Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Chris Reeve - Ti-Lock Stone Washed - NOS Full Set - PRIVATE COLLECTION - folding knife
NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificatesCR-TILSW-CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Neck Knife / CQD
Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new
Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.BO-BNMCS-CP -
Livio Montagna - Hunter knife - M390 - Stabilized Beech - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratoryKnife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.
Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -AP-HUNTER-FA -
Fox - Spartan Defender Combat Knife - SF-CC03 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.
Intended Use: Collection / All Round Utility / Tactical
Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued itemSF-CC03-AP -
Livio Montagna - Medium Bowie - PRIVATE COLLECTION - handcrafted knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory
Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -AP-MONT-BOWIE -
Livio Montagna - Arkansas Toothpick - PRIVATE COLLECTION - handcrafted knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory
Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.
The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -AP-MONT-PICK -
Puma - Jagdmesser Falknersheil - Falconer's Knife - 3592 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.
Intended Use: Collection / Vintage / Hunting
Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good conditionPU-FALK-CP -
RKP - Tunturi Puukko - COLLEZIONE PRIVATA - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in fair condition, marks on the blade due to use and years since its production
* Commercially available: no longer in production, difficult to find, probably dating back to the 1980s or 1990s
* Sharpening: not original, the knife has been used and resharpened
* Marks on the blade: scratches, logo a little discoloured, dots due to cleaned oxidation
* Marks on the handle: yes, due to use and insertion in the sheath
* Box: unboxed
* Scabbard: original, leather and fur (presumably reindeer)
* Manuals, Certificates and Warranties: absent
* Checked and certified by our in-house laboratoryIntended use: hunting/collecting
Type of production: handcrafted
Blade: Sandvik 12C27 stainless steel
Blade treatment: polishing
Country of manufacture: Finland
Handle: bone (presumably reindeer)
Blade length: 100mm
Blade thickness: 3mm
Length closed: -
Total length: 200mm
Balance: set back approx. 10mm
Weight: 82g (121g including scabbard)
Scabbard: leather with engravings
Notes: in view of the time that has elapsed and the difficulty of finding reliable production information, the above data are to be considered indicativeAP-RKP -
Raidops - Soldier Spirit RD - K082 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Allround Utility
Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collectionAP-RAID-K082 -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Rick Hinderer Knives - XM-18 - Spanto 3" Gen II - Black G10 Scales - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small abrasions.
* Marks on handle: Small marks on hardware and clip.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 2mm-thick black G10 glove on 1mm-thick 6AL4V titanium liner. Frame in 6AL4V titanium, billet, 3mm thick with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 178mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: knife from private collection, previously purchasedXM18-3-CP -
Zero Tolerance - ZT0460 - Sinkevich - Bronze Carbon Fiber - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued as of the end of 2021
* Sharpening: Factory sharpened, like new
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: -
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Bronze-colored carbon fiber and Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by SinkevichZT0460-CP -
Klotzli - 03-C Collection Series - Walker design - Titanium - PRIVATE COLLECTION - ATS-34 - knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli based on a design by the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and sturdiness Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself.
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market Out of production
* Sharpening: Factory, perfect
* Marks on blade: No
* Marks on the handle: no
* Box: Present
* Sheath: in leather
* Manuals, Certificates and Warranties: Present
* Checked and certified by our internal laboratoryIntended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 207mm.
Weight: 92g.
Closure: LinerLock
Clip: -
Notes: Design by Michael WalkerAP-KLO-03C -
Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collectionJB-RF-CP -
Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / CollectionType of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:SP-POL-07P -
Chris Reeve - Neil Roberts Warrior Knife Fixed Blade 6" - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory
Intended Use: Fighter / Tactical / Collection
Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificatesCR-NR-CP -
ExtremaRatio - BF1TD Black - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.
Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good conditionER-BF1TDBK-CP -
Laguiole Rossignol - Vintage Laguiole Limited Edition Ivory - PRIVATE COLLECTION - Knife
Knife from private collection, presumably early 1980s, in perfect, like new condition with wooden case and numbered certificate of authenticity. Limited edition specimen with serial number #0005 - Checked and certified by our in-house laboratory.
Intended use: collection
Type of production: handcrafted
Country of manufacture: France
Blade: 440A stainless steel
Handle: ivory
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 72g.
Closure: Slip Joint
Packaging: wooden case with numbered certificate of authenticity
Notes: 1980s vintage knife from private collection, in mint conditionLR-AV005-CP -
Spyderco - Endura 4 Flat FRN Gray - PRIVATE COLLECTION - C10FPGY - Knife
Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.
Intended Use: SportingType of manufacture: industrial
Blade: stainless steel VG-10
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 94g.
Locking system: Back Lock
Clip: -
Notes: knife withdrawn from private collection, clipless, overall in very good conditionSC10FPGY-CP -
Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife
Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.
Intended Use: Sporting/Tactical
Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizingCP-ZT566CF -
Spyderco - Native 5 Salt - FNR Yellow - C41PYL5 - PRIVATE COLLECTION - Knife
Knife withdrawn from private collection. Overall in very good condition, including thread. Complete with original Spyderco cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.
The very popular Native 5 Lightweight combined with the extraordinary corrosion resistance of the nitrogen-based LC200N steel.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: Nitrogen-based LC200N stainless steel
Blade Treatment: -
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -CP-C41PYL5 -
Spyderco - Native 5 Lightweight Black TiNi - C41PSBBK5 - PRIVATE COLLECTION - Knife
Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -CP-C41PSBBK5 -
Gerber - 425 Hunting Knife - Vintage 1972 - PRIVATE COLLECTION - knife
Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Hunting
Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - UnpackedGE-425HKV -
Viper - Drop Knife - Partridge Feather by Silvestrelli - 5700INPN - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.
Intended use: Collection/Sportsman/GentlemanType of production: industrial
Country of production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
Blade length: 49mm.
Blade thickness: 3mm.
Length when closed: 75mm.
Thickness when closed: 12mm.
Total length: 125mm.
Weight: 68g.
Closure: Liner Lock
Clip: absent
Scabbard: absent
Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collectionV5700INPN -
Gerber - BMF - Basic Multi Function 8 teeth - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and CorduraTranslated with www.DeepL.com/Translator (free version)
GE-BMF-CP-1 -
Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife
Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/SportsmanType of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steelC29GLTH -
Spyderco - Co-Pilot C09S knife - GIN-1 steel - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: Gin-1 stainless steel
Blade treatment: -
Handle: steel
Blade length: 50mm.
Blade thickness: 2.5mm.
Closed length: 77mm.
Total length: 126mm.
Thick when closed: 6mm
Balancing: -
Weight: 71g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box
Note:SP-C09S-AP -
Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself
Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael WalkerAP-KLO-S-W -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Gerber - BMF - Basic Multi Function - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and corduraGE-BMF-CP -
Spyderco - UK Penknife - G10 Orange - C94GPOR - PRIVATE COLLECTION - knife
Knife taken from private collection. Out of production (marketed from 2008 to 2010), like new, supplied with original Spyderco box. Checked and certified by our internal laboratory.
Intended use: sporting
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade treatment: Satin finish
Handle: G-10
Blade Length: 76mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 15mm.
Weight: 70g.
Closure: Slipjoint
Clip: removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: discontinued knife (produced from 2008 to 2010) now out of production - like new, taken from private collectionC94GPOR -
Chris Reeve - Large Sebenza 21 knife - 2010 - PRIVATE COLLECTION - knife
* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryIntended use: collection/sports
Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesCR-LS21-CP -
Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife
Intended use: Regional
Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 270mm.
Thick when closed: 19mm
Balancing: -
Weight: 105g.
Closing: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
Note: -DR-RES-27 -
Nieto - ToolKnife - PRIVATE COLLECTION - multipurpose knife
Knife withdrawn from a private collection - Like new condition, never used - Product made and patented around the end of the 90s by the Spanish Nieto. Checked and certified by our internal Collini Cutlery laboratory.
Through a rotation mechanism inside the handle, activated thanks to an unlocking pin, this multi-tool allows you to use a 13 cm blade or a 13 cm tool but complete with 16 uses.
Intended use: Survival / Sportsman
Blade: AN-556 stainless steel
Handle: Metal
Blade length: 120mm.
Blade thickness: 3mm.
Length closed: -mm.
Total length: 295mm.
Balancing: backward, 6cm from the lower guard branch
Weight: 325g.
Closing: -
Clip: -
Sheath: leather with screwdriver insert
Note: -NI-MT-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Spyderco - DAllara Rescue knife C82SBK - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -C82SBK -
Brian Tighe - Pan knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -BT-PIN-U -
Brian Tighe - Die Dagger knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -BT-DIE-T-U -
Down Under Knives - The Outback Bowie - USED - knife - L446128
USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: Hunting / Outdoor
Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.
L446128-U -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM