical and precise approach, Harsey's Green Beret 7” stands out as one of the most sought-after tools for enthusiasts and professionals alike.

Intended Use: Collection/Allround/Fighter

Type of manufacture: handcrafted
Blade: CPM-S30 55/57HRC stainless steel with CeraKote treatment
Country of manufacture: USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade thickness: 5.8mm.
Total length: 315mm.
Balance: on the lower guard branch
Weight: 364g.
Sheath: SpecOps Nylon, made in the USA
Notes: knife made in 2007 with certificates and box, box with several signs of wear and lacking some manufacturer's stickers

Note: This product does NOT participate in the “Loyalty / Loyalty Program” discounts active in our online store

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: NOS Knife - New Old Stock - New from Stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: Minimal, given by time.
* Marks on handle: -
* Box: Present, original, like new
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The “Recon Tanto” is an iconic knife produced by Cold Steel, known for its reliability and sturdiness. First introduced in 1988, the model was designed to be a combat and survival knife with a design that combines functionality and durability.

Over the years, the “Recon Tanto” has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection/tactical/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: stainless steel VG-1
Blade treatment: painting
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: knife NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Dino Picco, knife maker and lead designer of Wander Tactical, has handcrafted a fixed blade model called Centuria that seamlessly blends the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended use: Collection

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: Kydex, multi-position, with belt loops and MOLLE compatible
Packaging: without packaging - supplied with certificate of authenticity and Wander Tactical warranty
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available
* Sharpness: Factory, never resharpened
* Marks on blade: none
* Marks on handle: None
* Box: NOT present
* Sheath: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our internal laboratory

Intended use: Combat / All Round Utility

Blade: N690Co 59/60HRC stainless steel
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade thickness: 5mm.
Closed length: -
Total length: 315mm.
Balancing: On the guard branch
Weight: 285g.
Closure: -
Clips: -
Sheath: Modular in fiberglass, Nylon and Cordura with stainless steel cable cutter
Note: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in good condition
* Commercially available: in production
* Sharpness: Original sharpness
* Marks on blade: signs of use
* Marks on handle: None
* Box: Original
* Sheath: /
* Checked and certified by our internal laboratory

Intended use: Survival/Utlity

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade Treatment: Black Hidroglider
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Balancing: Advanced to 3cm. from the guard branch
Weight: 340g.
Sheath: in Nylon, M.O.L.L.E compatible.
Packaging: cardboard box with Fox logos
Notes: Survival kit included with M.O.L.L.E. type attachments.

The survival kit contains:
* water container
* nylon strap
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tools
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* pencil
* fluorescent light stick

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 729g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt oaxant
Packaging: warranty certificate
Notes: Each knife is unique and handcrafted in every part

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory


Intended Use: tactical / collection

Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm. 
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened box

The Smilodon, commonly known as the saber-toothed tiger, was an extinct large feline that lived during the Pleistocene, between 2.5 million and 10,000 years ago. It was a member of the felid family and was distinguished by its unique features, particularly its huge saber-shaped upper canines.

The Smilodon was larger than present-day tigers, with a length of about 1.6-1.8 meters and a height at withers of about 1 meter. Its weight could range from 200 to 400 kilograms. The Smilodon's most distinctive feature were its upper canines, which could reach a length of more than 20 centimeters. These canines were extremely sharp and adapted for grasping and stinging prey. Smilodon is believed to have been a specialized predator, hunting large mammals such as Pleistocene herbivores. Its hunting technique was probably based on a powerful pounce and the use of its canines to maul the throat of prey. It is likely that its powerful bite was capable of severely damaging the bones of its victims.

Despite its impressive appearance, Smilodon was not closely related to present-day tigers, but represented a separate evolutionary branch. It is thought to have become extinct due to climate change and the disappearance of its main prey at the end of the Pleistocene.


Exclusive knife in entirely handmade "Smoke Gray" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Smoke Gray
Handle: Micarta
Blade Length: 190mm.
Blade thickness: 6.5mm.
Total length: 365mm.
Balance: backward
Weight: 682g.
Sheath: made of Kydex, thermoformed
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

Exclusive knife in entirely handmade "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:

Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.

Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.

Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.

Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.

Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.


Intended Use: Collection

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: "Comix" coloring, entirely made and painted by hand
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - comes with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio interno

Il KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari. 

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato