Sport, Military and Collectible Knives | Coltelleria Collini

Mugello 16 cm horn cattle raw E-CMC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

The Barachin knife is a true gem of Piedmontese craftsmanship: featuring a hand-forged carbon steel blade and a handle made from fine local woods, it perfectly combines rural tradition with functional design. Designed to be opened one-handed thanks to its innovative tang-twist locking system without welds, this knife is ideal both for blade enthusiasts and those in search of a sturdy everyday tool.

Each piece is unique, finished with a rustic character that highlights its handcrafted nature, and comes with a certificate of authenticity certifying its handmade Italian origin. Perfect as a collectible or practical daily tool, the Barachin tells a story of valleys, skilled hands, and genuine materials, making it distinctive for lovers of tradition and those seeking authenticity.

Intended use: Everyday use / collectible
Production type: Handmade, entirely crafted in Italy
Country of production: Italy (Piedmont, Monregalese Valley)
Blade: Hand-forged carbon steel, salt-bath hardened and tempered
Blade finish: Raw (“rustic”) surface, finely worked edge
Handle: One-piece laburnum wood
Blade length: Approx. 8 cm
Blade thickness: Approx. 2 mm
Closed length: 110 mm
Total length: Approx. 193 mm (varies based on specific wood/handle)
Weight: 80 g
Locking system: Integrated tang-twist system that locks the blade without joints or welds
Packaging: Each knife comes with a handmade authenticity certificate
Notes: Each piece is unique, crafted by Danielo Mauro Blacksmith Forgemaster. Rustic finishes make each knife different – variability in materials and dimensions due to manual workmanship

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Knife from the 1980s withdrawn from a private collection, previously purchased
* Condition: Overall in good condition, mechanically perfect, shows some signs of wear and age on the wooden handle with a deep notch on the tang with material missing a couple of mm thick near the lanyard hole and some signs of age and wear on the steel heads and steel blade. The sheath is in good condition, never used on a belt, also with signs of age on the outer surfaces and on the automatic button
* Available on the market: Out of production since the 1990s
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Small scratches visible against the light due to age
* Marks on the handle: Small scratches on the steel heads and wood, part of the wood missing near the hole for the lanyard
* Box: Missing
* Sheath: Present and in good condition, with some signs of wear due to the passage of time
* Manuals, Certificates, and Warranties: Missing
* Checked and certified by our in-house laboratory

Intended use: Sports

Type of production: Industrial
Country of production: Japan
Blade: AUS-6 stainless steel with concave sharpening
Blade treatment: Satin finish
Handle: Cocobolo wood, steel heads, and brass internal plates
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm
Total length: 172mm.
Weight: 100g.
Closure: Back Lock
Sheath: sturdy brown leather with white stitching, belt loop, and snap button for fastening
Packaging: -
Notes: rare sports knife, practical and sturdy, produced between the 1980s and 1990s, previously purchased, withdrawn from private collection

This exclusive version of the Para 3 features a blade made of CPM 15V, an extraordinary steel that offers the highest wear resistance among all cold-working tool steels available today. With nearly 15 percent vanadium, its unique composition creates a microstructure rich in vanadium carbides, resulting in exceptional cutting performance and amazing edge retention.

The limited design of Spyderco's CPM 15V family of knives is further refined through a specialized heat treatment developed by renowned custom knife maker Shawn Houston. This Sprint Run edition of the Para 3 keeps all the proven elements of this iconic design intact, including the high-strength Compression Lock® mechanism and four-position pocket clip for unparalleled comfort.

To highlight its affiliation with the CPM 15V family, the knife features brown peel-ply textured G-10 grips, with Shawn Houston's “Triple B” logo laser engraved on the back of the blade.

CPM 15V is one of the most advanced and durable steels on the market, thanks to its high vanadium content that creates a rich microstructure of high-hardness carbides. This makes it ideal for those looking for long-lasting cutting performance, even in the harshest conditions. Its production is complex and expensive, but the result is a steel that not only resists wear and tear but also offers exceptional edge retention over time.

Type of production: Industrial
Country of manufacture: USA
Blade: Carbon steel CPM-15V
Blade Finish: Stonewashed
Handle: G10
Blade length: 74mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 183mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Sprint Run edition with tempering by Shawn Houston

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Dark Matter Gold carbon fibre grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Handle: wood (zebrawood)
Blade length: 71mm.
Blade thickness: 2,3mm.
Total length: 167mm.
Blade lock: SlipJoint
Weight: 42g.
Clip: absent
Packaging: cardboard box with Boker Plus logos
Notes: Tungsten carbide glass breaker on the back side

Designation of use: Utility

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang stainless steel RWL-34 61/62HRC
Blade finish: Satin
Handle: Micarta
Blade length: 79mm.
Blade thickness: 2.4mm.
Total length: 174mm.
Weight: 63g.
Scabbard: leather, with UltiClip attachment.
Packaging: cardboard box with Boker logos
Notes: Design by Alex Kremer

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle

Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion Steel

Purpose: Sportsman / Collectibles

Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 75mm.
Blade thickness: 3.5mm.
Closed length: 100mm.
Total Length: 175mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -

Intended use: collection / sport

Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De Villiers

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson Flipper

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Ghiandina 16 cm horn cattle raw E-GHC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Utility / Collection

Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: stag horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici

Folding hunting knife, small size and good quality / price ratio.

Blade steel: 440
Handle: Steel and wood cocobolo
Closure: Back Lock
Length closed: 100 mm.
Blade length: 70 mm.
Overall length: 173 mm
Weight: 95 g.
Clip: Stainless

Faithful reproduction of an Indian tomahowk

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: 420 stainless steel
Blade treatment: -
Handle: in wood with leather finishes
Blade length: 80mm.
Blade thickness: 40mm.
Total length: 440mm.
Weight: 355g.
Sheath: -
Notes: Excellent for display use, not suitable for real and heavy us

Intended use: Knife for collecting mushrooms

Type of production: industrial
Country of Production: Italy
Blade: Nitro B stainless steel
Blade finish: Satin finish
Handle: Cocobolo wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" Silvestrelli