Sport, Military and Collectible Knives | Coltelleria Collini

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

Since 1890, in a pocket, backpack, kitchen drawer or on the table, Opinel has been synonymous with a nomadic art of living, natural spirit, moments of sharing and complicity.

Opinel - No. 07 Chestnuts, garlic and pitting

A knife for nature-loving foodies!

This pocket knife is used for cutting and peeling chestnuts, as well as peeling garlic or quickly removing stones and pits from fruit by making an incision. It is ideal for preparing jams and tarts Its small size means it fits easily into your pocket and its short, pointed and curved 4 cm blade is easier to handle than a long blade. Perfect as a useful and practical gift idea. This knife can be personalised.

Blade length :4 cm Stainless steel We use Sandvik 12C27 modified stainless steel. It is anti-corrosive thanks to the addition of chrome and requires no special maintenance. Its carbon content of at least 0.40% gives excellent cutting edge.

Blade hardness 57-58 HRC Safety ring Invented by Marcel Opinel in 1955, the Virobloc safety ring is fitted to all folding knives from the N° 06. Cut out of stainless steel, the Virobloc has two sections, one fixed and one sliding. In addition to locking the blade open (safety in use), it is now possible to lock the blade closed (safety in transport).

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

The Opinel N°3 Inox knife is a small-sized pocket tool, ideal for precision activities such as opening packages and crafting models. Its 4 cm martensitic stainless steel blade ensures high corrosion resistance and excellent cutting quality, maintaining sharpness even after prolonged use. The beechwood handle, sourced from PEFC-certified French forests, provides a comfortable grip and is treated with protective varnish to resist moisture and dirt. It is important to note that the Opinel N°3 does not feature the Virobloc locking system; therefore, the blade stays open through friction, requiring careful handling during use. This knife embodies the traditional values of the Opinel brand: simplicity, durability, and efficiency.

• Intended use: Opening packages, model making
• Production type: Industrial
• Country of production: France
• Blade: Martensitic stainless steel
• Blade finish: Satin
• Handle: Varnished beechwood
• Blade length: 40 mm
• Blade thickness: 1.5 mm
• Closed length: 55 mm
• Total length: 95 mm
• Closed thickness: 10 mm
• Weight: 7 g
• Locking mechanism: Friction (no locking system)
• Clip: None
• Packaging: -
• Notes: Corrosion-resistant blade; minimal maintenance required