Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Spyderco - Cat - Satin 440C & Schwarz G10 - SC129GP - PRIVATSAMMLUNG - Messer
MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor
Verwendungszweck: Sporting/EDCProduktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-LogosSC129GP-CP -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Spyderco - Delica 4 SpyderEdge - C11SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 72g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C11SBK -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG -
Marttiini - Lapinleuku 120 Lapp knife 12cm - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some small marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Intended use: collection
Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polishing with handcrafted engravings
Production Lama: Finland
Handle: birch burl
Blade length: 120mm
Blade thickness: 2.5mm
Closed Length: -
Total length: 235mm
Balancing: -
Weight: 150g
Closure: -
Clip: -
Sheath: leather sheath with handcrafted engravings
Note:MAR-LAPP12 -
Spyderco - 1994 Michael Walker Carbon Fiber - C22CF - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, like new, with original case - Model "made in Switzerland" made in collaboration with Klotzli in 1994 in about 1,000 numbered examples on the blade (about 500 plain edge and about 500 partially serrated) based on a design by famous American designer Michael Walker. Knife that combines two qualities difficult to match, especially in those years; lightness and sturdiness. Elegant gentlemen, easy to open and close with one hand thanks to the Liner-Lock system, invented by Walker himself. Peculiarities of this very rare production are also the engravings on blade and clip made by excision and not by laser.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available Discontinued.
* Sharpening: Factory sharpened, perfect
* Marks on blade: no
* Marks on handle: no
* Box: Original leather pouch with zipper and spyderco logos.
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: sporting / collection
Type of production: industrial
Country of production: Switzerland
Blade: stainless steel ATS-34
Blade finish: Satin finish
Handle: carbon fiber with blue anodized titanium hardware
Blade length: 64mm.
Blade thickness: 2.4mm.
Length closed: 84mm.
Total length: 149mm.
Weight: 42g.
Closure: LinerLock in blue anodized titanium
Clip: blue anodized titanium
Notes: 1994 production, discontinued, numbered on blade (#625) - Design by Michael WalkerC22CF-CP -
Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife
Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory
Intended Use: Regional Italian / CollectionType of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like newAP-PATMU-CP -
Timberline - Aviator Pilot Survival Knife - Tanto Chisel Blade - TM94021 - PRIVATE COLLECTION - knife
Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / CollectionType of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like newTM94021 -
Buck - Model 500 - 1987 Canadian Loon - Limited Edition - PRIVATE COLLECTION - knife
Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended Use: CollectionType of production: Industrial
Blade Production: USA
Blade: Engraved 420HC stainless steel
Blade Finish: Polishing
Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
Blade Length: 78mm.
Blade thickness: 2.5mm.
Length closed: 111mm.
Total length: 187mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Back Lock
Package: wooden box, original care and maintenance manuals and warranty certificate of the time
Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.BU-500CL -
Meyerco - The Strut'N'Cut First Production Run by Blackie Collins - PRIVATE COLLECTION - knife
Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/Sportsman
Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in AltlantaTrivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.MCSTRH -
Spyderco - Delica 4 Wharncliffe Plain - C11FPWCBK - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory
Intended use: Sports
Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpeningAP-C11FWCBK -
Spyderco - Dragonfly 2 Plain - K390 Blue FRN - C28FP2K390 - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC28FP2K390 -
Spyderco - Delica 4 Flat Plain - K390 Blue FRN - C11FPK390 - knife
Intended use: Sports
Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC11FPK390 -
Spyderco - Dragonfly 2 - Black Serrated - C28SBK2 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -C28SBK2 -
Frank Centofante - Mother of Pearl Lockback Gentleman knife - PRIVATE COLLECTION - handmade knife
Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008CE-008 -
Spyderco - Sage 1 - Carbon Fiber - C123CFP knife
Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without boxSC123CF-A -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB -
Spyderco - Ouroboros by Paul Alexander - C207G - knife
Intended use: Utility / Hunting
Type of production: Industrial
Country of production: Seki - Japan
Blade: Stainless Steel VG-10
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 72mm.
Blade thickness: 2.5mm.
Closed Length: 106mm.
Overall length: 175mm.
Thick when closed: 10mm.
Weight: 102g.
Closure: Front Lock
Clip: reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Paul AlexanderSC207G -
Spyderco - Delica - Titanium and Damascus - C11TID - knife
Intended Use: Collection
Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.12290 -
Spyderco - Manbug ZPD-189 - MGRE - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -12246 -
Spyderco - Kiwi 4 - C178GP - knife
Use: Tactical / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu12075 -
Spyderco - Delica 4 Madreperla e Marmo Picasso by SantaFe Stoneworks - C11S
Destinazione d'uso: Collezione
Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico10847 -
Spyderco - Dragonfly 2 Salt Yellow - C28YL2 - knife
Intended Use: Sport / Sub
Blade: Stainless H1 nitrogen
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: Resistant to rust and oxidation10130 -
Spyderco - Memory Centofante Pin - C155TIP - knife
Spyderco - Memory Centofante Pin - C155TIP - knife
Intended Use: Sport / Collection
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10 Treatment
Blade: -
Handle: Titanium and Glass Fiber
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Jewel case with leatherette zip
Notes: a tribute to the late Frank Centofante3809 -
Spyderco - Delica 4 FRN - C11PBK - knife
Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -
2263P -
Spyderco - Dragonfly G-10 Foliage Green - C28GFG - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG10
Trattamento Lama: -
Manicatura: G10 Foliage Green
Lunghezza lama: 57mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 81mm.
Lunghezza totale: 140mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 56g.
Chiusura: Back Lock
Clip: Reversibile ed amovibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -3816 -
Spyderco - Bob Terzuola Slipit - C131 coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: Fibra di Carbonio
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 70g.
Chiusura: Ball Joint
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Bob Terzuola3747 -
Spyderco - Chokwe - C132 coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 215mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3746 -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S -
Spyderco - Delica 4 Wave - C11PGYW coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: dark blue FRN con liners annegati in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 72g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: gancio Wave per apertura facilitata patented by Emerson Knives sviluppato originariamente per le unità speciali U.S. Navy SEALs3659 -
Spyderco - Delica 4 ZDP Full Flat - C11PGRE - knife
Destination of use: sports
Type of production: industrial
Country of production: Japan
Blade: stainless steel ZDP-189 65 / 67HRC
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon) with stainless steel embedded liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Thickness closed: 9.9mm.
Weight: 72g.
Locking system: Back Lock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Spyderco logos
Note: -3655L -
Spyderco - Persian 2 - C105GP2 coltello
Destinazione d'uso: EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 62g.
Chiusura: Back Lock
Clip: Acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: Design by Ed Schempp3757 -
Spyderco - Sage 1 Knife - Carbon Fiber - C123CFP coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CPM S30V
Trattamento Lama:
Manicatura: fibra di carbonio
Lunghezza lama: 77mm.
Spessore lama: 2.7mm.
Lunghezza chiuso 114mm.
Lunghezza totale: 181mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 92g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3717 -
Spyderco - Stretch FRN Racing Green ZDP189 Steel Plain - C90PGRE
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: liscia in acciaio inox ZDP-189
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: FRN con liners annegati in acciaio inox
Lunghezza lama: 90mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 111,5mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note:3734