Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Limited and numbered edition made of only 100 pieces - Opening via Carson Flipper system - Design by William W. Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, sheath shows signs of time and has poor retention of the knife
* Commercially available: Discontinued and company no longer in operation.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, with signs of time and poor knife retention.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10, handcrafted
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: absent
Notes: Design by W. Harsey - knife previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, the sheath and box show some minor signs of time
* Commercially available: Discontinued and company no longer operating
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with some signs of time
* Scabbard: Present, with some signs of time.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: cardboard box with Fantoni logos, warranty certificate with technical specifications
Notes: Design by W. Harsey - knife previously purchased, from private collection

use: Sportive / Tactical / Collection

Type of production: Industrial
Country of production: U.S.A.
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with purble anodizing
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run Edition 2019 available while stocks last

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. Harsey

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Anodized Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with Black Tungsten DLC finish
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

The new Zero Tolerance 0609 is a smaller, even more carry-ready version of the original Factory Custom 0606CF from ZT, RJ Martin, and Matt Martin. Like the original, it offers a clean, streamlined look yet also has highly detailed handle machining that adds both grip and visual impact. For even more visual “wow,” the 3D-machined handle is built of light-yet-strong titanium that ZT has anodized in an attractive bronze.

The 3.4-inch blade is CPM 20CV, which provides enhanced toughness and resistance to edge chipping. It also delivers superior hardness, corrosion resistance, and excellent edge retention. The drop-point blade has a two-tone finish: machined satin on the grinds with a stonewashed finish on the flats. The new 0609 opens manually with ZT’s KVT ball-bearing opening system and the handy flipper so it’s always ready when you want it.

Last—but certainly not least—you’ll notice the oversized See-Through Pivot (STP). Designed by RJ Martin, this unique, pivot is hollow in the center, letting you “see through” it. The See-Through Pivot adds another intriguing touch to this already-attractive knife.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. Harsey

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: stainless steel CPM-S35VN 61 / 62HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 116mm.
Overall length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with logos Fantoni
Notes: Opening via Carson Flipper system - Design by William W. HARSEY

Intended use: Tactical / Collection

Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Black PVD
Production Lama: Italy
Handle: Micarta type Loveless
Blade length: 90mm.
Blade Thickness: 4mm.
Closed Length: -
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Closed: -
Clip: -
Sheath: Kydex with Tech Lock
Notes: Design by W. HARSEY

Intended use: Tactical / Collection

Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Stone Washed
Country of production: Italy
Handle: Black G10
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Sheath: Leather
Notes: Design by W. HARSEY

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S35VN 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade Length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: LinerLock in titanium
Clip: Removable and reversible, in titanium
Package: Cardboard box with Fantoni logos
Notes: Opening by Carson Flipper system - Design by William W. Harsey

Destinazione d'uso: Tattico/Collezione

Tipo di produzione: industriale
Lama: in acciaio inox CPM-S35VN a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 90mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata a 2 cm. dal ramo di guardia inferiore
Peso: 124g.
Chiusura: -
Clip: -
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by W. Harsey