Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Mac Coltellerie - 630 Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -11026 -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox CutleryBC-07B -
Bark River - Bravo 1.5 Field knife - CPM 3V - Black Canvas - BA07124LT - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07124LT -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
Mac Coltellerie - Tekno Daga 2 - diving knife
Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachmentTKN10D-2N -
Mac Coltellerie - CQB Training Knife - coltello da allenamento
Destination: training knife, rounded point and dull edge
Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -11027 -
Bark River - North Star A2 - Green Canvas Micarta - 06-137M-GC
Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -10044 -
Bark River - Northstar Companion A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 3.8mm.
Lunghezza chiuso: -
Lunghezza totale: 180mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 114g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3295