Sport, Military and Collectible Knives | Coltelleria Collini

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Overall in excellent condition, has light surface scratches on the steel handle
* Available on the market: Seventh generation of the model, produced only between 1999 and 2001, currently out of catalogue and out of production
* Sharpening: Factory
* Signs on blade: None
* Handle marks: light surface scratches
* Box: Present, complete and in excellent condition
* Sheath: -
* Manuals, Certificates and Guarantees: Present
* Controlled and Certified by our in-house laboratory

Originally launched in 1987, the Co-Pilot was sold as a small travel knife with a two-inch blade, designed to be carried on airplanes so you never give up a handy pocket or money clip once you arrive at your destination. Times have changed, but the design continues to prove its full validity.

Intended use: Sporty/Collection

Type of production: Industrial
Country of production: Japan
Blade: In stainless steel ATS-55
Blade finish: satin
Handling: stainless steel
Blade length: 51mm.
Blade thickness: 2.5mm.
Closed length: 76mm.
Total length: 127mm.
Weight: 74g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: carton box, manuals and warranty
Note: Previously purchased knife, from a private collection

KNIFE FROM A PRIVATE COLLECTION
Origin: Acquired from a private collector, previously purchased – Serial number: 22-0028
Condition: Overall good condition, never used
Availability: Limited edition, currently out of production
Sharpening: Factory edge
Blade marks: Minor marks, the most visible being a couple of light scratches on the right side
Handle marks: None
Box: Not included
Sheath: Kydex sheath with Pohl Force autograph, showing signs of wear
Manuals, certificates and warranty: Not included
Inspected and certified by our internal laboratory

The Quebec series by Pohl Force is an iconic mission knife that remained at the top of the wish list of founder and designer Dietmar Pohl for several decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to reinterpret the base design.

Originally developed as a Ground Forces Combat & General Purpose Weapon, this multi-purpose knife was designed for the United States Marine Corps in the early 1950s. Although never officially adopted, it clearly proved its capabilities during the Vietnam War, especially in the hands of U.S. special forces. Nearly 70 years after its first design, the modern Pohl Force Quebec Two perfectly combines classic old-school styling with high-tech modern manufacturing.

Designer Dietmar Pohl further revised the original concept, expanding the knife’s functional range. The blade of the Quebec Two is made from D2 tool steel instead of Sleipner, offering higher carbon and chromium content, significantly improving cutting performance and corrosion resistance. The blade has also been optimized with a cutting edge extended by 10 mm and an added false edge on the spine.

The Pohl Force Prepper System is integrated into the handle, allowing survival items to be securely stored inside. A tool for opening the handle screws is included. The advanced Pohl Force sheath system significantly enhances usability. The highly sophisticated sheath, made from 2.5 mm thick Kydex with belt adapter and leg strap, ensures excellent carrying comfort and versatility.

Overall length: 315 mm
Blade length: 190 mm
Blade thickness: 6 mm
Weight: 382 g (558 g including sheath)
Blade material: D2 steel
Blade finish: Titanium nitride coating
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5 mm Kydex with removable Cordura belt attachments
Included accessories: —

Notes: Each knife is individually numbered and personally signed by Dietmar Pohl on the Kydex sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

Born from a collaboration with Alessandro Padovani, international martial arts and self-defense instructor and founder of Safer Faster Defense, the Wander Tactical Bad Medicine has been produced in a limited edition of only 12 pieces.

This knife embodies a lifetime of experience dedicated to real combat, firearms training, and modern defense, translating years of research and teaching into a blade designed for efficiency, robustness, and absolute reliability in critical situations.

Intended use: Tactical / CQB

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Acid
Handle: “F” Green Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 223 mm.
Balance: rearward
Weight: 204 g.
Sheath: thermoformed Kydex, with M.O.L.L.E.-compatible belt loop.
Packaging: accompanied by certificate of guarantee and authenticity.
Notes: Entirely handmade knife, in every part - Limited edition of only 12 pieces.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used and never removed from the sales box
* Available on the market: Out of production, limited edition of only 20 numbered pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Tactical/light utility

Type of production: Industrial
Country of production: Italy
Blade: Full tang in N690Co 58HRC stainless steel
Blade treatment: Black PVD
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balance: rearward
Weight: 195
Sheath: handmade vegetable-tanned leather, entirely handmade and hand-stitched
Packaging: wooden box with pyrographed logos
Notes: Limited edition of only 20 numbered pieces, on the blade, sheath, and wooden box - Knife previously purchased from a private collection - L.E.O. stands for Law Enforcement Only - designed by Tommaso Rumici

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: New, never used
* Commercially available: Larger limited edition and in VG10 steel, no longer commercially available, made only in 10 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: originally sold without packaging
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

This exclusive knife, withdrawn from a private collection, is a true rarity, never used and kept in perfect condition. It is a limited edition, produced in only 10 numbered examples, no longer commercially available. Each knife has been checked and certified by our in-house laboratory, guaranteeing authenticity and quality.

Designed for versatile use in bushcraft and as an all-rounder utility, this knife is handcrafted in the UK by renowned British knife maker Rob Bayley, best known for the model used by Bear Grylls in his first television appearances in 2007

Intended Use: Bushcraft / All Rounder Utility

Type of production: Handcrafted
Country of manufacture: United Kingdom
Blade: full tang in VG10 stainless steel
Finish: Satin finish
Handle: made of G10 with pin tubes and 300 stainless steel through-guard 
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 228mm.
Balance: backward
Weight: 230g.
Sheath: black leather, with loops for horizontal carry
Packaging: knife entirely handmade by British knife maker Rob Bayley - model famous for being used by Bear Grylls in 2007 during his first TV appearances, larger limited edition and in VG10 steel, no longer commercially available, made only in 10 numbered examples

The Laguiole Hunting Knife embodies the pinnacle of traditional French craftsmanship, designed for those seeking a rare combination of beauty and functionality. Featuring a handcrafted Damascus steel blade, this hunting knife stands out for the elegant wavy pattern on the blade, the result of a refined and complex technique.

The handle, made from genuine natural horn tip, gives each piece its own uniqueness, while the spine is adorned with fine hand-engraved guilloché – a signature of artisanal mastery. Solid, sharp, and extraordinarily elegant, it’s a collector’s item for true Laguiole enthusiasts.

Intended use: Collection / Hunting
Production type: Handmade
Country of origin: France
Blade: Welded Damascus steel
Blade finish: Visible Damascus, polished
Handle: Natural horn tip
Blade length: 120mm
Blade thickness: 3.5mm
Closed length: 140mm
Total length: 260mm
Closed thickness: 13mm
Weight: 190g
Locking mechanism: Slipjoint
Clip: None
Packaging: Leather sheath and gift box
Notes: Guilloché engraving entirely handmade, natural material handle – each piece is unique

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: New, never used and never taken out of its sheath.
* Commercially available: Made to order, with a waiting period of several years to receive it
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: originally sold without packaging
* Scabbard: Present
* Manuals, Certificates and Warranties: Leather tag imprinted with date of manufacture.
* Checked and Certified by our in-house laboratory

Intended Use: Bushcraft / All Rounder Utility

Production Type: Handcrafted
Country of Production: United Kingdom
Blade: full tang stainless steel RWL34
Finish: Satin finish
Handle: made of G10 with pin tubes and 300 stainless steel through-guard 
Blade length: 105mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 219g.
Sheath: black leather, with loops for horizontal carry
Packaging: knife entirely handmade by British knife maker Rob Bailey - model famous for being used by Bear Grylls in 2007 during his first TV appearances, before he made business deals with Gerber - branded bayleyknife 06/24 (June 2024)

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Availability: Discontinued
• Sharpening: Original sharpening
• Blade marks: /
• Handle marks: Minor marks
• Box: /
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Inspected and Certified: By our internal laboratory

The Extrema Ratio M.P.C. (Multi Purpose Compact) is an Italian-made folding knife designed to offer the durability of a fixed-blade knife in a compact and versatile format. Made with high-quality materials and precision techniques, it is ideal for tactical uses and field operations.

• Intended use: Tactical / Multi-role
• Production type: Industrial
• Country of origin: Italy
• Blade: Böhler N690 steel (58HRC)
• Blade finish: Testudo (brunished)
• Handle: Black anodized Anticorodal aluminum alloy
• Blade length: 113 mm
• Blade thickness: 6 mm
• Closed length: 149 mm
• Total length: 260 mm
• Closed thickness: 20 mm
• Weight: 240 g
• Locking system: Back lock with additional safety system
• Clip: Removable and reversible, brunished stainless steel
• Packaging: -
• Notes: The blade features partial serration for efficient cutting of cables and high-resistance fabrics.

The M.P.C. was developed to replace or complement a fixed-blade knife, combining the portability of a folder with the strength required for heavy-duty tasks. Its thick blade and robust locking system make it one of the most reliable tools in its category.

PREVIOUSLY PURCHASED KNIFE, RETRIEVED FROM PRIVATE COLLECTION
* Type: previously purchased knife, from a private collection
* Condition: "First Production Run" edition, like new, never used, never removed from the packaging, and never placed in the sheath
* Available on the market: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present, also includes a second new leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

The Bark River Ultra Lite Field Knife is a versatile knife designed to excel in bushcraft activities but capable of handling many other functions. Its clip/harpoon blade is made of CPM 3V steel, offering excellent resistance and holds its edge well, making it ideal for processing game and food preparation. However, it is important to protect it from moisture and acids, as it is not completely stainless; regular maintenance, such as cleaning and applying oil, is recommended to preserve its quality.

The handle is made from a wonderful desert ironwood burl, a precious wood that has a unique and variable appearance. Each handle is different, reflecting the value of the natural product. The entire design of the knife makes it an excellent tool for both practical use and for those seeking a distinctive item.

Intended use: Hiking / Utility / Bushcraft

Country of production: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burl
Blade length: 115mm.
Blade thickness: 3.2mm.
Total length: 213mm.
Weight: 125g.
Sheath: leather
Notes: knife from a private collection, like new, never removed from its packaging and never placed in the sheath - Out of production and no longer available on the market, differs from the standard production by the use of burl wood for the handle - "First Production Run" engraved on the blade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

Exclusive product created in collaboration with the YouTube channel PDT - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Imperceptible signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Total Length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: cardboard box, warranty certificate
Notes: knife used in a YouTube video review by Floriano of PDT

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

Type of production: Handmade
Country of Production: Italy
Blade: Sleipner steel at 60HRC
Blade Finish: PVD
Handle: Ironwood with FatCarbon Darkmatter guard and carbon fiber pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balance: set back 3cm from the guard branch
Weight: 265g.
Scabbard: handcrafted and hand-stitched leather
Package and certificate: cordura pouch and certificate of authenticity
Notes: unique knife and handcrafted for Coltelleria Collini in Busto Arsizio - no. 254

The J.Marttiini knife 1928-2018 90v. is a limited edition created to celebrate the 90th anniversary of J. Marttiini Knife Factory Ltd. Founded in 1928 by Janne Marttiini in Rovaniemi..

Knife numbered on the blade, series 1965 out of 2018 pieces produced

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Overall in very good condition
* Commercially available: no longer in production, difficult to find
* Sharpness: Original
* Marks on blade: No
* Marks on handle: No
* Box: No box
* Sheath: original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and Certified by our internal laboratory

Intended use: hunting

Intended use: collection

Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: brut de forge
Blade production: Finland
Handle: ebony
Blade length: 110mm
Blade thickness: 2.5mm
Closed length: -
Total length: 225mm
Balancing: -
Weight: 140g
Closure: -
Clips: -
Sheath: leather sheath with engravings 
Note:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

Intended Use: Collection / Light Utility

Type of production: Handcrafted
Country of Production: Italy
Blade: W2 steel at 60HRC
Blade finish: hamon made with selective tempering
Handle: mango wood, resin spacers and blue G10, 4mm carbon fiber pin
Blade length: 110mm.
Blade thickness: 4.8mm.
Total length: 235mm.
Weight: 210g.
Scabbard: leather, handmade
Packaging and certificate: cordura pouch and certificate of authenticity
Notes: unique and numbered knife, handcrafted especially for Coltelleria Collini - No. 297

Intended Use: Collection / Light Utility

Type of production: Handcrafted
Country of Production: Italy
Blade: W2 steel at 60HRC
Blade finish: hamon made with selective tempering
Handle: ebony wood, resin spacers and blue G10, 4mm carbon pin
Blade length: 110mm.
Blade thickness: 4.8mm.
Total length: 235mm.
Balance: backward
Weight: 210g.
Scabbard: leather worked and sewn by hand
Packaging and certificate: cordura pouch and certificate of authenticity
Notes: unique and numbered knife, handcrafted especially for Coltelleria Collini - No. 296

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: titanium nitriding
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard 

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard 

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.

The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.

The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.

The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.

The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.

The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.

The K1 equipment is completed with a polypropylene case ‌, complete leather sheath and underarm shoulder strap.

WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUM

Production Type: Artisan
Blade Production: Italy
Blade: Sleipner steel at 60HRC
Blade Finish: PVD
Handle: Black Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balance: set back 3cm from the guard branch
Weight: 265g.
Scabbard: handcrafted and hand-stitched leather
Package and certificate: cordura pouch and certificate of authenticity
Notes: unique knife and handcrafted for Coltelleria Collini in Busto Arsizio - no. 253

Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Knife withdrawn from private collection, dating back to the late 1980s, overall in very good condition - Never used, still has factory thread - Checked, certified by our in-house lab.

Intended use: Tactical / Collection

Type of production: handcrafted
Country of manufacture: USA
Blade: O1 carbon steel
Blade finish: satin finish
Handle: micarta and brass
Blade length: 190mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Balance: on the guard branch
Weight: 414g.
Sheath: Leather
Notes: knife withdrawn from private collection dating back to the late 1980s, overall in very good condition

Intended use: tactical

Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

special knife made by Wander Tactical in April 2021

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique piece

outdoor knife produced by Fox between the late nineties and 2004 - Sturdy and comfortable knife for camping and hiking use. This rare model is characterized by the coating of the blade with a titanium surface which technically increases the resistance to oxidation and to the thread holding. Complete with scabbard

Intended use: Sports

Blade: 440A stainless steel with titanium coating
Lama Italia production
Handle: pakkawood pledge
Blade length: 110mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 250mm.
Balancing: -
Weight: 285g.
Closure: Back Lock
Clip:
Sheath: Cordura sheath
Note: -

special prototype made by Wander Tactical in October 2020

Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: -
Handle: Green paracord
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 260mm.
Balancing: on the branch of gurdia
Weight: 201g.
Sheath: in kydex
Packaging: -
Notes: unique piece

Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:

Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox

Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: AUS-10A stainless steel
Blade treatment: Stonewashed
Handle: G-10
Blade length: 191mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: 10.4mm
Weight: 403g.
Closing: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -

Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Intended use: Outdoor / Tactical

Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Tommaso Rumici explains his knife: "Drawing the Octopus I wanted to create a knife that was versatile enough to be interesting for the various types of Fox customers: sporting, hunting and military, the result is, in my opinion, an excellent compromise between portability and performance: it will never be too big or heavy to have it with you in time of need. "

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel laminated SanMai 420J2 / VG10 to 60 / 62HRC
Blade treatment: Satin
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 240mm.
Balancing: -
Weight: 170g.
Sheath: in leather
Packaging: cardboard box with Fox logos
Notes: design by Tommaso Rumici

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: Cocobolo
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 140g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 160g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Destinazione d'uso: Sportivo / Collezione

Lama: in acciaio inox VG10
Manicatura: Fibra di carbonio
Lunghezza lama: 55mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 68mm.
Lunghezza totale: 117mm.
Bilanciatura: -
Peso: 56g
Chiusura: Frame Lock
Clip: amovibile e reversibile in titanio
Fodero: -
Note: Design by Chad Los Banos - Edizione a tiratura limitata e numerata, realizzata in soli 600 esemplari